[Fri Sep 23 22:15:32 2011] Detection parameters:
  Position = (308.2, 318.9) = 15 6 29.44 1 36 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1968.1 +/- 54.5
  Background counts = 26.0
  Rate = 0.1 +/- 0.003

[Fri Sep 23 22:15:32 2011] Off-axis axis estimate = 1.65'
[Fri Sep 23 23:08:28 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 23:08:28 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Sep 23 23:08:28 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Fri Sep 23 23:08:28 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sat Sep 24 00:19:06 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep 24 00:19:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 00:19:06 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep 24 00:19:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src1.csv
[Sat Sep 24 00:19:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 00:19:07 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 00:19:07 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 00:19:07 2011] Fit fullrun_mos1_xmm0021540501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 01:51:46 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Sat Sep 24 01:51:46 2011] Spatial fit model total counts = 1623.340000, observed total counts = 1619.000000
[Sat Sep 24 01:51:46 2011] Offset between fit and detection position for source 1 = 5.187018 pixels
[Sat Sep 24 01:51:46 2011] Warning, changing simple spatial fit ID from 1 to 2
[Sat Sep 24 01:51:46 2011] 1556.494000 total counts/ 1399.570000 bgd. counts: snr = 4.194615
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 5.187018 pixels
  Position = (307.4, 324.0) = 15 6 29.69 1 36 44.8
  Extent = 15.2 (15.1-30.3)", rotation angle = 0
  Source counts = 156.9 +/- 39.5
  Background counts = 1399.6
  Rate = 0.01 +/- 0.002
[Sat Sep 24 01:51:46 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:51:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:51:46 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 01:51:46 2011] Source does appear to be extended
[Sat Sep 24 01:51:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:51:46 2011] Source is confused with source 4
[Sat Sep 24 03:00:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 03:00:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 03:00:35 2011] Initial guess for spatial extent in simple fitting = 15.16"
[Sat Sep 24 03:00:35 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.008
[Sat Sep 24 03:00:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 15.16"
[Sat Sep 24 04:22:42 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep 24 04:22:42 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep 24 04:22:42 2011] Fit fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Sep 24 04:22:42 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 04:22:43 2011] fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 04:22:43 2011] Fit fullrun_mos1_xmm0021540501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 05:52:26 2011] Spatial fit model total counts = 6877.580000, observed total counts = 6873.000000
[Sat Sep 24 05:52:26 2011] Offset between fit and detection position for source 1 = 5.334379 pixels
[Sat Sep 24 05:52:26 2011] 6853.950000 total counts/ 3876.180000 bgd. counts: snr = 47.828767
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 5.334379 pixels
  Position = (307.8, 318.7) = 15 6 29.56 1 36 21.7
  Extent = 16.2 (15.4-17.3)", rotation angle = 0
  Source counts = 2977.8 +/- 82.8
  Background counts = 3876.2
  Rate = 0.2 +/- 0.005
[Sat Sep 24 05:52:26 2011] Source 1 is offset by -4.507244 and 2.567586 pixels which is larger than
2 X fitted extent = 1.836363 x 1.836363, not incorporating fit results
[Sat Sep 24 05:52:26 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:52:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:52:26 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 05:52:26 2011] Source does appear to be extended
[Sat Sep 24 05:52:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:44:14 2011] Counts = 2977.770000, rescaling region sizes by 2.000000
[Sat Sep 24 07:44:14 2011] XMMSAS src. selection expression = ellipse(26730.769800, 27679.798000, 1945.032056, 1945.032056, 0.000000, X, Y)
[Sat Sep 24 07:44:14 2011] Writing source region out to fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep 24 07:44:14 2011] Extracting stamp from image fullrun_mos1_xmm0021540501_pi300-10000_cl_sm2.00.img.gz, (196, 207) - (420, 430)
[Sat Sep 24 07:44:14 2011] XMMSAS bgd. selection expression = annulus(26730.769800, 27679.798000, 6483.440187, 12966.880373, X, Y) && !ellipse(26164.200684, 28663.398346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.531281, 26842.624390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25340.050385, 28403.104584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25760.390000, 29295.042000, 1212.512035, 1212.512035, 0.000000, X, Y) && !ellipse(26876.552000, 26949.432000, 1128.616032, 1128.616032, 0.000000, X, Y) && !ellipse(24802.808000, 27181.821200, 1122.792032, 1122.792032, 0.000000, X, Y) && !ellipse(25488.912000, 29597.370000, 1036.656030, 1036.656030, 0.000000, X, Y) && !ellipse(26525.807709, 29705.754883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30733.118469, 33855.589569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27440.252899, 26329.133759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25866.814000, 25677.324000, 2077.216060, 2077.216060, 0.000000, X, Y) && !ellipse(26708.465759, 25734.056732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28176.548279, 29356.520294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26945.846619, 29963.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29270.414000, 26094.252000, 1217.824035, 1217.824035, 0.000000, X, Y) && !ellipse(24756.254000, 30295.320000, 2543.040073, 2543.040073, 0.000000, X, Y)
[Sat Sep 24 07:44:14 2011] Writing fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src1.gif
[Sat Sep 24 07:44:18 2011] Mean detx,y = (202.80, -251.34) 
[Sat Sep 24 07:44:19 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 07:48:00 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 07:48:00 2011] Setting source spectrum file to fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Sep 24 07:48:00 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Sep 24 09:32:21 2011] Updating aperture counts using extracted products
[Sat Sep 24 09:32:21 2011] Error reading totcts from fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Sep 24 09:32:21 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:32:21 2011] Using photon index=1.80, rate=0.181, arf fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src1.arf
[Sat Sep 24 09:32:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:32:21 2011] Updating source flux to 1.5e-12
[Sat Sep 24 09:32:23 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Sat Sep 24 09:32:23 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Sep 24 09:35:33 2011] Reading fit data from xmm0021540501/analysis//spectral/fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src1_pl.csv
[Sat Sep 24 09:35:33 2011] Spectral fit parameter nH value = 1.23803e+22
[Sat Sep 24 09:35:33 2011] Spectral fit parameter PhoIndex value = 10.0
[Sat Sep 24 09:35:33 2011] Failed to get F(0.3-8.0) from xmm0021540501/analysis//spectral/fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 09:35:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 09:35:33 2011] Using Nh = 1.2e+22, photon index=10.00, rate=0.181, arf fullrun_mos1_xmm0021540501_pi300-10000_pass1_cl_src1.arf
[Sat Sep 24 09:35:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 09:35:33 2011] Updating source flux to 8.7e-13