[Mon Sep 26 22:29:44 2011] Detection parameters:
  Position = (273.3, 294.0) = 12 43 45.45 11 34 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.4 +/- 13.9
  Background counts = 41.5
  Rate = 0.001 +/- 0.0003

[Mon Sep 26 22:29:45 2011] Off-axis axis estimate = 1.85'
[Tue Sep 27 02:40:54 2011] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:40:54 2011] Initial guess for spatial extent in simple fitting = 7.35"
[Tue Sep 27 02:40:54 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.833
[Tue Sep 27 02:40:54 2011] Giving source the simple spatial ID 68 for pass 0, mean size = 7.35"
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src68.ximg exists
[Tue Sep 27 05:52:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src68.csv
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src68_1.ximg exists
[Tue Sep 27 05:52:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src68.csv
[Tue Sep 27 05:52:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:52:31 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Tue Sep 27 05:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Tue Sep 27 05:52:31 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Tue Sep 27 05:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Tue Sep 27 05:52:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:51:57 2011] Source 51 is offset by -6.484219 and 5.716274 pixels which is larger than
2 X fitted extent = 0.845393 x 0.845393, not incorporating fit results
[Tue Sep 27 07:51:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:57 2011] Assessing source extent using major
[Tue Sep 27 07:51:57 2011] Source does appear to be extended
[Tue Sep 27 07:51:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 11:35:14 2011] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:35:14 2011] Initial guess for spatial extent in simple fitting = 7.35"
[Tue Sep 27 11:35:14 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.833
[Tue Sep 27 11:35:14 2011] Giving source the simple spatial ID 54 for pass 1, mean size = 7.35"
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src54.ximg exists
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src54_1.ximg exists
[Tue Sep 27 13:26:37 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src54 appears to have run properly
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Tue Sep 27 13:26:37 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Tue Sep 27 14:58:47 2011] Source 51 is offset by 7.042080 and -6.236461 pixels which is larger than
2 X fitted extent = 5.082299 x 6.763127, not incorporating fit results
[Tue Sep 27 14:58:47 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:47 2011] Assessing source extent using major
[Tue Sep 27 14:58:47 2011] Source does appear to be extended
[Tue Sep 27 14:58:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:02:13 2011] XMMSAS src. selection expression = ellipse(23726.766968, 25525.421875, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep 28 00:02:13 2011] Writing source region out to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src51_src.reg
[Wed Sep 28 00:02:13 2011] Extracting stamp from image fullrun_mos1_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (236, 256) - (311, 331)
[Wed Sep 28 00:02:13 2011] XMMSAS bgd. selection expression = annulus(23726.766968, 25525.421875, 1087.500000, 2175.000000, X, Y) && !ellipse(25287.417120, 23930.793600, 2546.448073, 2546.448073, 0.000000, X, Y) && !ellipse(23236.450600, 23245.795400, 418.301612, 418.301612, 0.000000, X, Y) && !ellipse(26843.656000, 23249.239200, 1221.536035, 1221.536035, 0.000000, X, Y) && !ellipse(24137.236000, 24029.902000, 659.467219, 659.467219, 0.000000, X, Y) && !ellipse(26558.188446, 25434.975647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24105.815400, 22581.326000, 1319.128038, 1319.128038, 0.000000, X, Y) && !ellipse(25836.216949, 25525.336914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23520.046387, 24402.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22776.956787, 23860.790192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21852.069600, 24886.172000, 337.830410, 337.830410, 0.000000, X, Y) && !ellipse(24216.455261, 26716.855652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22447.919006, 22972.850159, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 00:02:13 2011] Writing fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src51.gif
[Wed Sep 28 00:22:50 2011] Mean detx,y = (-1825.40, 740.00) 
[Wed Sep 28 00:22:51 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 00:23:00 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 00:23:01 2011] Setting source spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Wed Sep 28 00:23:01 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Wed Sep 28 01:57:32 2011] Not generating rmf since there are only 54 counts
[Wed Sep 28 01:57:32 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:25:23 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:23 2011] Error reading totcts from fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Wed Sep 28 03:25:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:27 2011] Using photon index=1.80, rate=0.00112, arf fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src51.arf
[Wed Sep 28 03:25:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:27 2011] Updating source flux to 1.1e-14
[Wed Sep 28 03:25:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting