[Mon Jun 18 19:59:54 2012] Detection parameters:
  Position = (303.0, 302.8) = 17 32 57.67 43 46 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.0 +/- 17.6
  Background counts = 79.7
  Rate = 0.02 +/- 0.003

[Mon Jun 18 19:59:54 2012] Off-axis axis estimate = 0.46'
[Mon Jun 18 20:01:29 2012] Using EEF radius (= 6.66 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 20:01:29 2012] Initial guess for spatial extent in simple fitting = 6.66"
[Mon Jun 18 20:01:29 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.970
[Mon Jun 18 20:01:29 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.66"
[Mon Jun 18 20:31:40 2012] fullrun_pn_xmm0021140901_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jun 18 20:31:40 2012] fullrun_pn_xmm0021140901_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jun 18 20:31:40 2012] Fit fullrun_pn_xmm0021140901_pi300-10000_cl_pass0_src7 appears to have run properly
[Mon Jun 18 20:31:40 2012] fullrun_pn_xmm0021140901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jun 18 20:31:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140901_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jun 18 20:31:40 2012] fullrun_pn_xmm0021140901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jun 18 20:31:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140901_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jun 18 20:31:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140901_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 21:56:03 2012] Warning, spatial fit 7 centroid is now closest to src. 6
[Mon Jun 18 21:56:03 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 21:56:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 21:56:03 2012] Assessing source extent using major
[Mon Jun 18 21:56:03 2012] Source does appear to be extended
[Mon Jun 18 21:56:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 21:56:03 2012] Source is confused with source 3
[Mon Jun 18 21:56:15 2012] Using EEF radius (= 6.66 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 21:56:15 2012] Initial guess for spatial extent in simple fitting = 6.66"
[Mon Jun 18 21:56:15 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.970
[Mon Jun 18 21:56:15 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.66"
[Mon Jun 18 22:29:15 2012] fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jun 18 22:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_src7.csv
[Mon Jun 18 22:29:15 2012] fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jun 18 22:29:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_src7.csv
[Mon Jun 18 22:29:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 22:29:16 2012] fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jun 18 22:29:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 18 22:29:16 2012] fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jun 18 22:29:16 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 18 22:29:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140901_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 23:56:12 2012] Source 8 is offset by -5.949809 and -4.130527 pixels which is larger than
2 X fitted extent = 0.769471 x 0.769471, not incorporating fit results
[Mon Jun 18 23:56:12 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 23:56:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 23:56:12 2012] Assessing source extent using major
[Mon Jun 18 23:56:12 2012] Source does appear to be extended
[Mon Jun 18 23:56:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 23:56:21 2012] XMMSAS src. selection expression = ellipse(26314.026642, 26291.634125, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 18 23:56:21 2012] Writing source region out to fullrun_pn_xmm0021140901_pi300-10000_pass1_cl_src8_src.reg
[Mon Jun 18 23:56:21 2012] Extracting stamp from image fullrun_pn_xmm0021140901_pi300-10000_cl_sm2.00.img.gz, (266, 265) - (341, 340)
[Mon Jun 18 23:56:21 2012] XMMSAS bgd. selection expression = annulus(26314.026642, 26291.634125, 1087.500000, 2175.000000, X, Y) && !ellipse(25046.010000, 25063.044000, 1059.656030, 1059.656030, 0.000000, X, Y) && !ellipse(26091.274800, 25767.666400, 318.942409, 318.942409, 0.000000, X, Y) && !ellipse(25292.849274, 25782.141968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23888.437012, 26351.969666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23568.521912, 25452.363434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27028.325104, 25188.227844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27414.414154, 24332.928741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23771.936981, 24480.784668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23626.388000, 23565.522000, 1194.504034, 1194.504034, 0.000000, X, Y) && !ellipse(26441.996399, 23701.921204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25577.386108, 23277.095276, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 18 23:56:21 2012] Writing fullrun_pn_xmm0021140901_pi300-10000_pass1_cl_src8.gif
[Mon Jun 18 23:58:53 2012] Mean detx,y = (-1415.09, 1519.28) 
[Mon Jun 18 23:58:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 23:59:11 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 23:59:11 2012] Setting source spectrum file to fullrun_pn_xmm0021140901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun 18 23:59:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140901_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Jun 19 00:12:59 2012] Not generating rmf since there are only 90 counts
[Tue Jun 19 00:12:59 2012] rmf not generated due to insufficient counts
[Tue Jun 19 00:47:50 2012] Updating aperture counts using extracted products
[Tue Jun 19 00:47:50 2012] Error reading totcts from fullrun_pn_xmm0021140901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jun 19 00:47:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 00:47:50 2012] Using photon index=1.80, rate=0.0177, arf fullrun_pn_xmm0021140901_pi300-10000_pass1_cl_src8.arf
[Tue Jun 19 00:47:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 00:47:50 2012] Updating source flux to 5.1e-14
[Tue Jun 19 00:48:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting