[Mon Sep 26 22:30:12 2011] Detection parameters:
  Position = (306.1, 293.1) = 12 43 35.74 11 34 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.8 +/- 22.9
  Background counts = 43.5
  Rate = 0.005 +/- 0.0005

[Mon Sep 26 22:30:13 2011] Off-axis axis estimate = 0.67'
[Tue Sep 27 05:52:31 2011] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 05:52:31 2011] Initial guess for spatial extent in simple fitting = 6.76"
[Tue Sep 27 05:52:31 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.947
[Tue Sep 27 05:52:31 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 6.76"
[Tue Sep 27 07:51:21 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src14.ximg exists
[Tue Sep 27 07:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src14.csv
[Tue Sep 27 07:51:21 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue Sep 27 07:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src14.csv
[Tue Sep 27 07:51:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:51:22 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue Sep 27 07:51:22 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Sep 27 07:51:22 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Tue Sep 27 07:52:08 2011] Spatial fit model total counts = 1502.640000, observed total counts = 1504.000000
[Tue Sep 27 07:52:08 2011] Offset between fit and detection position for source 22 = 0.667277 pixels
[Tue Sep 27 07:52:08 2011] 1384.680800 total counts/ 1313.240000 bgd. counts: snr = 1.971398
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.667277 pixels
  Position = (306.0, 293.8) = 12 43 35.77 11 34 27.9
  Extent = 4.6 (3.1-5.9)", rotation angle = 0
  Source counts = 71.4 +/- 37.2
  Background counts = 1313.2
  Rate = 0.001 +/- 0.0007
[Tue Sep 27 07:52:08 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:52:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:52:08 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:52:08 2011] Source does appear to be extended
[Tue Sep 27 07:52:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:26:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:26:37 2011] Initial guess for spatial extent in simple fitting = 4.60"
[Tue Sep 27 13:26:37 2011] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.237
[Tue Sep 27 13:26:37 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 4.60"
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src13.ximg exists
[Tue Sep 27 14:58:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src13.csv
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Sep 27 14:58:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src13.csv
[Tue Sep 27 14:58:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Sep 27 14:58:19 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Sep 27 14:58:57 2011] Spatial fit model total counts = 1507.720000, observed total counts = 1504.000000
[Tue Sep 27 14:58:57 2011] Offset between fit and detection position for source 22 = 0.130494 pixels
[Tue Sep 27 14:58:57 2011] 1334.708300 total counts/ 1253.450000 bgd. counts: snr = 2.295167
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.130494 pixels
  Position = (306.1, 293.8) = 12 43 35.73 11 34 27.9
  Extent = 5.0 (3.6-6.3)", rotation angle = 0
  Source counts = 81.3 +/- 36.5
  Background counts = 1253.5
  Rate = 0.002 +/- 0.0007
[Tue Sep 27 14:58:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:57 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:57 2011] Source does appear to be extended
[Tue Sep 27 14:58:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 01:57:42 2011] XMMSAS src. selection expression = ellipse(26582.932840, 25513.920720, 298.772409, 298.772409, 0.000000, X, Y)
[Wed Sep 28 01:57:42 2011] Writing source region out to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src22_src.reg
[Wed Sep 28 01:57:42 2011] Extracting stamp from image fullrun_mos2_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (289, 277) - (323, 311)
[Wed Sep 28 01:57:42 2011] XMMSAS bgd. selection expression = annulus(26582.932840, 25513.920720, 497.954014, 995.908029, X, Y) && !ellipse(25309.907660, 23946.979000, 2208.223264, 2208.223264, 0.000000, X, Y) && !ellipse(27043.076000, 24853.876000, 784.788823, 784.788823, 0.000000, X, Y) && !ellipse(25351.210000, 25089.122000, 1054.760030, 1054.760030, 0.000000, X, Y) && !ellipse(25892.161072, 25523.409363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27483.257800, 26038.575200, 618.388818, 618.388818, 0.000000, X, Y) && !ellipse(27698.050934, 23904.574280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28243.956818, 24124.731964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27625.961578, 25341.696503, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 01:57:42 2011] Writing fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src22.gif
[Wed Sep 28 02:08:56 2011] Mean detx,y = (1629.20, -984.08) 
[Wed Sep 28 02:08:58 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 02:09:09 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 02:09:09 2011] Setting source spectrum file to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Sep 28 02:09:09 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Sep 28 02:54:30 2011] Not generating rmf since there are only 81 counts
[Wed Sep 28 02:54:30 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:25:28 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:28 2011] Error reading totcts from fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Sep 28 03:25:31 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:31 2011] Using photon index=1.80, rate=0.00158, arf fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src22.arf
[Wed Sep 28 03:25:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:31 2011] Updating source flux to 2.1e-14
[Wed Sep 28 03:29:46 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting