[Mon Sep 26 22:30:13 2011] Detection parameters: Position = (301.4, 325.5) = 12 43 37.12 11 36 46.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 60.2 +/- 11.7 Background counts = 28.6 Rate = 0.001 +/- 0.0003 [Mon Sep 26 22:30:13 2011] Off-axis axis estimate = 1.98' [Tue Sep 27 05:52:31 2011] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting [Tue Sep 27 05:52:31 2011] Initial guess for spatial extent in simple fitting = 7.42" [Tue Sep 27 05:52:31 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.285 [Tue Sep 27 05:52:31 2011] Giving source the simple spatial ID 55 for pass 0, mean size = 7.42" [Tue Sep 27 07:51:22 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src55.ximg exists [Tue Sep 27 07:51:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src55.csv [Tue Sep 27 07:51:22 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src55_1.ximg exists [Tue Sep 27 07:51:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src55.csv [Tue Sep 27 07:51:22 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src55_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 27 07:51:23 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src55.ximg exists [Tue Sep 27 07:51:23 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists [Tue Sep 27 07:51:23 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly [Tue Sep 27 07:52:08 2011] Spatial fit model total counts = 331.000000, observed total counts = 331.000000 [Tue Sep 27 07:52:08 2011] Offset between fit and detection position for source 52 = 0.285071 pixels [Tue Sep 27 07:52:08 2011] 328.444700 total counts/ 303.140000 bgd. counts: snr = 1.453381 Spatial fit parameters: Offset between fit and detection position for source 52 = 0.285071 pixels Position = (301.2, 325.7) = 12 43 37.19 11 36 46.5 Extent = 2.1 (1.9-3.2)", rotation angle = 0 Source counts = 25.3 +/- 18.1 Background counts = 303.1 Rate = 0.0005 +/- 0.0004 Deleting source due to low Poisson probability