[Mon Sep 26 22:29:07 2011] Detection parameters:
  Position = (434.3, 316.8) = 12 42 57.78 11 36 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1294.8 +/- 43.5
  Background counts = 49.5
  Rate = 0.03 +/- 0.0009

[Mon Sep 26 22:29:09 2011] Off-axis axis estimate = 9.94'
[Mon Sep 26 22:33:01 2011] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 22:33:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 22:33:01 2011] Initial guess for spatial extent in simple fitting = 11.40"
[Mon Sep 26 22:33:01 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.924
[Mon Sep 26 22:33:01 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 11.40"
[Tue Sep 27 02:40:50 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src4.ximg exists
[Tue Sep 27 02:40:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src4.csv
[Tue Sep 27 02:40:50 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Sep 27 02:40:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src4.csv
[Tue Sep 27 02:40:50 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:40:52 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Sep 27 02:40:52 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Sep 27 02:40:52 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Sep 27 07:51:41 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.855868 pixels away
[Tue Sep 27 07:51:42 2011] Source 4 is offset by 4.614976 and -2.553239 pixels which is larger than
2 X fitted extent = 1.273687 x 1.273687, not incorporating fit results
[Tue Sep 27 07:51:42 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:42 2011] Assessing source extent using major
[Tue Sep 27 07:51:42 2011] Source does appear to be extended
[Tue Sep 27 07:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:52:27 2011] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 07:52:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 07:52:27 2011] Initial guess for spatial extent in simple fitting = 11.40"
[Tue Sep 27 07:52:27 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.924
[Tue Sep 27 07:52:27 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 11.40"
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src4.ximg exists
[Tue Sep 27 11:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src4.csv
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Sep 27 11:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src4.csv
[Tue Sep 27 11:35:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Sep 27 11:35:13 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Sep 27 14:58:36 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.994095 pixels away
[Tue Sep 27 14:58:36 2011] Source 4 is offset by 9.216240 and 3.054646 pixels which is larger than
2 X fitted extent = 1.960101 x 1.960101, not incorporating fit results
[Tue Sep 27 14:58:36 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:36 2011] Assessing source extent using major
[Tue Sep 27 14:58:36 2011] Source does appear to be extended
[Tue Sep 27 14:58:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:59:14 2011] Counts = 1294.755249, rescaling region sizes by 2.000000
[Tue Sep 27 14:59:14 2011] XMMSAS src. selection expression = ellipse(37733.474915, 27514.644165, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Sep 27 14:59:14 2011] Writing source region out to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src4_src.reg
[Tue Sep 27 14:59:14 2011] Extracting stamp from image fullrun_pn_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (359, 242) - (509, 392)
[Tue Sep 27 14:59:14 2011] XMMSAS bgd. selection expression = annulus(37733.474915, 27514.644165, 4350.000000, 8700.000000, X, Y) && !ellipse(32698.949400, 30929.986800, 441.686413, 441.686413, 0.000000, X, Y) && !ellipse(36925.702250, 27256.942080, 484.934414, 484.934414, 0.000000, X, Y) && !ellipse(41781.321960, 31102.698547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43621.005035, 23022.069092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39903.300262, 33426.358948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33824.958496, 35698.580811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32664.617767, 27226.703583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37552.993988, 26667.084473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35713.345560, 21726.851200, 740.677175, 740.677175, 0.000000, X, Y) && !ellipse(37930.653320, 20006.277069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38992.964600, 18625.378920, 1025.288030, 1025.288030, 0.000000, X, Y) && !ellipse(36096.633819, 33275.488296, 770.748974, 360.241325, 78.330465, X, Y) && !ellipse(29162.264400, 26434.647600, 513.244015, 513.244015, 0.000000, X, Y) && !ellipse(33790.282000, 25890.376160, 730.277621, 730.277621, 0.000000, X, Y) && !ellipse(28279.151886, 25750.363922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28822.007120, 24995.394800, 427.546412, 427.546412, 0.000000, X, Y) && !ellipse(33192.606500, 24690.913000, 829.152024, 343.204810, 77.205000, X, Y) && !ellipse(30952.117400, 20511.142000, 1213.016035, 860.528025, 85.027116, X, Y) && !ellipse(29046.862600, 19739.157000, 308.567209, 308.567209, 0.000000, X, Y)
[Tue Sep 27 14:59:14 2011] Writing fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src4.gif
[Tue Sep 27 15:12:47 2011] Mean detx,y = (-12246.45, -1795.61) 
[Tue Sep 27 15:12:54 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 15:14:45 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 15:14:45 2011] Setting source spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Sep 27 15:14:45 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Sep 27 18:44:34 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep 27 18:44:34 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:25:14 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:14 2011] Error reading totcts from fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Sep 28 03:25:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:17 2011] Using photon index=1.80, rate=0.0265, arf fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src4.arf
[Wed Sep 28 03:25:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:17 2011] Updating source flux to 1.5e-13
[Wed Sep 28 03:32:09 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting