[Fri Sep 30 04:25:37 2011] Detection parameters:
  Position = (291.9, 277.0) = 15 6 29.30 1 36 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10844.2 +/- 127.6
  Background counts = 123.9
  Rate = 0.4 +/- 0.005

[Fri Sep 30 04:25:38 2011] Off-axis axis estimate = 1.62'
[Fri Sep 30 04:26:48 2011] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:26:48 2011] Initial guess for spatial extent in simple fitting = 7.24"
[Fri Sep 30 04:26:48 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Fri Sep 30 04:26:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Fri Sep 30 05:46:12 2011] fullrun_pn_xmm0021540101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 30 05:46:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540101_pi300-10000_cl_pass0_src1.csv
[Fri Sep 30 05:46:12 2011] fullrun_pn_xmm0021540101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 30 05:46:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540101_pi300-10000_cl_pass0_src1.csv
[Fri Sep 30 05:46:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 05:46:13 2011] fullrun_pn_xmm0021540101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 05:46:13 2011] fullrun_pn_xmm0021540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 05:46:13 2011] Fit fullrun_pn_xmm0021540101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 05:46:23 2011] Spatial fit model total counts = 24423.900000, observed total counts = 24426.000000
[Fri Sep 30 05:46:23 2011] Offset between fit and detection position for source 1 = 0.384612 pixels
[Fri Sep 30 05:46:23 2011] 24369.300000 total counts/ 12310.400000 bgd. counts: snr = 108.685501
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.384612 pixels
  Position = (291.6, 276.9) = 15 6 29.41 1 36 21.3
  Extent = 12.9 (12.5-13.4)", rotation angle = 0
  Source counts = 12058.9 +/- 156.1
  Background counts = 12310.4
  Rate = 0.4 +/- 0.005
[Fri Sep 30 05:46:23 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 05:46:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 05:46:23 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 05:46:23 2011] Source does appear to be extended
[Fri Sep 30 05:46:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 05:46:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 05:46:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 05:46:28 2011] Initial guess for spatial extent in simple fitting = 12.94"
[Fri Sep 30 05:46:28 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.015
[Fri Sep 30 05:46:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 12.94"
[Fri Sep 30 07:20:19 2011] fullrun_pn_xmm0021540101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 30 07:20:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540101_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 07:20:19 2011] fullrun_pn_xmm0021540101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 30 07:20:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021540101_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 07:20:19 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021540101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021540101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 07:20:20 2011] fullrun_pn_xmm0021540101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 07:20:20 2011] fullrun_pn_xmm0021540101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 07:20:20 2011] Fit fullrun_pn_xmm0021540101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 07:20:29 2011] Spatial fit model total counts = 35556.000000, observed total counts = 35579.000000
[Fri Sep 30 07:20:29 2011] Offset between fit and detection position for source 1 = 0.272735 pixels
[Fri Sep 30 07:20:29 2011] 35431.600000 total counts/ 15519.500000 bgd. counts: snr = 159.837325
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.272735 pixels
  Position = (291.4, 276.7) = 15 6 29.45 1 36 20.3
  Extent = 17.8 (17.4-18.0)", rotation angle = 0
  Source counts = 19912.1 +/- 188.2
  Background counts = 15519.5
  Rate = 0.7 +/- 0.007
[Fri Sep 30 07:20:29 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 07:20:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 07:20:29 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 07:20:29 2011] Source does appear to be extended
[Fri Sep 30 07:20:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 07:20:33 2011] Counts = 19912.100000, rescaling region sizes by 3.000000
[Fri Sep 30 07:20:33 2011] XMMSAS src. selection expression = ellipse(25306.155400, 24023.468200, 3198.744092, 3198.744092, 0.000000, X, Y)
[Fri Sep 30 07:20:33 2011] Writing source region out to fullrun_pn_xmm0021540101_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 30 07:20:33 2011] Extracting stamp from image fullrun_pn_xmm0021540101_pi300-10000_cl_sm2.00.img.gz, (108, 93) - (475, 461)
[Fri Sep 30 07:20:33 2011] XMMSAS bgd. selection expression = annulus(25306.155400, 24023.468200, 15993.720460, 31987.440920, X, Y) && !ellipse(25445.632935, 25862.939819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23635.718048, 24487.608093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25912.748000, 22724.806000, 917.304026, 917.304026, 0.000000, X, Y) && !ellipse(24212.842000, 22956.670000, 739.344821, 739.344821, 0.000000, X, Y) && !ellipse(25729.984000, 22776.248000, 557.349616, 557.349616, 0.000000, X, Y) && !ellipse(38453.717987, 30575.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40681.422974, 34762.643158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29278.368780, 30263.678800, 456.090413, 456.090413, 0.000000, X, Y) && !ellipse(34618.169739, 29714.341248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18520.079600, 10550.979400, 483.796014, 483.796014, 0.000000, X, Y) && !ellipse(24949.519600, 21951.382000, 1276.544037, 1276.544037, 0.000000, X, Y) && !ellipse(26488.175323, 22233.015625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25168.962000, 22240.588594, 1077.448386, 385.049301, 77.555044, X, Y) && !ellipse(34987.635651, 20157.471695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33077.437653, 13981.165985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20681.659800, 37365.112800, 810.825279, 810.825279, 0.000000, X, Y) && !ellipse(18704.140518, 9551.130127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30369.044922, 30720.188477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22469.576900, 30709.430800, 440.882413, 440.882413, 0.000000, X, Y) && !ellipse(18555.783070, 30204.611712, 514.059434, 450.349339, -0.000000, X, Y) && !ellipse(16843.515960, 27771.062200, 427.779212, 427.779212, 0.000000, X, Y) && !ellipse(26056.634827, 26821.450531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21726.160000, 26353.286000, 1270.040037, 1270.040037, 0.000000, X, Y) && !ellipse(28089.212800, 25582.494000, 1177.952034, 1177.952034, 0.000000, X, Y) && !ellipse(34636.164000, 25646.162400, 1629.808047, 1629.808047, 0.000000, X, Y) && !ellipse(27585.721954, 25204.951874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39830.086000, 25263.494000, 1898.936055, 1898.936055, 0.000000, X, Y) && !ellipse(41312.472992, 24293.982117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27812.100372, 23323.582184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27345.701996, 22659.211548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16707.946000, 21183.180200, 450.229613, 450.229613, 0.000000, X, Y) && !ellipse(22157.348600, 21204.939400, 601.420017, 601.420017, 0.000000, X, Y) && !ellipse(37842.451720, 19777.948800, 499.386414, 499.386414, 0.000000, X, Y) && !ellipse(13786.641281, 19622.018661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27565.952606, 13381.069626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35642.834800, 16708.630380, 1925.072055, 1115.496032, 260.623866, X, Y) && !ellipse(20278.749451, 16145.395859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38386.792664, 37285.178528, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 30 07:20:33 2011] Writing fullrun_pn_xmm0021540101_pi300-10000_pass1_cl_src1.gif
[Fri Sep 30 07:20:57 2011] Mean detx,y = (306.28, 257.15) 
[Fri Sep 30 07:21:04 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 07:26:43 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 07:26:43 2011] Setting source spectrum file to fullrun_pn_xmm0021540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 07:26:43 2011] Setting bgd. spectrum file to fullrun_pn_xmm0021540101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Oct  1 08:57:17 2011] Updating aperture counts using extracted products
[Sat Oct  1 08:57:17 2011] Error reading totcts from fullrun_pn_xmm0021540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Oct  1 08:57:18 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 08:57:18 2011] Using photon index=1.80, rate=0.695, arf fullrun_pn_xmm0021540101_pi300-10000_pass1_cl_src1.arf
[Sat Oct  1 08:57:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct  1 08:57:18 2011] Updating source flux to 1.5e-12
[Sat Oct  1 09:02:37 2011] Reading fit data from xmm0021540101/analysis//spectral/fullrun_pn_xmm0021540101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Oct  1 09:02:37 2011] Spectral fit parameter nH value = 1.22712e+22
[Sat Oct  1 09:02:37 2011] Spectral fit parameter PhoIndex value = 9.99613
[Sat Oct  1 09:02:37 2011] Failed to get F(0.3-8.0) from xmm0021540101/analysis//spectral/fullrun_pn_xmm0021540101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 09:02:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 09:02:37 2011] Using Nh = 1.2e+22, photon index=10.00, rate=0.695, arf fullrun_pn_xmm0021540101_pi300-10000_pass1_cl_src1.arf
[Sat Oct  1 09:02:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct  1 09:02:37 2011] Updating source flux to 8.5e-13