[Mon Sep 26 22:29:09 2011] Detection parameters:
  Position = (261.2, 282.9) = 12 43 49.02 11 33 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.0 +/- 19.3
  Background counts = 119.8
  Rate = 0.002 +/- 0.0005

[Mon Sep 26 22:29:09 2011] Off-axis axis estimate = 2.92'
[Mon Sep 26 22:33:01 2011] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 22:33:01 2011] Initial guess for spatial extent in simple fitting = 7.89"
[Mon Sep 26 22:33:01 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.934
[Mon Sep 26 22:33:01 2011] Giving source the simple spatial ID 88 for pass 0, mean size = 7.89"
[Tue Sep 27 02:40:52 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src88.ximg exists
[Tue Sep 27 02:40:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src88.csv
[Tue Sep 27 02:40:52 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src88_1.ximg exists
[Tue Sep 27 02:40:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src88.csv
[Tue Sep 27 02:40:52 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:40:54 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Tue Sep 27 02:40:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src88.csv
[Tue Sep 27 02:40:54 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Tue Sep 27 02:40:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src88.csv
[Tue Sep 27 02:40:54 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:51:42 2011] Warning, spatial fit 88 centroid is now closest to src. 87
[Tue Sep 27 07:51:42 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:42 2011] Assessing source extent using major
[Tue Sep 27 07:51:42 2011] Source does appear to be extended
[Tue Sep 27 07:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:52:27 2011] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 07:52:27 2011] Initial guess for spatial extent in simple fitting = 7.89"
[Tue Sep 27 07:52:27 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.934
[Tue Sep 27 07:52:27 2011] Giving source the simple spatial ID 77 for pass 1, mean size = 7.89"
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src77.ximg exists
[Tue Sep 27 11:35:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src77.csv
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src77_1.ximg exists
[Tue Sep 27 11:35:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src77.csv
[Tue Sep 27 11:35:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:35:14 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Tue Sep 27 11:35:14 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Tue Sep 27 11:35:14 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Tue Sep 27 14:58:36 2011] Source 92 is offset by 7.449436 and -5.330521 pixels which is larger than
2 X fitted extent = 7.256046 x 7.256046, not incorporating fit results
[Tue Sep 27 14:58:36 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:36 2011] Assessing source extent using major
[Tue Sep 27 14:58:36 2011] Source does appear to be extended
[Tue Sep 27 14:58:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:59:16 2011] XMMSAS src. selection expression = ellipse(22675.324921, 24566.714691, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep 27 14:59:16 2011] Writing source region out to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src92_src.reg
[Tue Sep 27 14:59:16 2011] Extracting stamp from image fullrun_pn_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (224, 245) - (299, 320)
[Tue Sep 27 14:59:16 2011] XMMSAS bgd. selection expression = annulus(22675.324921, 24566.714691, 1087.500000, 2175.000000, X, Y) && !ellipse(25292.405400, 23925.344200, 2683.104077, 2683.104077, 0.000000, X, Y) && !ellipse(23248.334000, 23243.590000, 1284.912037, 358.628810, 16.929000, X, Y) && !ellipse(23243.496800, 23239.431400, 302.578409, 302.578409, 0.000000, X, Y) && !ellipse(24219.486000, 26816.358000, 1187.024034, 1187.024034, 0.000000, X, Y) && !ellipse(23452.304000, 22646.406000, 1256.128036, 1256.128036, 0.000000, X, Y) && !ellipse(25064.543304, 21541.834503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24805.938000, 22127.118000, 1325.616038, 1325.616038, 0.000000, X, Y) && !ellipse(23162.777679, 26816.289154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23064.299988, 25922.139008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.043945, 23767.938507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21420.797520, 23855.076200, 609.402418, 609.402418, 0.000000, X, Y) && !ellipse(23981.172000, 21807.196000, 1366.456039, 1366.456039, 0.000000, X, Y)
[Tue Sep 27 14:59:16 2011] Writing fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src92.gif
[Tue Sep 27 16:18:59 2011] Mean detx,y = (2375.51, 1458.96) 
[Tue Sep 27 16:19:02 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 16:19:17 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 16:19:17 2011] Setting source spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Tue Sep 27 16:19:17 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Tue Sep 27 23:10:19 2011] Not generating rmf since there are only 79 counts
[Tue Sep 27 23:10:19 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:25:16 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:16 2011] Error reading totcts from fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Wed Sep 28 03:25:20 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:20 2011] Using photon index=1.80, rate=0.00192, arf fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src92.arf
[Wed Sep 28 03:25:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:20 2011] Updating source flux to 4.6e-15
[Wed Sep 28 03:32:09 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting