[Fri Sep 23 22:15:32 2011] Detection parameters:
  Position = (316.0, 303.2) = 15 6 27.19 1 35 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.3 +/- 15.6
  Background counts = 22.7
  Rate = 0.006 +/- 0.0009

[Fri Sep 23 22:15:32 2011] Off-axis axis estimate = 1.32'
[Fri Sep 23 23:08:28 2011] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 23:08:28 2011] Initial guess for spatial extent in simple fitting = 7.09"
[Fri Sep 23 23:08:28 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.882
[Fri Sep 23 23:08:28 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 7.09"
[Sat Sep 24 00:19:06 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src12.ximg exists
[Sat Sep 24 00:19:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src12.csv
[Sat Sep 24 00:19:06 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Sep 24 00:19:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src12.csv
[Sat Sep 24 00:19:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 00:19:07 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Sep 24 00:19:07 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Sep 24 00:19:07 2011] Fit fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Sep 24 01:51:46 2011] Source 26 is offset by 6.479321 and -7.072233 pixels which is larger than
2 X fitted extent = 6.515632 x 6.515632, not incorporating fit results
[Sat Sep 24 01:51:46 2011] Source 26 is offset by -1.073900 and 1.276871 pixels which is larger than
2 X fitted extent = 4.596382 x 0.822722, not incorporating fit results
[Sat Sep 24 01:51:46 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:51:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:51:46 2011] Assessing source extent using major
[Sat Sep 24 01:51:46 2011] Source does appear to be extended
[Sat Sep 24 01:51:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:51:46 2011] Source is confused with source 3
[Sat Sep 24 03:00:35 2011] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 03:00:35 2011] Initial guess for spatial extent in simple fitting = 7.09"
[Sat Sep 24 03:00:35 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.882
[Sat Sep 24 03:00:35 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 7.09"
[Sat Sep 24 04:22:42 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_src11.ximg exists
[Sat Sep 24 04:22:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_src11.csv
[Sat Sep 24 04:22:42 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Sep 24 04:22:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_src11.csv
[Sat Sep 24 04:22:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 04:22:43 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Sep 24 04:22:43 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Sep 24 04:22:43 2011] Fit fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Sep 24 05:52:26 2011] Warning, spatial fit 11 centroid is now closest to src. 6
[Sat Sep 24 05:52:26 2011] Source 26 is offset by -1.321325 and 1.434940 pixels which is larger than
2 X fitted extent = 4.062722 x 0.850395, not incorporating fit results
[Sat Sep 24 05:52:26 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:52:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:52:26 2011] Assessing source extent using major
[Sat Sep 24 05:52:26 2011] Source does appear to be extended
[Sat Sep 24 05:52:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:44:15 2011] XMMSAS src. selection expression = ellipse(27440.252899, 26329.133759, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 07:44:15 2011] Writing source region out to fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src26_src.reg
[Sat Sep 24 07:44:15 2011] Extracting stamp from image fullrun_mos1_xmm0021540501_pi300-10000_cl_sm2.00.img.gz, (278, 266) - (353, 341)
[Sat Sep 24 07:44:15 2011] XMMSAS bgd. selection expression = annulus(27440.252899, 26329.133759, 1087.500000, 2175.000000, X, Y) && !ellipse(26730.769800, 27679.798000, 1296.688037, 1296.688037, 0.000000, X, Y) && !ellipse(26164.200684, 28663.398346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.531281, 26842.624390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25340.050385, 28403.104584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25760.390000, 29295.042000, 1212.512035, 1212.512035, 0.000000, X, Y) && !ellipse(26876.552000, 26949.432000, 1128.616032, 1128.616032, 0.000000, X, Y) && !ellipse(24802.808000, 27181.821200, 1122.792032, 1122.792032, 0.000000, X, Y) && !ellipse(25866.814000, 25677.324000, 2077.216060, 2077.216060, 0.000000, X, Y) && !ellipse(26708.465759, 25734.056732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28176.548279, 29356.520294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29270.414000, 26094.252000, 1217.824035, 1217.824035, 0.000000, X, Y) && !ellipse(24756.254000, 30295.320000, 2543.040073, 2543.040073, 0.000000, X, Y)
[Sat Sep 24 07:44:15 2011] Writing fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src26.gif
[Sat Sep 24 07:49:34 2011] Mean detx,y = (-1208.67, 195.36) 
[Sat Sep 24 07:49:35 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 07:49:41 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 07:49:41 2011] Setting source spectrum file to fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Sep 24 07:49:41 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Sep 24 08:23:50 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 08:23:50 2011] rmf not generated due to insufficient counts
[Sat Sep 24 09:32:21 2011] Updating aperture counts using extracted products
[Sat Sep 24 09:32:21 2011] Error reading totcts from fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Sep 24 09:32:21 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:32:21 2011] Using photon index=1.80, rate=0.00632, arf fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src26.arf
[Sat Sep 24 09:32:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:32:21 2011] Updating source flux to 6.1e-14
[Sat Sep 24 09:32:23 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting