[Mon Sep 26 22:29:44 2011] Detection parameters:
  Position = (309.0, 306.1) = 12 43 34.88 11 35 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.4 +/- 12.6
  Background counts = 29.6
  Rate = 0.001 +/- 0.0003

[Mon Sep 26 22:29:45 2011] Off-axis axis estimate = 0.94'
[Tue Sep 27 02:40:54 2011] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:40:54 2011] Initial guess for spatial extent in simple fitting = 6.90"
[Tue Sep 27 02:40:54 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Tue Sep 27 02:40:54 2011] Giving source the simple spatial ID 65 for pass 0, mean size = 6.90"
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src65.ximg exists
[Tue Sep 27 05:52:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src65.csv
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src65_1.ximg exists
[Tue Sep 27 05:52:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src65.csv
[Tue Sep 27 05:52:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:52:31 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Tue Sep 27 05:52:31 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Tue Sep 27 05:52:31 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Tue Sep 27 07:51:57 2011] Source 48 is offset by -5.689429 and 5.421328 pixels which is larger than
2 X fitted extent = 3.227329 x 3.227329, not incorporating fit results
[Tue Sep 27 07:51:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:57 2011] Assessing source extent using major
[Tue Sep 27 07:51:57 2011] Source does appear to be extended
[Tue Sep 27 07:51:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 11:35:14 2011] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:35:14 2011] Initial guess for spatial extent in simple fitting = 6.90"
[Tue Sep 27 11:35:14 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Tue Sep 27 11:35:14 2011] Giving source the simple spatial ID 51 for pass 1, mean size = 6.90"
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src51.ximg exists
[Tue Sep 27 13:26:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src51.csv
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src51_1.ximg exists
[Tue Sep 27 13:26:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src51.csv
[Tue Sep 27 13:26:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Tue Sep 27 13:26:37 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Tue Sep 27 14:58:47 2011] Source 48 is offset by -3.249452 and 6.751650 pixels which is larger than
2 X fitted extent = 6.218805 x 0.777347, not incorporating fit results
[Tue Sep 27 14:58:47 2011] Source 48 is offset by -5.559843 and 5.421328 pixels which is larger than
2 X fitted extent = 3.275660 x 3.275660, not incorporating fit results
[Tue Sep 27 14:58:47 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:47 2011] Assessing source extent using major
[Tue Sep 27 14:58:47 2011] Source does appear to be extended
[Tue Sep 27 14:58:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:02:13 2011] XMMSAS src. selection expression = ellipse(26831.831696, 26580.137573, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep 28 00:02:13 2011] Writing source region out to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src48_src.reg
[Wed Sep 28 00:02:13 2011] Extracting stamp from image fullrun_mos1_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (271, 269) - (346, 344)
[Wed Sep 28 00:02:13 2011] XMMSAS bgd. selection expression = annulus(26831.831696, 26580.137573, 1087.500000, 2175.000000, X, Y) && !ellipse(25287.417120, 23930.793600, 2546.448073, 2546.448073, 0.000000, X, Y) && !ellipse(26843.656000, 23249.239200, 1221.536035, 1221.536035, 0.000000, X, Y) && !ellipse(24137.236000, 24029.902000, 659.467219, 659.467219, 0.000000, X, Y) && !ellipse(26928.876000, 24872.858000, 748.144822, 748.144822, 0.000000, X, Y) && !ellipse(26907.096466, 24226.411621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.188446, 25434.975647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.216949, 25525.336914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27396.791400, 26049.750200, 693.516820, 693.516820, 0.000000, X, Y) && !ellipse(27476.422363, 25348.565063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.578705, 23718.467346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27905.169769, 24558.967316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24216.455261, 26716.855652, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 00:02:13 2011] Writing fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src48.gif
[Wed Sep 28 00:22:23 2011] Mean detx,y = (-1535.88, -2435.40) 
[Wed Sep 28 00:22:24 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 00:22:33 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 00:22:33 2011] Setting source spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Wed Sep 28 00:22:33 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Wed Sep 28 01:57:25 2011] Not generating rmf since there are only 53 counts
[Wed Sep 28 01:57:26 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:25:23 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:23 2011] Error reading totcts from fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Wed Sep 28 03:25:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:27 2011] Using photon index=1.80, rate=0.00117, arf fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src48.arf
[Wed Sep 28 03:25:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:27 2011] Updating source flux to 1.2e-14
[Wed Sep 28 03:25:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting