[Mon Sep 26 22:29:07 2011] Detection parameters:
  Position = (193.5, 280.8) = 12 44 9.07 11 33 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2608.1 +/- 58.9
  Background counts = 61.8
  Rate = 0.1 +/- 0.002

[Mon Sep 26 22:29:09 2011] Off-axis axis estimate = 7.72'
[Mon Sep 26 22:33:01 2011] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 22:33:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 22:33:01 2011] Initial guess for spatial extent in simple fitting = 10.29"
[Mon Sep 26 22:33:01 2011] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.731
[Mon Sep 26 22:33:01 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.29"
[Tue Sep 27 02:40:50 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Sep 27 02:40:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src3.csv
[Tue Sep 27 02:40:50 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Sep 27 02:40:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src3.csv
[Tue Sep 27 02:40:50 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:40:52 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep 27 02:40:52 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep 27 02:40:52 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Sep 27 07:51:41 2011] Warning, spatial fit 3 centroid is now closest to src. 36
[Tue Sep 27 07:51:42 2011] Source 3 is offset by 1.579898 and -4.206358 pixels which is larger than
2 X fitted extent = 1.143080 x 1.143080, not incorporating fit results
[Tue Sep 27 07:51:42 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:42 2011] Assessing source extent using major
[Tue Sep 27 07:51:42 2011] Source does appear to be extended
[Tue Sep 27 07:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:52:27 2011] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 07:52:27 2011] Initial guess for spatial extent in simple fitting = 10.29"
[Tue Sep 27 07:52:27 2011] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.731
[Tue Sep 27 07:52:27 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 10.29"
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Sep 27 11:35:12 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src3.csv
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Sep 27 11:35:12 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src3.csv
[Tue Sep 27 11:35:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Sep 27 11:35:13 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Sep 27 14:58:36 2011] Warning, spatial fit 3 centroid is now closest to src. 36
[Tue Sep 27 14:58:36 2011] Source 3 is offset by 1.588450 and -4.196244 pixels which is larger than
2 X fitted extent = 1.148662 x 1.148662, not incorporating fit results
[Tue Sep 27 14:58:36 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:36 2011] Assessing source extent using major
[Tue Sep 27 14:58:36 2011] Source does appear to be extended
[Tue Sep 27 14:58:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:59:14 2011] Counts = 2608.109131, rescaling region sizes by 2.000000
[Tue Sep 27 14:59:14 2011] XMMSAS src. selection expression = ellipse(16781.931168, 24382.800812, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Sep 27 14:59:14 2011] Writing source region out to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src3_src.reg
[Tue Sep 27 14:59:14 2011] Extracting stamp from image fullrun_pn_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (118, 206) - (268, 356)
[Tue Sep 27 14:59:14 2011] XMMSAS bgd. selection expression = annulus(16781.931168, 24382.800812, 4350.000000, 8700.000000, X, Y) && !ellipse(25292.405400, 23925.344200, 2683.104077, 2683.104077, 0.000000, X, Y) && !ellipse(17358.130160, 26620.767800, 434.879213, 434.879213, 0.000000, X, Y) && !ellipse(18963.931152, 29688.921997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.334000, 23243.590000, 1284.912037, 358.628810, 16.929000, X, Y) && !ellipse(23243.496800, 23239.431400, 302.578409, 302.578409, 0.000000, X, Y) && !ellipse(25925.638336, 22639.187317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.296570, 33204.979950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17575.306944, 32942.202331, 428.863641, 306.289343, 91.773465, X, Y) && !ellipse(23179.210242, 32865.850600, 666.579219, 666.579219, 0.000000, X, Y) && !ellipse(24219.486000, 26816.358000, 1187.024034, 1187.024034, 0.000000, X, Y) && !ellipse(14577.222717, 25990.511322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17495.463654, 25350.054535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10462.531326, 24743.186523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23452.304000, 22646.406000, 1256.128036, 1256.128036, 0.000000, X, Y) && !ellipse(26445.350000, 22506.988000, 1037.168030, 1037.168030, 0.000000, X, Y) && !ellipse(18179.561157, 22293.502502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25064.543304, 21541.834503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24805.938000, 22127.118000, 1325.616038, 1325.616038, 0.000000, X, Y) && !ellipse(25759.037903, 21414.503281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23093.751412, 16304.623600, 397.067211, 397.067211, 0.000000, X, Y) && !ellipse(21154.844600, 15839.131400, 390.226411, 390.226411, 0.000000, X, Y) && !ellipse(20875.338000, 33970.030000, 3112.208090, 3112.208090, 0.000000, X, Y) && !ellipse(21257.712000, 33148.288000, 1556.792045, 1556.792045, 0.000000, X, Y) && !ellipse(21644.675735, 32589.294586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22273.954082, 30993.371437, 2285.560066, 1046.506902, 64.944640, X, Y) && !ellipse(22255.506000, 31177.054000, 1491.088043, 1491.088043, 0.000000, X, Y) && !ellipse(22478.722460, 30212.346000, 1382.760040, 697.448820, 244.632000, X, Y) && !ellipse(23078.144262, 29064.919677, 1323.184038, 604.491220, 242.810325, X, Y) && !ellipse(23051.066600, 28818.724000, 1272.312037, 1272.312037, 0.000000, X, Y) && !ellipse(23162.777679, 26816.289154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23064.299988, 25922.139008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22675.324921, 24566.714691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.043945, 23767.938507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21420.797520, 23855.076200, 609.402418, 609.402418, 0.000000, X, Y) && !ellipse(23981.172000, 21807.196000, 1366.456039, 1366.456039, 0.000000, X, Y) && !ellipse(24965.821350, 21013.913788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.439087, 20492.132828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23484.997345, 20407.612625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20205.722870, 17953.154861, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep 27 14:59:14 2011] Writing fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src3.gif
[Tue Sep 27 15:10:16 2011] Mean detx,y = (7870.87, 3744.01) 
[Tue Sep 27 15:10:22 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 15:12:18 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 15:12:18 2011] Setting source spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Sep 27 15:12:18 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Sep 27 18:44:24 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep 27 18:44:24 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:25:14 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:14 2011] Error reading totcts from fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Sep 28 03:25:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:17 2011] Using photon index=1.80, rate=0.102, arf fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src3.arf
[Wed Sep 28 03:25:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:17 2011] Updating source flux to 3.4e-13
[Wed Sep 28 03:32:09 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting