[Mon Sep 26 22:29:44 2011] Detection parameters:
  Position = (274.3, 267.9) = 12 43 45.14 11 32 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 366.8 +/- 27.2
  Background counts = 43.7
  Rate = 0.007 +/- 0.0005

[Mon Sep 26 22:29:45 2011] Off-axis axis estimate = 2.82'
[Tue Sep 27 02:40:54 2011] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:40:54 2011] Initial guess for spatial extent in simple fitting = 7.84"
[Tue Sep 27 02:40:54 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.943
[Tue Sep 27 02:40:54 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 7.84"
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src10.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src10.csv
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src10.csv
[Tue Sep 27 05:52:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Sep 27 05:52:30 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Sep 27 07:51:57 2011] Warning, spatial fit 10 centroid is now closest to src. 25
[Tue Sep 27 07:51:57 2011] Source 28 is offset by 6.828363 and -0.782544 pixels which is larger than
2 X fitted extent = 2.082932 x 1.641995, not incorporating fit results
[Tue Sep 27 07:51:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:57 2011] Assessing source extent using major
[Tue Sep 27 07:51:57 2011] Source does appear to be extended
[Tue Sep 27 07:51:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:51:57 2011] Source is confused with source 25
[Tue Sep 27 11:35:14 2011] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:35:14 2011] Initial guess for spatial extent in simple fitting = 7.84"
[Tue Sep 27 11:35:14 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.943
[Tue Sep 27 11:35:14 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 7.84"
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src9.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src9.csv
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src9.csv
[Tue Sep 27 13:26:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Sep 27 13:26:37 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Sep 27 14:58:47 2011] Spatial fit model total counts = 2240.930000, observed total counts = 2240.000000
[Tue Sep 27 14:58:47 2011] Offset between fit and detection position for source 28 = 9.372340 pixels
[Tue Sep 27 14:58:47 2011] 2191.956000 total counts/ 1767.080000 bgd. counts: snr = 10.107275
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 9.372340 pixels
  Position = (281.2, 274.2) = 12 43 43.10 11 33 2.6
  Extent = 15.7 (15.6-15.7)", rotation angle = 0
  Source counts = 424.9 +/- 46.8
  Background counts = 1767.1
  Rate = 0.008 +/- 0.0009
[Tue Sep 27 14:58:47 2011] Spatial fit model total counts = 1447.880000, observed total counts = 1447.000000
[Tue Sep 27 14:58:47 2011] Offset between fit and detection position for source 28 = 4.099882 pixels
[Tue Sep 27 14:58:47 2011] Warning, changing simple spatial fit ID from 9 to 26
[Tue Sep 27 14:58:47 2011] 1475.301800 total counts/ 1386.730000 bgd. counts: snr = 2.378480
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 4.099882 pixels
  Position = (278.0, 276.8) = 12 43 44.05 11 33 13.7
  Extent = 8.2 (4.2-12.5)", rotation angle = 0
  Source counts = 88.6 +/- 38.4
  Background counts = 1386.7
  Rate = 0.002 +/- 0.0007
[Tue Sep 27 14:58:47 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:47 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:47 2011] Source does appear to be extended
[Tue Sep 27 14:58:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:02:11 2011] XMMSAS src. selection expression = ellipse(24137.236000, 24029.902000, 494.600414, 494.600414, 0.000000, X, Y)
[Wed Sep 28 00:02:11 2011] Writing source region out to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src28_src.reg
[Wed Sep 28 00:02:11 2011] Extracting stamp from image fullrun_mos1_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (250, 248) - (306, 305)
[Wed Sep 28 00:02:11 2011] XMMSAS bgd. selection expression = annulus(24137.236000, 24029.902000, 824.334024, 1648.668047, X, Y) && !ellipse(25287.417120, 23930.793600, 2546.448073, 2546.448073, 0.000000, X, Y) && !ellipse(23236.450600, 23245.795400, 418.301612, 418.301612, 0.000000, X, Y) && !ellipse(26843.656000, 23249.239200, 1221.536035, 1221.536035, 0.000000, X, Y) && !ellipse(26558.188446, 25434.975647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24105.815400, 22581.326000, 1319.128038, 1319.128038, 0.000000, X, Y) && !ellipse(25836.216949, 25525.336914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26639.992554, 22365.445831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23520.046387, 24402.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26494.257996, 21811.561584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25260.497742, 21762.710373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24209.451294, 21904.911087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22776.956787, 23860.790192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23726.766968, 25525.421875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22447.919006, 22972.850159, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 00:02:11 2011] Writing fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src28.gif
[Wed Sep 28 00:12:38 2011] Mean detx,y = (-314.28, 935.59) 
[Wed Sep 28 00:12:39 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 00:12:48 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 00:12:48 2011] Setting source spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Sep 28 00:12:48 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed Sep 28 01:18:57 2011] Not generating rmf since there are only 88 counts
[Wed Sep 28 01:18:57 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:25:21 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:21 2011] Error reading totcts from fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Sep 28 03:25:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:24 2011] Using photon index=1.80, rate=0.00173, arf fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src28.arf
[Wed Sep 28 03:25:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:24 2011] Updating source flux to 1.7e-14
[Wed Sep 28 03:25:35 2011] Flag b found in src. 28 procflags, skipping spectral fitting
[Wed Sep 28 03:25:35 2011] Flag c found in src. 28 procflags, skipping spectral fitting
[Wed Sep 28 03:25:35 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting