[Fri Sep 23 22:15:56 2011] Detection parameters:
  Position = (308.2, 318.9) = 15 6 29.44 1 36 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1827.3 +/- 52.2
  Background counts = 28.3
  Rate = 0.1 +/- 0.003

[Fri Sep 23 22:15:56 2011] Off-axis axis estimate = 1.65'
[Sat Sep 24 00:19:08 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 00:19:08 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Sep 24 00:19:08 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Sat Sep 24 00:19:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep 24 01:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep 24 01:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 01:51:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 01:51:37 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 01:51:37 2011] Fit fullrun_mos2_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 01:51:50 2011] Spatial fit model total counts = 3886.620000, observed total counts = 3893.000000
[Sat Sep 24 01:51:50 2011] Offset between fit and detection position for source 1 = 0.807201 pixels
[Sat Sep 24 01:51:50 2011] 3768.890000 total counts/ 1181.260000 bgd. counts: snr = 75.288636
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.807201 pixels
  Position = (308.1, 318.1) = 15 6 29.46 1 36 19.2
  Extent = 14.5 (14.4-14.5)", rotation angle = 0
  Source counts = 2587.6 +/- 61.4
  Background counts = 1181.3
  Rate = 0.2 +/- 0.004
[Sat Sep 24 01:51:51 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:51:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:51:51 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 01:51:51 2011] Source does appear to be extended
[Sat Sep 24 01:51:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:51:51 2011] Source is confused with source 19
[Sat Sep 24 04:22:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 04:22:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 04:22:43 2011] Initial guess for spatial extent in simple fitting = 14.48"
[Sat Sep 24 04:22:43 2011] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.091
[Sat Sep 24 04:22:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 14.48"
[Sat Sep 24 05:52:13 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep 24 05:52:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 05:52:13 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep 24 05:52:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src1.csv
[Sat Sep 24 05:52:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:52:14 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 05:52:14 2011] fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 05:52:14 2011] Fit fullrun_mos2_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 05:52:32 2011] Spatial fit model total counts = 6421.420000, observed total counts = 6410.000000
[Sat Sep 24 05:52:32 2011] Offset between fit and detection position for source 1 = 0.694616 pixels
[Sat Sep 24 05:52:32 2011] 6415.030000 total counts/ 3575.450000 bgd. counts: snr = 47.488533
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.694616 pixels
  Position = (307.5, 318.2) = 15 6 29.66 1 36 19.7
  Extent = 15.7 (15.1-16.6)", rotation angle = 0
  Source counts = 2839.6 +/- 80.1
  Background counts = 3575.4
  Rate = 0.2 +/- 0.005
[Sat Sep 24 05:52:32 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:52:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:52:32 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 05:52:32 2011] Source does appear to be extended
[Sat Sep 24 05:52:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:55:46 2011] Counts = 2839.580000, rescaling region sizes by 2.000000
[Sat Sep 24 08:55:46 2011] XMMSAS src. selection expression = ellipse(26700.768840, 27638.854400, 1882.920054, 1882.920054, 0.000000, X, Y)
[Sat Sep 24 08:55:46 2011] Writing source region out to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep 24 08:55:46 2011] Extracting stamp from image fullrun_mos2_xmm0021540501_pi300-10000_cl_sm2.00.img.gz, (199, 210) - (416, 426)
[Sat Sep 24 08:55:46 2011] XMMSAS bgd. selection expression = annulus(26700.768840, 27638.854400, 6276.400181, 12552.800361, X, Y) && !ellipse(27400.002655, 28500.034393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25808.327420, 29229.750000, 861.992025, 861.992025, 0.000000, X, Y) && !ellipse(28003.472000, 28365.060000, 1206.152035, 1010.744029, 231.215000, X, Y) && !ellipse(27715.778564, 27279.804169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25214.406000, 28029.917400, 1451.464042, 884.464025, 89.972887, X, Y) && !ellipse(25977.992859, 29791.034424, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25411.064453, 29096.303528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30656.728120, 33869.482400, 374.395567, 374.395567, 0.000000, X, Y) && !ellipse(28021.856000, 26296.968000, 1189.488034, 1189.488034, 0.000000, X, Y) && !ellipse(25342.118652, 26843.999695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35317.443000, 29664.768600, 538.892016, 538.892016, 0.000000, X, Y) && !ellipse(24702.992035, 28123.168915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25808.594025, 26156.947144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36321.049774, 23839.666779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24280.221100, 27694.477264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24519.197632, 28659.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.442000, 25155.246000, 1096.512032, 1096.512032, 0.000000, X, Y) && !ellipse(27731.862000, 29556.532000, 1263.208036, 1263.208036, 0.000000, X, Y) && !ellipse(28534.839172, 27788.223694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.006256, 28676.118591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26893.226593, 25628.158234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28723.588000, 25642.616000, 2115.776061, 2115.776061, 0.000000, X, Y)
[Sat Sep 24 08:55:46 2011] Writing fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src1.gif
[Sat Sep 24 08:55:49 2011] Mean detx,y = (133.46, -28.42) 
[Sat Sep 24 08:55:50 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 08:59:27 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 08:59:27 2011] Setting source spectrum file to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Sep 24 08:59:27 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Sep 24 09:32:21 2011] Updating aperture counts using extracted products
[Sat Sep 24 09:32:21 2011] Error reading totcts from fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Sep 24 09:32:21 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:32:21 2011] Using photon index=1.80, rate=0.172, arf fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src1.arf
[Sat Sep 24 09:32:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:32:21 2011] Updating source flux to 1.4e-12
[Sat Sep 24 09:35:33 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Sep 24 09:37:25 2011] Reading fit data from xmm0021540501/analysis//spectral/fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src1_pl.csv
[Sat Sep 24 09:37:25 2011] Spectral fit parameter nH value = 1.24241e+22
[Sat Sep 24 09:37:25 2011] Spectral fit parameter PhoIndex value = 9.9964
[Sat Sep 24 09:37:25 2011] Failed to get F(0.3-8.0) from xmm0021540501/analysis//spectral/fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 09:37:25 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:37:25 2011] Using Nh = 1.2e+22, photon index=10.00, rate=0.172, arf fullrun_mos2_xmm0021540501_pi300-10000_pass1_cl_src1.arf
[Sat Sep 24 09:37:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:37:25 2011] Updating source flux to 8.3e-13