[Mon Sep 26 22:29:43 2011] Detection parameters:
  Position = (291.2, 275.9) = 12 43 40.14 11 33 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14195.6 +/- 144.6
  Background counts = 43.0
  Rate = 0.3 +/- 0.003

[Mon Sep 26 22:29:45 2011] Off-axis axis estimate = 1.72'
[Tue Sep 27 02:40:54 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:40:54 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Sep 27 02:40:54 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Tue Sep 27 02:40:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src1.csv
[Tue Sep 27 05:52:29 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Sep 27 05:52:29 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src1.csv
[Tue Sep 27 05:52:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 05:52:30 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 05:52:30 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 07:51:57 2011] Spatial fit model total counts = 21080.000000, observed total counts = 21080.000000
[Tue Sep 27 07:51:57 2011] Offset between fit and detection position for source 1 = 0.205823 pixels
[Tue Sep 27 07:51:57 2011] 21111.470000 total counts/ 8512.870000 bgd. counts: snr = 136.547668
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.205823 pixels
  Position = (291.2, 275.7) = 12 43 40.14 11 33 9.0
  Extent = 10.0 (9.7-10.2)", rotation angle = 0
  Source counts = 12598.6 +/- 145.3
  Background counts = 8512.9
  Rate = 0.2 +/- 0.003
[Tue Sep 27 07:51:57 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:51:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:51:57 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:51:57 2011] Source does appear to be extended
[Tue Sep 27 07:51:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 11:35:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 11:35:14 2011] Initial guess for spatial extent in simple fitting = 9.98"
[Tue Sep 27 11:35:14 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.961
[Tue Sep 27 11:35:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.98"
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src1.csv
[Tue Sep 27 13:26:36 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Sep 27 13:26:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src1.csv
[Tue Sep 27 13:26:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 13:26:37 2011] fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 13:26:37 2011] Fit fullrun_mos1_xmm0021540201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 14:58:47 2011] Spatial fit model total counts = 22681.700000, observed total counts = 22697.000000
[Tue Sep 27 14:58:47 2011] Offset between fit and detection position for source 1 = 0.065426 pixels
[Tue Sep 27 14:58:47 2011] 22782.910000 total counts/ 9162.210000 bgd. counts: snr = 142.298167
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.065426 pixels
  Position = (291.2, 275.6) = 12 43 40.14 11 33 8.8
  Extent = 10.6 (10.4-10.8)", rotation angle = 0
  Source counts = 13620.7 +/- 150.9
  Background counts = 9162.2
  Rate = 0.3 +/- 0.003
[Tue Sep 27 14:58:47 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:58:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:58:47 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:58:47 2011] Source does appear to be extended
[Tue Sep 27 14:58:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:02:11 2011] Counts = 13620.700000, rescaling region sizes by 3.000000
[Wed Sep 28 00:02:11 2011] XMMSAS src. selection expression = ellipse(25287.417120, 23930.793600, 1909.836055, 1909.836055, 0.000000, X, Y)
[Wed Sep 28 00:02:11 2011] Writing source region out to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep 28 00:02:11 2011] Extracting stamp from image fullrun_mos1_xmm0021540201_pi300-10000_cl_sm2.00.img.gz, (181, 166) - (401, 385)
[Wed Sep 28 00:02:11 2011] XMMSAS bgd. selection expression = annulus(25287.417120, 23930.793600, 9549.180275, 19098.360550, X, Y) && !ellipse(16783.574400, 24437.303000, 432.687212, 432.687212, 0.000000, X, Y) && !ellipse(26305.250800, 20329.554000, 555.311216, 555.311216, 0.000000, X, Y) && !ellipse(32682.156500, 30957.247800, 493.117614, 493.117614, 0.000000, X, Y) && !ellipse(17368.018265, 26450.311951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37696.532520, 27503.196200, 536.117615, 316.273609, 79.023500, X, Y) && !ellipse(26089.922000, 22216.722000, 283.023208, 283.023208, 0.000000, X, Y) && !ellipse(23236.450600, 23245.795400, 418.301612, 418.301612, 0.000000, X, Y) && !ellipse(26843.656000, 23249.239200, 1221.536035, 1221.536035, 0.000000, X, Y) && !ellipse(17386.542404, 26999.918945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24137.236000, 24029.902000, 659.467219, 659.467219, 0.000000, X, Y) && !ellipse(36916.672000, 27246.451000, 373.347211, 373.347211, 0.000000, X, Y) && !ellipse(18965.803000, 29677.571400, 454.328013, 454.328013, 0.000000, X, Y) && !ellipse(26928.876000, 24872.858000, 748.144822, 748.144822, 0.000000, X, Y) && !ellipse(27580.118200, 31926.471000, 344.246410, 344.246410, 0.000000, X, Y) && !ellipse(21356.817459, 13251.473663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23081.451477, 16329.869949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.096466, 24226.411621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26558.188446, 25434.975647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29152.071800, 15985.507200, 683.548020, 340.830410, 318.126584, X, Y) && !ellipse(27441.354600, 20183.448200, 338.818410, 338.818410, 0.000000, X, Y) && !ellipse(24105.815400, 22581.326000, 1319.128038, 1319.128038, 0.000000, X, Y) && !ellipse(25836.216949, 25525.336914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26639.992554, 22365.445831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17610.823640, 32990.837800, 449.127213, 361.320010, 322.521765, X, Y) && !ellipse(14544.523400, 25972.975600, 315.675209, 315.675209, 0.000000, X, Y) && !ellipse(23520.046387, 24402.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27732.090000, 22202.942000, 1109.248032, 1109.248032, 0.000000, X, Y) && !ellipse(27396.791400, 26049.750200, 693.516820, 693.516820, 0.000000, X, Y) && !ellipse(29465.156128, 21889.612808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39821.634000, 33431.670040, 498.190440, 498.190440, 0.000000, X, Y) && !ellipse(27596.933000, 22224.265400, 400.189612, 400.189612, 0.000000, X, Y) && !ellipse(11325.699200, 31011.352400, 515.368015, 515.368015, 0.000000, X, Y) && !ellipse(26494.257996, 21811.561584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10475.090800, 24735.678400, 471.208014, 471.208014, 0.000000, X, Y) && !ellipse(27476.422363, 25348.565063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29544.499023, 20531.984818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25260.497742, 21762.710373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21147.390000, 15858.630600, 703.174927, 703.174927, 0.000000, X, Y) && !ellipse(27790.578705, 23718.467346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29540.159800, 17133.177600, 784.924023, 784.924023, 0.000000, X, Y) && !ellipse(24209.451294, 21904.911087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22776.956787, 23860.790192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24094.292000, 20211.110000, 1409.280041, 1409.280041, 0.000000, X, Y) && !ellipse(38690.636000, 19507.557200, 563.956016, 303.952809, 106.751389, X, Y) && !ellipse(21852.069600, 24886.172000, 337.830410, 337.830410, 0.000000, X, Y) && !ellipse(10407.276140, 30863.563800, 679.980820, 679.980820, 0.000000, X, Y) && !ellipse(15979.958328, 13509.060623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27905.169769, 24558.967316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26831.831696, 26580.137573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37518.199829, 26744.069702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23726.766968, 25525.421875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24216.455261, 26716.855652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35821.633453, 21786.670685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22447.919006, 22972.850159, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 00:02:11 2011] Writing fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src1.gif
[Wed Sep 28 00:02:20 2011] Mean detx,y = (179.31, -15.84) 
[Wed Sep 28 00:02:23 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 00:09:59 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 00:09:59 2011] Setting source spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 00:09:59 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep 28 03:25:21 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:25:21 2011] Error reading totcts from fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 03:25:23 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:25:23 2011] Using photon index=1.80, rate=0.265, arf fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 03:25:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:25:23 2011] Updating source flux to 2.2e-12
[Wed Sep 28 03:29:46 2011] Reading fit data from xmm0021540201/analysis//spectral/fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Sep 28 03:29:46 2011] Spectral fit parameter nH value = 9.52767e+21
[Wed Sep 28 03:29:46 2011] Spectral fit parameter PhoIndex value = 7.63408
[Wed Sep 28 03:29:46 2011] Failed to get F(0.3-8.0) from xmm0021540201/analysis//spectral/fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 03:29:46 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:29:46 2011] Using Nh = 9.5e+21, photon index=7.63, rate=0.265, arf fullrun_mos1_xmm0021540201_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 03:29:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:29:46 2011] Updating source flux to 1.3e-12