[Mon Sep 26 22:30:13 2011] Detection parameters:
  Position = (287.1, 253.1) = 12 43 41.34 11 31 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.5 +/- 14.6
  Background counts = 42.9
  Rate = 0.001 +/- 0.0003

[Mon Sep 26 22:30:13 2011] Off-axis axis estimate = 3.39'
[Tue Sep 27 05:52:31 2011] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 05:52:31 2011] Initial guess for spatial extent in simple fitting = 8.12"
[Tue Sep 27 05:52:31 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.892
[Tue Sep 27 05:52:31 2011] Giving source the simple spatial ID 52 for pass 0, mean size = 8.12"
[Tue Sep 27 07:51:21 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src52.ximg exists
[Tue Sep 27 07:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src52.csv
[Tue Sep 27 07:51:21 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src52_1.ximg exists
[Tue Sep 27 07:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src52.csv
[Tue Sep 27 07:51:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:51:23 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Tue Sep 27 07:51:23 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Tue Sep 27 07:51:23 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Tue Sep 27 07:52:08 2011] Spatial fit model total counts = 1140.910000, observed total counts = 1142.000000
[Tue Sep 27 07:52:08 2011] Offset between fit and detection position for source 62 = 9.154462 pixels
[Tue Sep 27 07:52:08 2011] 1163.624800 total counts/ 1066.840000 bgd. counts: snr = 2.963176
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 9.154462 pixels
  Position = (293.9, 247.0) = 12 43 39.33 11 31 4.1
  Extent = 16.2 (16.2-32.5)", rotation angle = 0
  Source counts = 96.8 +/- 34.1
  Background counts = 1066.8
  Rate = 0.002 +/- 0.0007
[Tue Sep 27 07:52:08 2011] Source 62 is offset by 6.895034 and 4.881448 pixels which is larger than
2 X fitted extent = 1.533545 x 1.533545, not incorporating fit results
[Tue Sep 27 07:52:09 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:52:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:52:09 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:52:09 2011] Source does appear to be extended
[Tue Sep 27 07:52:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:52:09 2011] Source is confused with source 11
[Tue Sep 27 13:26:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:26:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 13:26:37 2011] Initial guess for spatial extent in simple fitting = 16.25"
[Tue Sep 27 13:26:37 2011] source mask rpix=3.7, npix_max = 71, mask sum = 56, frac = 0.781
[Tue Sep 27 13:26:37 2011] Giving source the simple spatial ID 43 for pass 1, mean size = 16.25"
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src43.ximg exists
[Tue Sep 27 14:58:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src43.csv
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src43_1.ximg exists
[Tue Sep 27 14:58:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src43.csv
[Tue Sep 27 14:58:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Tue Sep 27 14:58:19 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Tue Sep 27 14:58:57 2011] Warning, spatial fit 43 centroid is now closest to src. 11
[Tue Sep 27 14:58:57 2011] Source 62 is offset by -6.193425 and -7.802414 pixels which is larger than
2 X fitted extent = 2.213844 x 2.213844, not incorporating fit results
[Tue Sep 27 14:58:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:57 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:57 2011] Source does appear to be extended
[Tue Sep 27 14:58:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 01:57:43 2011] XMMSAS src. selection expression = ellipse(25524.562000, 21436.674000, 974.796028, 974.796028, 0.000000, X, Y)
[Wed Sep 28 01:57:43 2011] Writing source region out to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src62_src.reg
[Wed Sep 28 01:57:43 2011] Extracting stamp from image fullrun_mos2_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (238, 191) - (350, 303)
[Wed Sep 28 01:57:43 2011] XMMSAS bgd. selection expression = annulus(25524.562000, 21436.674000, 1624.660047, 3249.320093, X, Y) && !ellipse(25309.907660, 23946.979000, 2208.223264, 2208.223264, 0.000000, X, Y) && !ellipse(24552.064240, 23860.383972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26215.445540, 20316.628600, 349.813610, 349.813610, 0.000000, X, Y) && !ellipse(26071.964000, 22224.696000, 410.666412, 410.666412, 0.000000, X, Y) && !ellipse(23242.357800, 23260.607600, 347.691210, 273.329608, 40.128000, X, Y) && !ellipse(26771.233307, 23101.794312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27043.076000, 24853.876000, 784.788823, 784.788823, 0.000000, X, Y) && !ellipse(27293.197400, 23329.865000, 371.203211, 371.203211, 0.000000, X, Y) && !ellipse(23103.122000, 23319.531600, 1292.688037, 1292.688037, 0.000000, X, Y) && !ellipse(25351.210000, 25089.122000, 1054.760030, 1054.760030, 0.000000, X, Y) && !ellipse(27454.330620, 20185.086400, 353.691210, 353.691210, 0.000000, X, Y) && !ellipse(23430.601105, 24486.100037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25892.161072, 25523.409363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27627.788840, 22220.912800, 424.148012, 424.148012, 0.000000, X, Y) && !ellipse(27698.050934, 23904.574280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28243.956818, 24124.731964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24467.082062, 21960.999908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27625.961578, 25341.696503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.942749, 17786.099091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26774.682000, 21222.462000, 1306.072038, 1306.072038, 0.000000, X, Y) && !ellipse(24278.836600, 20302.681400, 1181.360034, 281.816008, 346.536000, X, Y)
[Wed Sep 28 01:57:43 2011] Writing fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src62.gif
[Wed Sep 28 02:19:02 2011] Mean detx,y = (-808.01, 2182.82) 
[Wed Sep 28 02:19:04 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 02:19:21 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 02:19:21 2011] Setting source spectrum file to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Wed Sep 28 02:19:21 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Wed Sep 28 03:15:35 2011] Not generating rmf since there are only 96 counts
[Wed Sep 28 03:15:35 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:25:29 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:29 2011] Error reading totcts from fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Wed Sep 28 03:25:32 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:32 2011] Using photon index=1.80, rate=0.00189, arf fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src62.arf
[Wed Sep 28 03:25:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:32 2011] Updating source flux to 1.8e-14
[Wed Sep 28 03:29:46 2011] Flag b found in src. 62 procflags, skipping spectral fitting
[Wed Sep 28 03:29:46 2011] Flag c found in src. 62 procflags, skipping spectral fitting
[Wed Sep 28 03:29:46 2011] Source 62 has fewer than 100.000000 counts, skipping spectral fitting