[Mon Sep 26 22:30:12 2011] Detection parameters:
  Position = (291.2, 276.0) = 12 43 40.14 11 33 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14612.7 +/- 142.1
  Background counts = 50.3
  Rate = 0.3 +/- 0.003

[Mon Sep 26 22:30:13 2011] Off-axis axis estimate = 1.71'
[Tue Sep 27 05:52:31 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 05:52:31 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Sep 27 05:52:31 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Tue Sep 27 05:52:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Sep 27 07:51:21 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Sep 27 07:51:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src1.csv
[Tue Sep 27 07:51:21 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Sep 27 07:51:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src1.csv
[Tue Sep 27 07:51:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:51:22 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 07:51:22 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 07:51:22 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 07:52:08 2011] Spatial fit model total counts = 20129.400000, observed total counts = 20126.000000
[Tue Sep 27 07:52:08 2011] Offset between fit and detection position for source 1 = 0.295322 pixels
[Tue Sep 27 07:52:08 2011] 20295.270000 total counts/ 7958.470000 bgd. counts: snr = 138.289031
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.295322 pixels
  Position = (291.4, 275.8) = 12 43 40.07 11 33 9.6
  Extent = 9.0 (8.8-9.1)", rotation angle = 0
  Source counts = 12336.8 +/- 142.5
  Background counts = 7958.5
  Rate = 0.2 +/- 0.003
[Tue Sep 27 07:52:08 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:52:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:52:08 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:52:08 2011] Source does appear to be extended
[Tue Sep 27 07:52:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 13:26:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 13:26:37 2011] Initial guess for spatial extent in simple fitting = 8.95"
[Tue Sep 27 13:26:37 2011] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.917
[Tue Sep 27 13:26:37 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.95"
[Tue Sep 27 14:58:18 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Sep 27 14:58:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src1.csv
[Tue Sep 27 14:58:18 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Sep 27 14:58:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src1.csv
[Tue Sep 27 14:58:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 14:58:19 2011] fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 14:58:19 2011] Fit fullrun_mos2_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 14:58:57 2011] Spatial fit model total counts = 20971.200000, observed total counts = 20961.000000
[Tue Sep 27 14:58:57 2011] Offset between fit and detection position for source 1 = 0.043395 pixels
[Tue Sep 27 14:58:57 2011] 21094.110000 total counts/ 8284.510000 bgd. counts: snr = 140.735012
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.043395 pixels
  Position = (291.5, 275.8) = 12 43 40.06 11 33 9.6
  Extent = 9.2 (9.1-9.3)", rotation angle = 0
  Source counts = 12809.6 +/- 145.2
  Background counts = 8284.5
  Rate = 0.2 +/- 0.003
[Tue Sep 27 14:58:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:57 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:57 2011] Source does appear to be extended
[Tue Sep 27 14:58:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 01:57:42 2011] Counts = 12809.600000, rescaling region sizes by 3.000000
[Wed Sep 28 01:57:42 2011] XMMSAS src. selection expression = ellipse(25309.907660, 23946.979000, 1656.167448, 1656.167448, 0.000000, X, Y)
[Wed Sep 28 01:57:42 2011] Writing source region out to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep 28 01:57:42 2011] Extracting stamp from image fullrun_mos2_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (196, 181) - (387, 371)
[Wed Sep 28 01:57:42 2011] XMMSAS bgd. selection expression = annulus(25309.907660, 23946.979000, 8280.837238, 16561.674477, X, Y) && !ellipse(16922.762000, 24559.866000, 619.060818, 619.060818, 0.000000, X, Y) && !ellipse(24552.064240, 23860.383972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17356.321533, 26651.464935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32706.053000, 30933.279800, 410.116812, 410.116812, 0.000000, X, Y) && !ellipse(26215.445540, 20316.628600, 349.813610, 349.813610, 0.000000, X, Y) && !ellipse(26071.964000, 22224.696000, 410.666412, 410.666412, 0.000000, X, Y) && !ellipse(37703.031880, 27504.695600, 456.497613, 456.497613, 0.000000, X, Y) && !ellipse(23242.357800, 23260.607600, 347.691210, 273.329608, 40.128000, X, Y) && !ellipse(18918.603692, 29726.611600, 394.449611, 394.449611, 0.000000, X, Y) && !ellipse(36928.603460, 27267.477800, 371.368811, 371.368811, 0.000000, X, Y) && !ellipse(26771.233307, 23101.794312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26582.932840, 25513.920720, 398.363211, 398.363211, 0.000000, X, Y) && !ellipse(27043.076000, 24853.876000, 784.788823, 784.788823, 0.000000, X, Y) && !ellipse(24494.592180, 25725.238600, 459.784813, 459.784813, 0.000000, X, Y) && !ellipse(27293.197400, 23329.865000, 371.203211, 371.203211, 0.000000, X, Y) && !ellipse(29181.893707, 15992.314835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23103.122000, 23319.531600, 1292.688037, 1292.688037, 0.000000, X, Y) && !ellipse(25351.210000, 25089.122000, 1054.760030, 1054.760030, 0.000000, X, Y) && !ellipse(27454.330620, 20185.086400, 353.691210, 353.691210, 0.000000, X, Y) && !ellipse(23430.601105, 24486.100037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14573.803040, 25971.079163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25892.161072, 25523.409363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27483.257800, 26038.575200, 618.388818, 618.388818, 0.000000, X, Y) && !ellipse(29511.878200, 21745.860000, 349.768810, 349.768810, 0.000000, X, Y) && !ellipse(23072.227905, 16327.204300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17648.301743, 32990.846527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27627.788840, 22220.912800, 424.148012, 424.148012, 0.000000, X, Y) && !ellipse(27631.050400, 31879.461400, 389.855211, 389.855211, 0.000000, X, Y) && !ellipse(20591.266312, 13628.840942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27698.050934, 23904.574280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11344.031586, 31105.382782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28243.956818, 24124.731964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24596.671387, 33260.639984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24467.082062, 21960.999908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27625.961578, 25341.696503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.942749, 17786.099091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38697.290375, 19442.988708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25524.562000, 21436.674000, 1299.728037, 1299.728037, 0.000000, X, Y) && !ellipse(26774.682000, 21222.462000, 1306.072038, 1306.072038, 0.000000, X, Y) && !ellipse(10411.616493, 30852.438141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24278.836600, 20302.681400, 1181.360034, 281.816008, 346.536000, X, Y) && !ellipse(37815.818000, 26057.728000, 1806.728052, 1806.728052, 0.000000, X, Y)
[Wed Sep 28 01:57:42 2011] Writing fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src1.gif
[Wed Sep 28 01:57:54 2011] Mean detx,y = (-125.64, -59.40) 
[Wed Sep 28 01:57:57 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 02:04:30 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 02:04:30 2011] Setting source spectrum file to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 02:04:30 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep 28 03:25:27 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:27 2011] Error reading totcts from fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 03:25:30 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:30 2011] Using photon index=1.80, rate=0.249, arf fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 03:25:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:30 2011] Updating source flux to 2.2e-12
[Wed Sep 28 03:32:09 2011] Reading fit data from xmm0021540201/analysis//spectral/fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Sep 28 03:32:09 2011] Spectral fit parameter nH value = 9.79625e+21
[Wed Sep 28 03:32:09 2011] Spectral fit parameter PhoIndex value = 7.8078
[Wed Sep 28 03:32:09 2011] Failed to get F(0.3-8.0) from xmm0021540201/analysis//spectral/fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 03:32:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:32:09 2011] Using Nh = 9.8e+21, photon index=7.81, rate=0.249, arf fullrun_mos2_xmm0021540201_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 03:32:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:32:09 2011] Updating source flux to 1.3e-12