[Mon Sep 26 22:30:13 2011] Detection parameters:
  Position = (237.2, 157.2) = 12 43 56.10 11 24 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.0 +/- 10.7
  Background counts = 16.1
  Rate = 0.002 +/- 0.0004

[Mon Sep 26 22:30:13 2011] Off-axis axis estimate = 11.16'
[Tue Sep 27 05:52:31 2011] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 05:52:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 05:52:31 2011] Initial guess for spatial extent in simple fitting = 12.01"
[Tue Sep 27 05:52:31 2011] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.847
[Tue Sep 27 05:52:31 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 12.01"
[Tue Sep 27 07:51:21 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src33.ximg exists
[Tue Sep 27 07:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src33.csv
[Tue Sep 27 07:51:21 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Sep 27 07:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src33.csv
[Tue Sep 27 07:51:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:51:22 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Sep 27 07:51:22 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Sep 27 07:51:22 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Sep 27 07:52:08 2011] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 15.949938 pixels away
[Tue Sep 27 07:52:09 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:52:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:52:09 2011] Assessing source extent using major
[Tue Sep 27 07:52:09 2011] Source does appear to be extended
[Tue Sep 27 07:52:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:26:37 2011] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:26:37 2011] Initial guess for spatial extent in simple fitting = 12.01"
[Tue Sep 27 13:26:37 2011] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.847
[Tue Sep 27 13:26:37 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 12.01"
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src30.ximg exists
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Sep 27 14:58:19 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src30 appears to have run properly
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Sep 27 14:58:19 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Sep 27 14:58:57 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 15.949938 pixels away
[Tue Sep 27 14:58:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:57 2011] Assessing source extent using major
[Tue Sep 27 14:58:57 2011] Source does appear to be extended
[Tue Sep 27 14:58:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 01:57:43 2011] XMMSAS src. selection expression = ellipse(20591.266312, 13628.840942, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep 28 01:57:43 2011] Writing source region out to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src49_src.reg
[Wed Sep 28 01:57:43 2011] Extracting stamp from image fullrun_mos2_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (200, 120) - (275, 195)
[Wed Sep 28 01:57:43 2011] XMMSAS bgd. selection expression = annulus(20591.266312, 13628.840942, 1087.500000, 2175.000000, X, Y) && !ellipse(23072.227905, 16327.204300, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 01:57:43 2011] Writing fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src49.gif
[Wed Sep 28 02:15:31 2011] Mean detx,y = (-8486.25, 7650.65) 
[Wed Sep 28 02:15:35 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 02:15:58 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 02:15:59 2011] Setting source spectrum file to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Sep 28 02:15:59 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Wed Sep 28 03:15:06 2011] Not generating rmf since there are only 53 counts
[Wed Sep 28 03:15:06 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:25:29 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:29 2011] Error reading totcts from fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Sep 28 03:25:32 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:32 2011] Using photon index=1.80, rate=0.0021, arf fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src49.arf
[Wed Sep 28 03:25:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:32 2011] Updating source flux to 3.9e-14
[Wed Sep 28 03:29:46 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting