[Fri Sep 23 22:15:56 2011] Detection parameters:
  Position = (353.2, 389.9) = 15 6 16.39 1 41 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.7 +/- 12.2
  Background counts = 14.9
  Rate = 0.007 +/- 0.001

[Fri Sep 23 22:15:56 2011] Off-axis axis estimate = 7.73'
[Sat Sep 24 00:19:08 2011] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 00:19:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 00:19:08 2011] Initial guess for spatial extent in simple fitting = 10.29"
[Sat Sep 24 00:19:08 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Sat Sep 24 00:19:08 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 10.29"
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src11.ximg exists
[Sat Sep 24 01:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src11.csv
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Sep 24 01:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src11.csv
[Sat Sep 24 01:51:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Sep 24 01:51:37 2011] Fit fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Sep 24 01:51:50 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.527132 pixels away
[Sat Sep 24 01:51:51 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:51:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:51:51 2011] Assessing source extent using major
[Sat Sep 24 01:51:51 2011] Source does appear to be extended
[Sat Sep 24 01:51:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 04:22:43 2011] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 04:22:43 2011] Initial guess for spatial extent in simple fitting = 10.29"
[Sat Sep 24 04:22:43 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Sat Sep 24 04:22:43 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 10.29"
[Sat Sep 24 05:52:13 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src10.ximg exists
[Sat Sep 24 05:52:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src10.csv
[Sat Sep 24 05:52:13 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Sep 24 05:52:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src10.csv
[Sat Sep 24 05:52:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:52:14 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Sep 24 05:52:14 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Sep 24 05:52:14 2011] Fit fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Sep 24 05:52:32 2011] Spatial fit model total counts = 173.970000, observed total counts = 175.000000
[Sat Sep 24 05:52:32 2011] Offset between fit and detection position for source 2 = 0.265951 pixels
[Sat Sep 24 05:52:32 2011] 172.128000 total counts/ 119.865000 bgd. counts: snr = 4.773623
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.265951 pixels
  Position = (352.9, 389.9) = 15 6 16.47 1 41 31.2
  Extent = 4.7 (3.4-6.0)", rotation angle = 0
  Source counts = 52.3 +/- 13.1
  Background counts = 119.9
  Rate = 0.003 +/- 0.0008
[Sat Sep 24 05:52:32 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:52:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:52:32 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 05:52:32 2011] Source does appear to be extended
[Sat Sep 24 05:52:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:55:46 2011] XMMSAS src. selection expression = ellipse(30656.728120, 33869.482400, 280.796675, 280.796675, 0.000000, X, Y)
[Sat Sep 24 08:55:46 2011] Writing source region out to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src2_src.reg
[Sat Sep 24 08:55:46 2011] Extracting stamp from image fullrun_mos2_xmm0021540501_pi300-10000_cl_sm2.00.img.gz, (337, 374) - (369, 406)
[Sat Sep 24 08:55:46 2011] XMMSAS bgd. selection expression = annulus(30656.728120, 33869.482400, 467.994458, 935.988917, X, Y)
[Sat Sep 24 08:55:46 2011] Writing fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src2.gif
[Sat Sep 24 09:00:37 2011] Mean detx,y = (-5083.88, 5168.67) 
[Sat Sep 24 09:00:38 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 09:00:42 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 09:00:42 2011] Setting source spectrum file to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Sep 24 09:00:42 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Sep 24 09:10:11 2011] Not generating rmf since there are only 52 counts
[Sat Sep 24 09:10:11 2011] rmf not generated due to insufficient counts
[Sat Sep 24 09:32:21 2011] Updating aperture counts using extracted products
[Sat Sep 24 09:32:21 2011] Error reading totcts from fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Sep 24 09:32:22 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:32:22 2011] Using photon index=1.80, rate=0.00317, arf fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src2.arf
[Sat Sep 24 09:32:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:32:22 2011] Updating source flux to 5.7e-14
[Sat Sep 24 09:35:33 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting