[Mon Sep 26 22:29:44 2011] Detection parameters:
  Position = (280.2, 259.1) = 12 43 43.41 11 31 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.7 +/- 21.3
  Background counts = 41.4
  Rate = 0.004 +/- 0.0004

[Mon Sep 26 22:29:45 2011] Off-axis axis estimate = 3.14'
[Tue Sep 27 02:40:54 2011] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:40:54 2011] Initial guess for spatial extent in simple fitting = 8.00"
[Tue Sep 27 02:40:54 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.914
[Tue Sep 27 02:40:54 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 8.00"
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src22.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src22.csv
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src22.csv
[Tue Sep 27 05:52:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue Sep 27 05:52:30 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Tue Sep 27 07:51:57 2011] Source 31 is offset by 4.315667 and 1.569259 pixels which is larger than
2 X fitted extent = 0.919536 x 0.919536, not incorporating fit results
[Tue Sep 27 07:51:57 2011] Spatial fit model total counts = 1032.660000, observed total counts = 1031.000000
[Tue Sep 27 07:51:57 2011] Offset between fit and detection position for source 31 = 2.714607 pixels
[Tue Sep 27 07:51:57 2011] Warning, changing simple spatial fit ID from 22 to 49
[Tue Sep 27 07:51:57 2011] 989.661000 total counts/ 724.015000 bgd. counts: snr = 9.872554
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 2.714607 pixels
  Position = (277.6, 260.1) = 12 43 44.16 11 32 1.3
  Extent = 16.5 (16.4-33.0)", rotation angle = 0
  Source counts = 265.6 +/- 31.5
  Background counts = 724.0
  Rate = 0.005 +/- 0.0006
[Tue Sep 27 07:51:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:57 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:51:57 2011] Source does appear to be extended
[Tue Sep 27 07:51:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:51:57 2011] Source is confused with source 28
[Tue Sep 27 07:51:57 2011] Source is confused with source 64
[Tue Sep 27 11:35:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:35:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 11:35:14 2011] Initial guess for spatial extent in simple fitting = 16.49"
[Tue Sep 27 11:35:14 2011] source mask rpix=3.8, npix_max = 73, mask sum = 72, frac = 0.978
[Tue Sep 27 11:35:14 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 16.49"
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src21.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src21.csv
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src21.csv
[Tue Sep 27 13:26:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Sep 27 13:26:37 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Sep 27 14:58:47 2011] Warning, spatial fit 21 centroid is now closest to src. 64
[Tue Sep 27 14:58:47 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:47 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:47 2011] Source does appear to be extended
[Tue Sep 27 14:58:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:02:12 2011] XMMSAS src. selection expression = ellipse(24105.815400, 22581.326000, 989.346028, 989.346028, 0.000000, X, Y)
[Wed Sep 28 00:02:12 2011] Writing source region out to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src31_src.reg
[Wed Sep 28 00:02:12 2011] Extracting stamp from image fullrun_mos1_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (221, 203) - (334, 317)
[Wed Sep 28 00:02:12 2011] XMMSAS bgd. selection expression = annulus(24105.815400, 22581.326000, 1648.910047, 3297.820095, X, Y) && !ellipse(25287.417120, 23930.793600, 2546.448073, 2546.448073, 0.000000, X, Y) && !ellipse(26305.250800, 20329.554000, 555.311216, 555.311216, 0.000000, X, Y) && !ellipse(26089.922000, 22216.722000, 283.023208, 283.023208, 0.000000, X, Y) && !ellipse(23236.450600, 23245.795400, 418.301612, 418.301612, 0.000000, X, Y) && !ellipse(26843.656000, 23249.239200, 1221.536035, 1221.536035, 0.000000, X, Y) && !ellipse(24137.236000, 24029.902000, 659.467219, 659.467219, 0.000000, X, Y) && !ellipse(26928.876000, 24872.858000, 748.144822, 748.144822, 0.000000, X, Y) && !ellipse(26907.096466, 24226.411621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.188446, 25434.975647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27441.354600, 20183.448200, 338.818410, 338.818410, 0.000000, X, Y) && !ellipse(25836.216949, 25525.336914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26639.992554, 22365.445831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23520.046387, 24402.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27732.090000, 22202.942000, 1109.248032, 1109.248032, 0.000000, X, Y) && !ellipse(27396.791400, 26049.750200, 693.516820, 693.516820, 0.000000, X, Y) && !ellipse(27596.933000, 22224.265400, 400.189612, 400.189612, 0.000000, X, Y) && !ellipse(26494.257996, 21811.561584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27476.422363, 25348.565063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25260.497742, 21762.710373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.578705, 23718.467346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24209.451294, 21904.911087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22776.956787, 23860.790192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24094.292000, 20211.110000, 1409.280041, 1409.280041, 0.000000, X, Y) && !ellipse(21852.069600, 24886.172000, 337.830410, 337.830410, 0.000000, X, Y) && !ellipse(27905.169769, 24558.967316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26831.831696, 26580.137573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23726.766968, 25525.421875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24216.455261, 26716.855652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22447.919006, 22972.850159, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 00:02:12 2011] Writing fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src31.gif
[Wed Sep 28 00:15:35 2011] Mean detx,y = (796.90, 1421.29) 
[Wed Sep 28 00:15:36 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 00:15:46 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 00:15:46 2011] Setting source spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Sep 28 00:15:46 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed Sep 28 03:25:21 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:21 2011] Error reading totcts from fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Sep 28 03:25:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:24 2011] Using photon index=1.80, rate=0.00518, arf fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src31.arf
[Wed Sep 28 03:25:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:24 2011] Updating source flux to 4.7e-14
[Wed Sep 28 03:25:35 2011] Flag b found in src. 31 procflags, skipping spectral fitting
[Wed Sep 28 03:25:35 2011] Flag c found in src. 31 procflags, skipping spectral fitting