[Mon Sep 26 22:29:07 2011] Detection parameters:
  Position = (303.0, 233.6) = 12 43 36.65 11 30 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2115.1 +/- 56.1
  Background counts = 87.8
  Rate = 0.08 +/- 0.002

[Mon Sep 26 22:29:09 2011] Off-axis axis estimate = 4.71'
[Mon Sep 26 22:33:01 2011] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 22:33:01 2011] Initial guess for spatial extent in simple fitting = 8.78"
[Mon Sep 26 22:33:01 2011] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.749
[Mon Sep 26 22:33:01 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 8.78"
[Tue Sep 27 02:40:50 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src2.ximg exists
[Tue Sep 27 02:40:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src2.csv
[Tue Sep 27 02:40:50 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Sep 27 02:40:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src2.csv
[Tue Sep 27 02:40:50 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:40:52 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Sep 27 02:40:52 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Sep 27 02:40:52 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Sep 27 07:51:41 2011] Spatial fit model total counts = 2799.340000, observed total counts = 2804.000000
[Tue Sep 27 07:51:41 2011] Offset between fit and detection position for source 2 = 0.667228 pixels
[Tue Sep 27 07:51:41 2011] 2766.390000 total counts/ 1436.180000 bgd. counts: snr = 35.100699
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.667228 pixels
  Position = (302.5, 234.0) = 12 43 36.81 11 30 7.8
  Extent = 4.3 (4.1-4.5)", rotation angle = 0
  Source counts = 1330.2 +/- 52.6
  Background counts = 1436.2
  Rate = 0.03 +/- 0.001
[Tue Sep 27 07:51:42 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:42 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:51:42 2011] Source does appear to be extended
[Tue Sep 27 07:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:52:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 07:52:27 2011] Initial guess for spatial extent in simple fitting = 4.25"
[Tue Sep 27 07:52:27 2011] source mask rpix=1.0, npix_max = 8, mask sum = 7, frac = 0.802
[Tue Sep 27 07:52:27 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 4.25"
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src2.ximg exists
[Tue Sep 27 11:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src2.csv
[Tue Sep 27 11:35:12 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Sep 27 11:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src2.csv
[Tue Sep 27 11:35:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Sep 27 11:35:13 2011] fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Sep 27 11:35:13 2011] Fit fullrun_pn_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Sep 27 14:58:36 2011] Spatial fit model total counts = 2837.740000, observed total counts = 2846.000000
[Tue Sep 27 14:58:36 2011] Offset between fit and detection position for source 2 = 0.012491 pixels
[Tue Sep 27 14:58:36 2011] 2834.810000 total counts/ 1493.880000 bgd. counts: snr = 34.693511
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.012491 pixels
  Position = (302.4, 234.0) = 12 43 36.81 11 30 7.8
  Extent = 4.3 (4.1-4.5)", rotation angle = 0
  Source counts = 1340.9 +/- 53.2
  Background counts = 1493.9
  Rate = 0.03 +/- 0.001
[Tue Sep 27 14:58:36 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:36 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:36 2011] Source does appear to be extended
[Tue Sep 27 14:58:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:59:14 2011] Counts = 1340.930000, rescaling region sizes by 2.000000
[Tue Sep 27 14:59:14 2011] XMMSAS src. selection expression = ellipse(26264.211200, 20311.877600, 516.684015, 516.684015, 0.000000, X, Y)
[Tue Sep 27 14:59:14 2011] Writing source region out to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src2_src.reg
[Tue Sep 27 14:59:14 2011] Extracting stamp from image fullrun_pn_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (273, 204) - (332, 264)
[Tue Sep 27 14:59:14 2011] XMMSAS bgd. selection expression = annulus(26264.211200, 20311.877600, 1722.280050, 3444.560099, X, Y) && !ellipse(25292.405400, 23925.344200, 2683.104077, 2683.104077, 0.000000, X, Y) && !ellipse(26079.246600, 22234.263200, 404.680012, 404.680012, 0.000000, X, Y) && !ellipse(27007.196381, 24578.213623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.334000, 23243.590000, 1284.912037, 358.628810, 16.929000, X, Y) && !ellipse(23243.496800, 23239.431400, 302.578409, 302.578409, 0.000000, X, Y) && !ellipse(25925.638336, 22639.187317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23452.304000, 22646.406000, 1256.128036, 1256.128036, 0.000000, X, Y) && !ellipse(26445.350000, 22506.988000, 1037.168030, 1037.168030, 0.000000, X, Y) && !ellipse(25064.543304, 21541.834503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24805.938000, 22127.118000, 1325.616038, 1325.616038, 0.000000, X, Y) && !ellipse(25759.037903, 21414.503281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27446.047080, 20184.626000, 394.541611, 394.541611, 0.000000, X, Y) && !ellipse(26052.187494, 17801.030800, 371.110411, 371.110411, 0.000000, X, Y) && !ellipse(29656.424438, 17328.762329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22675.324921, 24566.714691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.043945, 23767.938507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27123.213196, 21884.627991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26396.728149, 21211.339111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23981.172000, 21807.196000, 1366.456039, 1366.456039, 0.000000, X, Y) && !ellipse(24965.821350, 21013.913788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.872040, 20321.460907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.439087, 20492.132828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23484.997345, 20407.612625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29046.862600, 19739.157000, 308.567209, 308.567209, 0.000000, X, Y)
[Tue Sep 27 14:59:14 2011] Writing fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src2.gif
[Tue Sep 27 15:09:25 2011] Mean detx,y = (879.02, -3799.28) 
[Tue Sep 27 15:09:29 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 15:09:51 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 15:09:51 2011] Setting source spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Sep 27 15:09:51 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Sep 28 03:25:14 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:14 2011] Error reading totcts from fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Sep 28 03:25:16 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:16 2011] Using photon index=1.80, rate=0.0278, arf fullrun_pn_xmm0021540201_pi300-10000_pass1_cl_src2.arf
[Wed Sep 28 03:25:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:17 2011] Updating source flux to 8.9e-14