[Mon Sep 26 22:29:08 2011] Detection parameters:
  Position = (288.8, 257.0) = 12 43 40.86 11 31 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 456.9 +/- 31.5
  Background counts = 112.6
  Rate = 0.01 +/- 0.0009

[Mon Sep 26 22:29:09 2011] Off-axis axis estimate = 3.08'
[Mon Sep 26 22:33:01 2011] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 22:33:01 2011] Initial guess for spatial extent in simple fitting = 7.97"
[Mon Sep 26 22:33:01 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.919
[Mon Sep 26 22:33:01 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 7.97"
[Tue Sep 27 02:40:51 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src43.ximg exists
[Tue Sep 27 02:40:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src43.csv
[Tue Sep 27 02:40:51 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue Sep 27 02:40:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src43.csv
[Tue Sep 27 02:40:51 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:40:53 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue Sep 27 02:40:53 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue Sep 27 02:40:53 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Tue Sep 27 07:51:42 2011] Warning, spatial fit 43 centroid is now closest to src. 14
[Tue Sep 27 07:51:42 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:42 2011] Assessing source extent using major
[Tue Sep 27 07:51:42 2011] Source does appear to be extended
[Tue Sep 27 07:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:52:27 2011] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 07:52:27 2011] Initial guess for spatial extent in simple fitting = 7.97"
[Tue Sep 27 07:52:27 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.919
[Tue Sep 27 07:52:27 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 7.97"
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src41.ximg exists
[Tue Sep 27 11:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src41.csv
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src41_1.ximg exists
[Tue Sep 27 11:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src41.csv
[Tue Sep 27 11:35:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Tue Sep 27 11:35:13 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Tue Sep 27 14:58:36 2011] Spatial fit model total counts = 2708.120000, observed total counts = 2708.000000
[Tue Sep 27 14:58:36 2011] Offset between fit and detection position for source 47 = 3.749968 pixels
[Tue Sep 27 14:58:36 2011] Warning, changing simple spatial fit ID from 41 to 40
[Tue Sep 27 14:58:36 2011] 2732.553000 total counts/ 2455.490000 bgd. counts: snr = 5.591257
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 3.749968 pixels
  Position = (285.7, 254.9) = 12 43 41.77 11 31 38.6
  Extent = 16.6 (16.5-33.1)", rotation angle = 0
  Source counts = 277.1 +/- 52.3
  Background counts = 2455.5
  Rate = 0.006 +/- 0.001
[Tue Sep 27 14:58:36 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:36 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:36 2011] Source does appear to be extended
[Tue Sep 27 14:58:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:58:36 2011] Source is confused with source 46
[Tue Sep 27 14:58:36 2011] Source is confused with source 101
[Tue Sep 27 14:59:15 2011] XMMSAS src. selection expression = ellipse(24805.938000, 22127.118000, 994.212029, 994.212029, 0.000000, X, Y)
[Tue Sep 27 14:59:15 2011] Writing source region out to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src47_src.reg
[Tue Sep 27 14:59:15 2011] Extracting stamp from image fullrun_pn_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (229, 198) - (343, 312)
[Tue Sep 27 14:59:15 2011] XMMSAS bgd. selection expression = annulus(24805.938000, 22127.118000, 1657.020048, 3314.040095, X, Y) && !ellipse(25292.405400, 23925.344200, 2683.104077, 2683.104077, 0.000000, X, Y) && !ellipse(26264.211200, 20311.877600, 344.456010, 344.456010, 0.000000, X, Y) && !ellipse(26079.246600, 22234.263200, 404.680012, 404.680012, 0.000000, X, Y) && !ellipse(26601.633588, 25485.418677, 482.931091, 317.170114, 31.679752, X, Y) && !ellipse(27007.196381, 24578.213623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.334000, 23243.590000, 1284.912037, 358.628810, 16.929000, X, Y) && !ellipse(23243.496800, 23239.431400, 302.578409, 302.578409, 0.000000, X, Y) && !ellipse(25925.638336, 22639.187317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27579.344574, 25485.046844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27903.356384, 24688.620361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23452.304000, 22646.406000, 1256.128036, 1256.128036, 0.000000, X, Y) && !ellipse(26445.350000, 22506.988000, 1037.168030, 1037.168030, 0.000000, X, Y) && !ellipse(25064.543304, 21541.834503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25759.037903, 21414.503281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27446.047080, 20184.626000, 394.541611, 394.541611, 0.000000, X, Y) && !ellipse(23064.299988, 25922.139008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.151886, 25750.363922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22675.324921, 24566.714691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.043945, 23767.938507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21420.797520, 23855.076200, 609.402418, 609.402418, 0.000000, X, Y) && !ellipse(27123.213196, 21884.627991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26396.728149, 21211.339111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23981.172000, 21807.196000, 1366.456039, 1366.456039, 0.000000, X, Y) && !ellipse(24965.821350, 21013.913788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.872040, 20321.460907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.439087, 20492.132828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23484.997345, 20407.612625, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep 27 14:59:15 2011] Writing fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src47.gif
[Tue Sep 27 15:45:24 2011] Mean detx,y = (1420.89, -1418.74) 
[Tue Sep 27 15:45:27 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 15:45:56 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 15:45:57 2011] Setting source spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue Sep 27 15:45:57 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Wed Sep 28 03:25:15 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:15 2011] Error reading totcts from fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Wed Sep 28 03:25:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:19 2011] Using photon index=1.80, rate=0.00574, arf fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src47.arf
[Wed Sep 28 03:25:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:19 2011] Updating source flux to 1.4e-14
[Wed Sep 28 03:32:09 2011] Flag c found in src. 47 procflags, skipping spectral fitting