[Mon Sep 26 22:29:43 2011] Detection parameters:
  Position = (302.9, 236.7) = 12 43 36.68 11 30 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 672.1 +/- 46.0
  Background counts = 29.1
  Rate = 0.02 +/- 0.001

[Mon Sep 26 22:29:45 2011] Off-axis axis estimate = 4.49'
[Tue Sep 27 02:40:54 2011] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:40:54 2011] Initial guess for spatial extent in simple fitting = 8.67"
[Tue Sep 27 02:40:54 2011] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.684
[Tue Sep 27 02:40:54 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 8.67"
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src3.csv
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src3.csv
[Tue Sep 27 05:52:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep 27 05:52:30 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Sep 27 07:51:57 2011] Spatial fit model total counts = 868.175000, observed total counts = 869.000000
[Tue Sep 27 07:51:57 2011] Offset between fit and detection position for source 4 = 2.484071 pixels
[Tue Sep 27 07:51:57 2011] 876.851000 total counts/ 481.594000 bgd. counts: snr = 18.011050
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.484071 pixels
  Position = (302.9, 234.2) = 12 43 36.67 11 30 8.7
  Extent = 6.9 (6.3-7.7)", rotation angle = 0
  Source counts = 395.3 +/- 29.6
  Background counts = 481.6
  Rate = 0.008 +/- 0.0006
[Tue Sep 27 07:51:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:57 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:51:57 2011] Source does appear to be extended
[Tue Sep 27 07:51:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 11:35:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:35:14 2011] Initial guess for spatial extent in simple fitting = 6.94"
[Tue Sep 27 11:35:14 2011] source mask rpix=1.6, npix_max = 17, mask sum = 6, frac = 0.342
[Tue Sep 27 11:35:14 2011] Skipping simple spatial due to low active detector fraction
[Tue Sep 27 14:58:47 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:47 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:47 2011] Source does appear to be extended
[Tue Sep 27 14:58:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:02:11 2011] XMMSAS src. selection expression = ellipse(26305.250800, 20329.554000, 416.483412, 416.483412, 0.000000, X, Y)
[Wed Sep 28 00:02:11 2011] Writing source region out to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src4_src.reg
[Wed Sep 28 00:02:11 2011] Extracting stamp from image fullrun_mos1_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (279, 210) - (327, 258)
[Wed Sep 28 00:02:11 2011] XMMSAS bgd. selection expression = annulus(26305.250800, 20329.554000, 694.139020, 1388.278040, X, Y) && !ellipse(25287.417120, 23930.793600, 2546.448073, 2546.448073, 0.000000, X, Y) && !ellipse(27441.354600, 20183.448200, 338.818410, 338.818410, 0.000000, X, Y) && !ellipse(24105.815400, 22581.326000, 1319.128038, 1319.128038, 0.000000, X, Y) && !ellipse(26639.992554, 22365.445831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27732.090000, 22202.942000, 1109.248032, 1109.248032, 0.000000, X, Y) && !ellipse(26494.257996, 21811.561584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25260.497742, 21762.710373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24209.451294, 21904.911087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24094.292000, 20211.110000, 1409.280041, 1409.280041, 0.000000, X, Y)
[Wed Sep 28 00:02:11 2011] Writing fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src4.gif
[Wed Sep 28 00:10:14 2011] Mean detx,y = (3880.41, 484.06) 
[Wed Sep 28 00:10:15 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 00:10:25 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 00:10:25 2011] Setting source spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Sep 28 00:10:25 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Sep 28 03:25:21 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:21 2011] Error reading totcts from fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Sep 28 03:25:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:24 2011] Using photon index=1.80, rate=0.0077, arf fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src4.arf
[Wed Sep 28 03:25:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:24 2011] Updating source flux to 9.4e-14