[Mon Sep 26 22:29:44 2011] Detection parameters:
  Position = (315.3, 299.9) = 12 43 33.02 11 34 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.4 +/- 17.7
  Background counts = 29.5
  Rate = 0.003 +/- 0.0004

[Mon Sep 26 22:29:45 2011] Off-axis axis estimate = 1.22'
[Tue Sep 27 02:40:54 2011] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:40:54 2011] Initial guess for spatial extent in simple fitting = 7.04"
[Tue Sep 27 02:40:54 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Tue Sep 27 02:40:54 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 7.04"
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src30.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src30.csv
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src30.csv
[Tue Sep 27 05:52:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:52:31 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Sep 27 05:52:31 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Sep 27 05:52:31 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Sep 27 07:51:57 2011] Spatial fit model total counts = 711.088000, observed total counts = 711.000000
[Tue Sep 27 07:51:57 2011] Offset between fit and detection position for source 15 = 0.607244 pixels
[Tue Sep 27 07:51:57 2011] 674.078000 total counts/ 571.400000 bgd. counts: snr = 4.295436
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.607244 pixels
  Position = (315.8, 300.2) = 12 43 32.86 11 34 55.6
  Extent = 9.1 (6.7-12.2)", rotation angle = 0
  Source counts = 102.7 +/- 26.0
  Background counts = 571.4
  Rate = 0.002 +/- 0.0005
[Tue Sep 27 07:51:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:57 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:51:57 2011] Source does appear to be extended
[Tue Sep 27 07:51:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 11:35:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:35:14 2011] Initial guess for spatial extent in simple fitting = 9.10"
[Tue Sep 27 11:35:14 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.930
[Tue Sep 27 11:35:14 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 9.10"
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src28.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src28.csv
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src28.csv
[Tue Sep 27 13:26:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Sep 27 13:26:37 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Sep 27 14:58:47 2011] Spatial fit model total counts = 674.189000, observed total counts = 673.000000
[Tue Sep 27 14:58:47 2011] Offset between fit and detection position for source 15 = 0.394075 pixels
[Tue Sep 27 14:58:47 2011] 634.186000 total counts/ 529.585000 bgd. counts: snr = 4.545357
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.394075 pixels
  Position = (315.5, 300.0) = 12 43 32.96 11 34 54.7
  Extent = 8.7 (6.7-11.4)", rotation angle = 0
  Source counts = 104.6 +/- 25.2
  Background counts = 529.6
  Rate = 0.002 +/- 0.0005
[Tue Sep 27 14:58:47 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:47 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:47 2011] Source does appear to be extended
[Tue Sep 27 14:58:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:02:12 2011] XMMSAS src. selection expression = ellipse(27396.791400, 26049.750200, 520.137615, 520.137615, 0.000000, X, Y)
[Wed Sep 28 00:02:12 2011] Writing source region out to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src15_src.reg
[Wed Sep 28 00:02:12 2011] Extracting stamp from image fullrun_mos1_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (286, 270) - (345, 330)
[Wed Sep 28 00:02:12 2011] XMMSAS bgd. selection expression = annulus(27396.791400, 26049.750200, 866.896025, 1733.792050, X, Y) && !ellipse(25287.417120, 23930.793600, 2546.448073, 2546.448073, 0.000000, X, Y) && !ellipse(26843.656000, 23249.239200, 1221.536035, 1221.536035, 0.000000, X, Y) && !ellipse(26928.876000, 24872.858000, 748.144822, 748.144822, 0.000000, X, Y) && !ellipse(26907.096466, 24226.411621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.188446, 25434.975647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.216949, 25525.336914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27476.422363, 25348.565063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.578705, 23718.467346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27905.169769, 24558.967316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26831.831696, 26580.137573, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 00:02:12 2011] Writing fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src15.gif
[Wed Sep 28 00:17:05 2011] Mean detx,y = (-942.44, -2767.07) 
[Wed Sep 28 00:17:06 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 00:17:15 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 00:17:15 2011] Setting source spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Sep 28 00:17:15 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Sep 28 03:25:22 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:22 2011] Error reading totcts from fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Sep 28 03:25:25 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:25 2011] Using photon index=1.80, rate=0.00204, arf fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src15.arf
[Wed Sep 28 03:25:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:25 2011] Updating source flux to 2.2e-14