[Mon Sep 26 22:29:44 2011] Detection parameters:
  Position = (311.0, 283.9) = 12 43 34.27 11 33 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 280.7 +/- 23.8
  Background counts = 34.7
  Rate = 0.006 +/- 0.0005

[Mon Sep 26 22:29:45 2011] Off-axis axis estimate = 1.39'
[Tue Sep 27 02:40:54 2011] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:40:54 2011] Initial guess for spatial extent in simple fitting = 7.13"
[Tue Sep 27 02:40:54 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.875
[Tue Sep 27 02:40:54 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 7.13"
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src13.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src13.csv
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src13.csv
[Tue Sep 27 05:52:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Sep 27 05:52:30 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Sep 27 07:51:57 2011] Warning, spatial fit 13 centroid is now closest to src. 23
[Tue Sep 27 07:51:57 2011] Source 20 is offset by -0.587931 and -4.008284 pixels which is larger than
2 X fitted extent = 0.787490 x 0.787490, not incorporating fit results
[Tue Sep 27 07:51:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:57 2011] Assessing source extent using major
[Tue Sep 27 07:51:57 2011] Source does appear to be extended
[Tue Sep 27 07:51:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:51:57 2011] Source is confused with source 23
[Tue Sep 27 11:35:14 2011] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:35:14 2011] Initial guess for spatial extent in simple fitting = 7.13"
[Tue Sep 27 11:35:14 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.875
[Tue Sep 27 11:35:14 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 7.13"
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src12.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src12.csv
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src12.csv
[Tue Sep 27 13:26:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Sep 27 13:26:37 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Sep 27 14:58:47 2011] Warning, spatial fit 12 centroid is now closest to src. 23
[Tue Sep 27 14:58:47 2011] Spatial fit model total counts = 901.895000, observed total counts = 900.000000
[Tue Sep 27 14:58:47 2011] Offset between fit and detection position for source 20 = 2.726076 pixels
[Tue Sep 27 14:58:47 2011] Warning, changing simple spatial fit ID from 12 to 35
[Tue Sep 27 14:58:47 2011] 856.165700 total counts/ 756.985000 bgd. counts: snr = 3.604820
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.726076 pixels
  Position = (310.1, 286.5) = 12 43 34.55 11 33 55.9
  Extent = 9.4 (6.7-14.2)", rotation angle = 0
  Source counts = 99.2 +/- 29.3
  Background counts = 757.0
  Rate = 0.002 +/- 0.0006
[Tue Sep 27 14:58:47 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:47 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:47 2011] Source does appear to be extended
[Tue Sep 27 14:58:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:02:11 2011] XMMSAS src. selection expression = ellipse(26928.876000, 24872.858000, 561.108616, 561.108616, 0.000000, X, Y)
[Wed Sep 28 00:02:11 2011] Writing source region out to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src20_src.reg
[Wed Sep 28 00:02:11 2011] Extracting stamp from image fullrun_mos1_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (278, 254) - (342, 319)
[Wed Sep 28 00:02:11 2011] XMMSAS bgd. selection expression = annulus(26928.876000, 24872.858000, 935.181027, 1870.362054, X, Y) && !ellipse(25287.417120, 23930.793600, 2546.448073, 2546.448073, 0.000000, X, Y) && !ellipse(26843.656000, 23249.239200, 1221.536035, 1221.536035, 0.000000, X, Y) && !ellipse(26907.096466, 24226.411621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.188446, 25434.975647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24105.815400, 22581.326000, 1319.128038, 1319.128038, 0.000000, X, Y) && !ellipse(25836.216949, 25525.336914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26639.992554, 22365.445831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27732.090000, 22202.942000, 1109.248032, 1109.248032, 0.000000, X, Y) && !ellipse(27396.791400, 26049.750200, 693.516820, 693.516820, 0.000000, X, Y) && !ellipse(27476.422363, 25348.565063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.578705, 23718.467346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27905.169769, 24558.967316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26831.831696, 26580.137573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24216.455261, 26716.855652, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 00:02:11 2011] Writing fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src20.gif
[Wed Sep 28 00:13:19 2011] Mean detx,y = (-13.23, -1809.74) 
[Wed Sep 28 00:13:20 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 00:13:29 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 00:13:29 2011] Setting source spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Sep 28 00:13:29 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Sep 28 01:25:54 2011] Not generating rmf since there are only 99 counts
[Wed Sep 28 01:25:54 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:25:21 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:21 2011] Error reading totcts from fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Sep 28 03:25:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:24 2011] Using photon index=1.80, rate=0.00193, arf fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src20.arf
[Wed Sep 28 03:25:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:24 2011] Updating source flux to 2e-14
[Wed Sep 28 03:25:35 2011] Flag b found in src. 20 procflags, skipping spectral fitting
[Wed Sep 28 03:25:35 2011] Flag c found in src. 20 procflags, skipping spectral fitting
[Wed Sep 28 03:25:35 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting