[Mon Sep 26 22:30:13 2011] Detection parameters:
  Position = (304.8, 251.0) = 12 43 36.10 11 31 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.7 +/- 14.2
  Background counts = 41.1
  Rate = 0.001 +/- 0.0003

[Mon Sep 26 22:30:13 2011] Off-axis axis estimate = 3.47'
[Tue Sep 27 05:52:31 2011] Using EEF radius (= 8.16 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 05:52:31 2011] Initial guess for spatial extent in simple fitting = 8.16"
[Tue Sep 27 05:52:31 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.885
[Tue Sep 27 05:52:31 2011] Giving source the simple spatial ID 53 for pass 0, mean size = 8.16"
[Tue Sep 27 07:51:21 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src53.ximg exists
[Tue Sep 27 07:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src53.csv
[Tue Sep 27 07:51:21 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src53_1.ximg exists
[Tue Sep 27 07:51:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src53.csv
[Tue Sep 27 07:51:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:51:23 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Tue Sep 27 07:51:23 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Tue Sep 27 07:51:23 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Tue Sep 27 07:52:08 2011] Spatial fit model total counts = 1147.160000, observed total counts = 1149.000000
[Tue Sep 27 07:52:08 2011] Offset between fit and detection position for source 63 = 7.390997 pixels
[Tue Sep 27 07:52:08 2011] 1166.415000 total counts/ 938.598000 bgd. counts: snr = 7.436119
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 7.390997 pixels
  Position = (308.3, 244.5) = 12 43 35.08 11 30 53.3
  Extent = 16.3 (16.3-32.7)", rotation angle = 0
  Source counts = 227.8 +/- 34.2
  Background counts = 938.6
  Rate = 0.004 +/- 0.0007
[Tue Sep 27 07:52:09 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:52:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:52:09 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:52:09 2011] Source does appear to be extended
[Tue Sep 27 07:52:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:26:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:26:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 13:26:37 2011] Initial guess for spatial extent in simple fitting = 16.33"
[Tue Sep 27 13:26:37 2011] source mask rpix=3.8, npix_max = 72, mask sum = 81, frac = 1.119
[Tue Sep 27 13:26:37 2011] Giving source the simple spatial ID 44 for pass 1, mean size = 16.33"
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src44.ximg exists
[Tue Sep 27 14:58:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src44.csv
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src44_1.ximg exists
[Tue Sep 27 14:58:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src44.csv
[Tue Sep 27 14:58:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Tue Sep 27 14:58:19 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Tue Sep 27 14:58:57 2011] Warning, spatial fit 44 centroid is now closest to src. 62
[Tue Sep 27 14:58:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:57 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:57 2011] Source does appear to be extended
[Tue Sep 27 14:58:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 01:57:43 2011] XMMSAS src. selection expression = ellipse(26774.682000, 21222.462000, 979.554028, 979.554028, 0.000000, X, Y)
[Wed Sep 28 01:57:43 2011] Writing source region out to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src63_src.reg
[Wed Sep 28 01:57:43 2011] Extracting stamp from image fullrun_mos2_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (252, 188) - (365, 301)
[Wed Sep 28 01:57:43 2011] XMMSAS bgd. selection expression = annulus(26774.682000, 21222.462000, 1632.590047, 3265.180094, X, Y) && !ellipse(25309.907660, 23946.979000, 2208.223264, 2208.223264, 0.000000, X, Y) && !ellipse(24552.064240, 23860.383972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26215.445540, 20316.628600, 349.813610, 349.813610, 0.000000, X, Y) && !ellipse(26071.964000, 22224.696000, 410.666412, 410.666412, 0.000000, X, Y) && !ellipse(23242.357800, 23260.607600, 347.691210, 273.329608, 40.128000, X, Y) && !ellipse(26771.233307, 23101.794312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27043.076000, 24853.876000, 784.788823, 784.788823, 0.000000, X, Y) && !ellipse(27293.197400, 23329.865000, 371.203211, 371.203211, 0.000000, X, Y) && !ellipse(23103.122000, 23319.531600, 1292.688037, 1292.688037, 0.000000, X, Y) && !ellipse(25351.210000, 25089.122000, 1054.760030, 1054.760030, 0.000000, X, Y) && !ellipse(27454.330620, 20185.086400, 353.691210, 353.691210, 0.000000, X, Y) && !ellipse(23430.601105, 24486.100037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.878200, 21745.860000, 349.768810, 349.768810, 0.000000, X, Y) && !ellipse(27627.788840, 22220.912800, 424.148012, 424.148012, 0.000000, X, Y) && !ellipse(27698.050934, 23904.574280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28243.956818, 24124.731964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24467.082062, 21960.999908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27625.961578, 25341.696503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.942749, 17786.099091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25524.562000, 21436.674000, 1299.728037, 1299.728037, 0.000000, X, Y) && !ellipse(24278.836600, 20302.681400, 1181.360034, 281.816008, 346.536000, X, Y)
[Wed Sep 28 01:57:43 2011] Writing fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src63.gif
[Wed Sep 28 02:19:28 2011] Mean detx,y = (106.50, 2993.25) 
[Wed Sep 28 02:19:30 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 02:19:44 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 02:19:45 2011] Setting source spectrum file to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Wed Sep 28 02:19:45 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Wed Sep 28 03:25:29 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:30 2011] Error reading totcts from fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Wed Sep 28 03:25:32 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:32 2011] Using photon index=1.80, rate=0.00444, arf fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src63.arf
[Wed Sep 28 03:25:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:32 2011] Updating source flux to 4.9e-14