[Mon Sep 26 22:29:08 2011] Detection parameters:
  Position = (288.7, 248.2) = 12 43 40.89 11 31 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.5 +/- 25.4
  Background counts = 104.8
  Rate = 0.005 +/- 0.0006

[Mon Sep 26 22:29:09 2011] Off-axis axis estimate = 3.71'
[Mon Sep 26 22:33:01 2011] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 22:33:01 2011] Initial guess for spatial extent in simple fitting = 8.29"
[Mon Sep 26 22:33:01 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.081
[Mon Sep 26 22:33:01 2011] Giving source the simple spatial ID 42 for pass 0, mean size = 8.29"
[Tue Sep 27 02:40:51 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src42.ximg exists
[Tue Sep 27 02:40:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src42.csv
[Tue Sep 27 02:40:51 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src42_1.ximg exists
[Tue Sep 27 02:40:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src42.csv
[Tue Sep 27 02:40:51 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:40:53 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Tue Sep 27 02:40:53 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Tue Sep 27 02:40:53 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Tue Sep 27 07:51:41 2011] Source 46 is offset by -4.387985 and -2.013764 pixels which is larger than
2 X fitted extent = 3.621706 x 7.318069, not incorporating fit results
[Tue Sep 27 07:51:42 2011] Warning, spatial fit 42 centroid is now closest to src. 100
[Tue Sep 27 07:51:42 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:42 2011] Assessing source extent using major
[Tue Sep 27 07:51:42 2011] Source does appear to be extended
[Tue Sep 27 07:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:51:42 2011] Source is confused with source 102
[Tue Sep 27 07:52:27 2011] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 07:52:27 2011] Initial guess for spatial extent in simple fitting = 8.29"
[Tue Sep 27 07:52:27 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.081
[Tue Sep 27 07:52:27 2011] Giving source the simple spatial ID 40 for pass 1, mean size = 8.29"
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src40.ximg exists
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue Sep 27 11:35:12 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src40 appears to have run properly
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue Sep 27 11:35:13 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Tue Sep 27 14:58:36 2011] Warning, spatial fit 40 centroid is now closest to src. 47
[Tue Sep 27 14:58:36 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:36 2011] Assessing source extent using major
[Tue Sep 27 14:58:36 2011] Source does appear to be extended
[Tue Sep 27 14:58:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:59:15 2011] XMMSAS src. selection expression = ellipse(25064.543304, 21541.834503, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep 27 14:59:15 2011] Writing source region out to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src46_src.reg
[Tue Sep 27 14:59:15 2011] Extracting stamp from image fullrun_pn_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (251, 211) - (326, 286)
[Tue Sep 27 14:59:15 2011] XMMSAS bgd. selection expression = annulus(25064.543304, 21541.834503, 1087.500000, 2175.000000, X, Y) && !ellipse(25292.405400, 23925.344200, 2683.104077, 2683.104077, 0.000000, X, Y) && !ellipse(26264.211200, 20311.877600, 344.456010, 344.456010, 0.000000, X, Y) && !ellipse(26079.246600, 22234.263200, 404.680012, 404.680012, 0.000000, X, Y) && !ellipse(27007.196381, 24578.213623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.334000, 23243.590000, 1284.912037, 358.628810, 16.929000, X, Y) && !ellipse(23243.496800, 23239.431400, 302.578409, 302.578409, 0.000000, X, Y) && !ellipse(25925.638336, 22639.187317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23452.304000, 22646.406000, 1256.128036, 1256.128036, 0.000000, X, Y) && !ellipse(26445.350000, 22506.988000, 1037.168030, 1037.168030, 0.000000, X, Y) && !ellipse(24805.938000, 22127.118000, 1325.616038, 1325.616038, 0.000000, X, Y) && !ellipse(25759.037903, 21414.503281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27446.047080, 20184.626000, 394.541611, 394.541611, 0.000000, X, Y) && !ellipse(22675.324921, 24566.714691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.043945, 23767.938507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27123.213196, 21884.627991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26396.728149, 21211.339111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23981.172000, 21807.196000, 1366.456039, 1366.456039, 0.000000, X, Y) && !ellipse(24965.821350, 21013.913788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.872040, 20321.460907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.439087, 20492.132828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23484.997345, 20407.612625, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep 27 14:59:15 2011] Writing fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src46.gif
[Tue Sep 27 15:44:42 2011] Mean detx,y = (1428.67, -2137.73) 
[Tue Sep 27 15:44:44 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 15:45:00 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 15:45:00 2011] Setting source spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Tue Sep 27 15:45:00 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Tue Sep 27 21:58:22 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep 27 21:58:22 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:25:15 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:15 2011] Error reading totcts from fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed Sep 28 03:25:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:19 2011] Using photon index=1.80, rate=0.00525, arf fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src46.arf
[Wed Sep 28 03:25:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:19 2011] Updating source flux to 1.3e-14
[Wed Sep 28 03:32:09 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting