[Mon Sep 26 22:29:44 2011] Detection parameters:
  Position = (314.2, 261.9) = 12 43 33.34 11 32 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.7 +/- 36.4
  Background counts = 32.9
  Rate = 0.003 +/- 0.0009

[Mon Sep 26 22:29:45 2011] Off-axis axis estimate = 2.88'
[Tue Sep 27 02:40:54 2011] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:40:54 2011] Initial guess for spatial extent in simple fitting = 7.87"
[Tue Sep 27 02:40:54 2011] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.563
[Tue Sep 27 02:40:54 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 7.87"
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src29.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src29.csv
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src29.csv
[Tue Sep 27 05:52:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Sep 27 05:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue Sep 27 05:52:31 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Sep 27 05:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Tue Sep 27 05:52:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:51:57 2011] Warning, spatial fit 29 centroid is now closest to src. 30
[Tue Sep 27 07:51:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:57 2011] Assessing source extent using major
[Tue Sep 27 07:51:57 2011] Source does appear to be extended
[Tue Sep 27 07:51:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:51:57 2011] Source is confused with source 26
[Tue Sep 27 11:35:14 2011] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:35:14 2011] Initial guess for spatial extent in simple fitting = 7.87"
[Tue Sep 27 11:35:14 2011] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.563
[Tue Sep 27 11:35:14 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 7.87"
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src27.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src27.csv
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src27.csv
[Tue Sep 27 13:26:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Sep 27 13:26:37 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Tue Sep 27 14:58:47 2011] Spatial fit model total counts = 4132.260000, observed total counts = 4129.000000
[Tue Sep 27 14:58:47 2011] Offset between fit and detection position for source 27 = 7.002549 pixels
[Tue Sep 27 14:58:47 2011] Warning, changing simple spatial fit ID from 27 to 7
[Tue Sep 27 14:58:47 2011] 3955.870000 total counts/ 2934.760000 bgd. counts: snr = 18.848910
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 7.002549 pixels
  Position = (320.8, 259.7) = 12 43 31.38 11 31 59.5
  Extent = 30.5 (30.0-61.1)", rotation angle = 0
  Source counts = 1021.1 +/- 62.9
  Background counts = 2934.8
  Rate = 0.02 +/- 0.001
[Tue Sep 27 14:58:47 2011] Spatial fit model total counts = 1223.900000, observed total counts = 1219.000000
[Tue Sep 27 14:58:47 2011] Offset between fit and detection position for source 27 = 4.205799 pixels
[Tue Sep 27 14:58:47 2011] Warning, changing simple spatial fit ID from 7 to 27
[Tue Sep 27 14:58:47 2011] 1147.830000 total counts/ 970.483000 bgd. counts: snr = 5.692852
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 4.205799 pixels
  Position = (319.3, 255.8) = 12 43 31.82 11 31 42.4
  Extent = 13.9 (10.1-15.7)", rotation angle = 0
  Source counts = 177.3 +/- 33.9
  Background counts = 970.5
  Rate = 0.003 +/- 0.0007
[Tue Sep 27 14:58:47 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:47 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:47 2011] Source does appear to be extended
[Tue Sep 27 14:58:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:02:12 2011] XMMSAS src. selection expression = ellipse(27732.090000, 22202.942000, 831.936024, 831.936024, 0.000000, X, Y)
[Wed Sep 28 00:02:12 2011] Writing source region out to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src27_src.reg
[Wed Sep 28 00:02:12 2011] Extracting stamp from image fullrun_mos1_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (272, 208) - (367, 304)
[Wed Sep 28 00:02:12 2011] XMMSAS bgd. selection expression = annulus(27732.090000, 22202.942000, 1386.560040, 2773.120080, X, Y) && !ellipse(25287.417120, 23930.793600, 2546.448073, 2546.448073, 0.000000, X, Y) && !ellipse(26305.250800, 20329.554000, 555.311216, 555.311216, 0.000000, X, Y) && !ellipse(26089.922000, 22216.722000, 283.023208, 283.023208, 0.000000, X, Y) && !ellipse(26843.656000, 23249.239200, 1221.536035, 1221.536035, 0.000000, X, Y) && !ellipse(26928.876000, 24872.858000, 748.144822, 748.144822, 0.000000, X, Y) && !ellipse(26907.096466, 24226.411621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.188446, 25434.975647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27441.354600, 20183.448200, 338.818410, 338.818410, 0.000000, X, Y) && !ellipse(24105.815400, 22581.326000, 1319.128038, 1319.128038, 0.000000, X, Y) && !ellipse(25836.216949, 25525.336914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26639.992554, 22365.445831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29465.156128, 21889.612808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27596.933000, 22224.265400, 400.189612, 400.189612, 0.000000, X, Y) && !ellipse(26494.257996, 21811.561584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27476.422363, 25348.565063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29544.499023, 20531.984818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25260.497742, 21762.710373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.578705, 23718.467346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24209.451294, 21904.911087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24094.292000, 20211.110000, 1409.280041, 1409.280041, 0.000000, X, Y) && !ellipse(27905.169769, 24558.967316, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 00:02:12 2011] Writing fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src27.gif
[Wed Sep 28 00:16:53 2011] Mean detx,y = (2640.82, -1454.33) 
[Wed Sep 28 00:16:54 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 00:17:02 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 00:17:02 2011] Setting source spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Sep 28 00:17:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Sep 28 03:25:21 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:22 2011] Error reading totcts from fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Sep 28 03:25:25 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:25 2011] Using photon index=1.80, rate=0.00346, arf fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src27.arf
[Wed Sep 28 03:25:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:25 2011] Updating source flux to 3.4e-14
[Wed Sep 28 03:25:35 2011] Flag c found in src. 27 procflags, skipping spectral fitting