[Mon Sep 26 22:29:08 2011] Detection parameters:
  Position = (261.9, 269.3) = 12 43 48.82 11 32 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 457.0 +/- 29.6
  Background counts = 117.2
  Rate = 0.01 +/- 0.0008

[Mon Sep 26 22:29:09 2011] Off-axis axis estimate = 3.39'
[Mon Sep 26 22:33:01 2011] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 22:33:01 2011] Initial guess for spatial extent in simple fitting = 8.12"
[Mon Sep 26 22:33:01 2011] source mask rpix=1.9, npix_max = 22, mask sum = 14, frac = 0.624
[Mon Sep 26 22:33:01 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 8.12"
[Tue Sep 27 02:40:51 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src38.ximg exists
[Tue Sep 27 02:40:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src38.csv
[Tue Sep 27 02:40:51 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src38_1.ximg exists
[Tue Sep 27 02:40:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src38.csv
[Tue Sep 27 02:40:51 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:40:53 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Tue Sep 27 02:40:53 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Tue Sep 27 02:40:53 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Tue Sep 27 07:51:42 2011] Warning, spatial fit 38 centroid is now closest to src. 15
[Tue Sep 27 07:51:42 2011] Spatial fit model total counts = 2716.830000, observed total counts = 2709.000000
[Tue Sep 27 07:51:42 2011] Offset between fit and detection position for source 41 = 5.717058 pixels
[Tue Sep 27 07:51:42 2011] Warning, changing simple spatial fit ID from 38 to 90
[Tue Sep 27 07:51:42 2011] 2811.787000 total counts/ 1910.000000 bgd. counts: snr = 20.634183
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 5.717058 pixels
  Position = (267.3, 267.6) = 12 43 47.21 11 32 33.9
  Extent = 16.0 (16.0-16.0)", rotation angle = 0
  Source counts = 901.8 +/- 53.0
  Background counts = 1910.0
  Rate = 0.02 +/- 0.001
[Tue Sep 27 07:51:42 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:42 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:51:42 2011] Source does appear to be extended
[Tue Sep 27 07:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:51:42 2011] Source is confused with source 14
[Tue Sep 27 07:52:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 07:52:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 07:52:27 2011] Initial guess for spatial extent in simple fitting = 16.02"
[Tue Sep 27 07:52:27 2011] source mask rpix=3.7, npix_max = 70, mask sum = 80, frac = 1.143
[Tue Sep 27 07:52:27 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 16.02"
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src36.ximg exists
[Tue Sep 27 11:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src36.csv
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src36_1.ximg exists
[Tue Sep 27 11:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src36.csv
[Tue Sep 27 11:35:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Tue Sep 27 11:35:13 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Tue Sep 27 14:58:36 2011] Spatial fit model total counts = 6975.080000, observed total counts = 6975.000000
[Tue Sep 27 14:58:36 2011] Offset between fit and detection position for source 41 = 7.310695 pixels
[Tue Sep 27 14:58:36 2011] Warning, changing simple spatial fit ID from 36 to 14
[Tue Sep 27 14:58:36 2011] 6262.290000 total counts/ 5079.260000 bgd. counts: snr = 16.599520
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 7.310695 pixels
  Position = (270.1, 260.9) = 12 43 46.38 11 32 4.5
  Extent = 15.7 (15.7-31.4)", rotation angle = 0
  Source counts = 1183.0 +/- 79.1
  Background counts = 5079.3
  Rate = 0.02 +/- 0.002
[Tue Sep 27 14:58:36 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:36 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:36 2011] Source does appear to be extended
[Tue Sep 27 14:58:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:59:15 2011] Counts = 1183.030000, rescaling region sizes by 2.000000
[Tue Sep 27 14:59:15 2011] XMMSAS src. selection expression = ellipse(23452.304000, 22646.406000, 1884.192054, 1884.192054, 0.000000, X, Y)
[Tue Sep 27 14:59:15 2011] Writing source region out to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src41_src.reg
[Tue Sep 27 14:59:15 2011] Extracting stamp from image fullrun_pn_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (162, 153) - (378, 369)
[Tue Sep 27 14:59:15 2011] XMMSAS bgd. selection expression = annulus(23452.304000, 22646.406000, 6280.640181, 12561.280361, X, Y) && !ellipse(25292.405400, 23925.344200, 2683.104077, 2683.104077, 0.000000, X, Y) && !ellipse(26264.211200, 20311.877600, 344.456010, 344.456010, 0.000000, X, Y) && !ellipse(16781.931168, 24382.800812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32698.949400, 30929.986800, 441.686413, 441.686413, 0.000000, X, Y) && !ellipse(17358.130160, 26620.767800, 434.879213, 434.879213, 0.000000, X, Y) && !ellipse(26079.246600, 22234.263200, 404.680012, 404.680012, 0.000000, X, Y) && !ellipse(27597.218231, 31955.114288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18963.931152, 29688.921997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26601.633588, 25485.418677, 482.931091, 317.170114, 31.679752, X, Y) && !ellipse(27007.196381, 24578.213623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.334000, 23243.590000, 1284.912037, 358.628810, 16.929000, X, Y) && !ellipse(23243.496800, 23239.431400, 302.578409, 302.578409, 0.000000, X, Y) && !ellipse(25925.638336, 22639.187317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27147.400513, 9801.219948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33824.958496, 35698.580811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.296570, 33204.979950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17575.306944, 32942.202331, 428.863641, 306.289343, 91.773465, X, Y) && !ellipse(23179.210242, 32865.850600, 666.579219, 666.579219, 0.000000, X, Y) && !ellipse(30055.368514, 10650.385698, 710.056225, 406.425969, 338.514507, X, Y) && !ellipse(24219.486000, 26816.358000, 1187.024034, 1187.024034, 0.000000, X, Y) && !ellipse(32664.617767, 27226.703583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14577.222717, 25990.511322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27504.388600, 26036.597400, 589.328817, 589.328817, 0.000000, X, Y) && !ellipse(27579.344574, 25485.046844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17495.463654, 25350.054535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27903.356384, 24688.620361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10462.531326, 24743.186523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22821.611200, 12141.660000, 558.172016, 558.172016, 0.000000, X, Y) && !ellipse(26445.350000, 22506.988000, 1037.168030, 1037.168030, 0.000000, X, Y) && !ellipse(18179.561157, 22293.502502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35713.345560, 21726.851200, 740.677175, 740.677175, 0.000000, X, Y) && !ellipse(25064.543304, 21541.834503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24805.938000, 22127.118000, 1325.616038, 1325.616038, 0.000000, X, Y) && !ellipse(25655.643200, 12526.839000, 398.324011, 398.324011, 0.000000, X, Y) && !ellipse(25759.037903, 21414.503281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27446.047080, 20184.626000, 394.541611, 394.541611, 0.000000, X, Y) && !ellipse(21363.998220, 13267.118400, 483.311214, 483.311214, 0.000000, X, Y) && !ellipse(26052.187494, 17801.030800, 371.110411, 371.110411, 0.000000, X, Y) && !ellipse(29656.424438, 17328.762329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23093.751412, 16304.623600, 397.067211, 397.067211, 0.000000, X, Y) && !ellipse(21154.844600, 15839.131400, 390.226411, 390.226411, 0.000000, X, Y) && !ellipse(15980.555710, 13474.802780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20252.100000, 35529.670000, 1809.656052, 1809.656052, 0.000000, X, Y) && !ellipse(20644.843475, 34674.528046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20875.338000, 33970.030000, 3112.208090, 3112.208090, 0.000000, X, Y) && !ellipse(36096.633819, 33275.488296, 770.748974, 360.241325, 78.330465, X, Y) && !ellipse(21257.712000, 33148.288000, 1556.792045, 1556.792045, 0.000000, X, Y) && !ellipse(21644.675735, 32589.294586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22273.954082, 30993.371437, 2285.560066, 1046.506902, 64.944640, X, Y) && !ellipse(22255.506000, 31177.054000, 1491.088043, 1491.088043, 0.000000, X, Y) && !ellipse(22478.722460, 30212.346000, 1382.760040, 697.448820, 244.632000, X, Y) && !ellipse(23078.144262, 29064.919677, 1323.184038, 604.491220, 242.810325, X, Y) && !ellipse(23051.066600, 28818.724000, 1272.312037, 1272.312037, 0.000000, X, Y) && !ellipse(23162.777679, 26816.289154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29162.264400, 26434.647600, 513.244015, 513.244015, 0.000000, X, Y) && !ellipse(23064.299988, 25922.139008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33790.282000, 25890.376160, 730.277621, 730.277621, 0.000000, X, Y) && !ellipse(28279.151886, 25750.363922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28822.007120, 24995.394800, 427.546412, 427.546412, 0.000000, X, Y) && !ellipse(33192.606500, 24690.913000, 829.152024, 343.204810, 77.205000, X, Y) && !ellipse(22675.324921, 24566.714691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.043945, 23767.938507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21420.797520, 23855.076200, 609.402418, 609.402418, 0.000000, X, Y) && !ellipse(27123.213196, 21884.627991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26396.728149, 21211.339111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23981.172000, 21807.196000, 1366.456039, 1366.456039, 0.000000, X, Y) && !ellipse(24965.821350, 21013.913788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30952.117400, 20511.142000, 1213.016035, 860.528025, 85.027116, X, Y) && !ellipse(27985.872040, 20321.460907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.439087, 20492.132828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23484.997345, 20407.612625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29046.862600, 19739.157000, 308.567209, 308.567209, 0.000000, X, Y) && !ellipse(20205.722870, 17953.154861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25164.202484, 13557.718018, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep 27 14:59:15 2011] Writing fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src41.gif
[Tue Sep 27 15:37:10 2011] Mean detx,y = (1609.46, -281.12) 
[Tue Sep 27 15:37:19 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 15:42:15 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 15:42:15 2011] Setting source spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Sep 27 15:42:15 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed Sep 28 03:25:15 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:15 2011] Error reading totcts from fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed Sep 28 03:25:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:19 2011] Using photon index=1.80, rate=0.0245, arf fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src41.arf
[Wed Sep 28 03:25:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:19 2011] Updating source flux to 5.5e-14
[Wed Sep 28 03:32:09 2011] Flag c found in src. 41 procflags, skipping spectral fitting