[Mon Jun 18 20:00:25 2012] Detection parameters:
  Position = (303.2, 283.9) = 17 32 57.60 43 45 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 15.3
  Background counts = 36.0
  Rate = 0.01 +/- 0.002

[Mon Jun 18 20:00:25 2012] Off-axis axis estimate = 1.11'
[Mon Jun 18 21:07:58 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 21:07:58 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Mon Jun 18 21:07:58 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Mon Jun 18 21:07:58 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 6.98"
[Mon Jun 18 21:55:58 2012] fullrun_mos2_xmm0021140901_pi300-10000_cl_pass0_src8.ximg exists
[Mon Jun 18 21:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021140901_pi300-10000_cl_pass0_src8.csv
[Mon Jun 18 21:55:58 2012] fullrun_mos2_xmm0021140901_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Jun 18 21:55:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021140901_pi300-10000_cl_pass0_src8.csv
[Mon Jun 18 21:55:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021140901_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021140901_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 21:55:59 2012] fullrun_mos2_xmm0021140901_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Jun 18 21:55:59 2012] fullrun_mos2_xmm0021140901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Jun 18 21:55:59 2012] Fit fullrun_mos2_xmm0021140901_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Jun 18 21:56:09 2012] Spatial fit model total counts = 1070.990000, observed total counts = 1044.000000
[Mon Jun 18 21:56:09 2012] Offset between fit and detection position for source 6 = 4.060432 pixels
[Mon Jun 18 21:56:09 2012] Warning, changing simple spatial fit ID from 8 to 5
[Mon Jun 18 21:56:09 2012] 1042.165000 total counts/ 945.782000 bgd. counts: snr = 3.134043
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 4.060432 pixels
  Position = (302.4, 279.9) = 17 32 57.92 43 44 58.8
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source counts = 96.4 +/- 32.3
  Background counts = 945.8
  Rate = 0.02 +/- 0.006
[Mon Jun 18 21:56:09 2012] Spatial fit model total counts = 601.576000, observed total counts = 547.000000
[Mon Jun 18 21:56:09 2012] Offset between fit and detection position for source 6 = 0.682562 pixels
[Mon Jun 18 21:56:09 2012] Warning, changing simple spatial fit ID from 5 to 7
[Mon Jun 18 21:56:09 2012] 566.169000 total counts/ 440.946000 bgd. counts: snr = 5.963365
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.682562 pixels
  Position = (301.7, 280.0) = 17 32 58.19 43 44 59.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source counts = 125.2 +/- 23.8
  Background counts = 440.9
  Rate = 0.02 +/- 0.005
[Mon Jun 18 21:56:09 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 21:56:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 21:56:09 2012] Assessing source extent using major
[Mon Jun 18 21:56:09 2012] Source does appear to be extended
[Mon Jun 18 21:56:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 21:56:09 2012] Source is confused with source 4
[Mon Jun 18 22:54:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 18 22:54:00 2012] Initial guess for spatial extent in simple fitting = 10.90"
[Mon Jun 18 22:54:00 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.996
[Mon Jun 18 22:54:00 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.90"
[Mon Jun 18 23:56:09 2012] fullrun_mos2_xmm0021140901_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jun 18 23:56:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021140901_pi300-10000_cl_pass1_src7.csv
[Mon Jun 18 23:56:09 2012] fullrun_mos2_xmm0021140901_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jun 18 23:56:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0021140901_pi300-10000_cl_pass1_src7.csv
[Mon Jun 18 23:56:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0021140901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0021140901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 23:56:09 2012] fullrun_mos2_xmm0021140901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jun 18 23:56:09 2012] fullrun_mos2_xmm0021140901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jun 18 23:56:09 2012] Fit fullrun_mos2_xmm0021140901_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Jun 18 23:56:16 2012] Spatial fit model total counts = 1070.020000, observed total counts = 1044.000000
[Mon Jun 18 23:56:16 2012] Offset between fit and detection position for source 6 = 0.711097 pixels
[Mon Jun 18 23:56:16 2012] Warning, changing simple spatial fit ID from 7 to 4
[Mon Jun 18 23:56:16 2012] 1057.873900 total counts/ 967.313000 bgd. counts: snr = 2.911771
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.711097 pixels
  Position = (302.4, 280.2) = 17 32 57.92 43 45 0.3
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source counts = 90.6 +/- 32.5
  Background counts = 967.3
  Rate = 0.02 +/- 0.006
[Mon Jun 18 23:56:16 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 23:56:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 23:56:16 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 23:56:16 2012] Source does appear to be extended
[Mon Jun 18 23:56:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 00:34:27 2012] XMMSAS src. selection expression = ellipse(26259.814000, 24331.776000, 834.468024, 834.468024, 0.000000, X, Y)
[Tue Jun 19 00:34:27 2012] Writing source region out to fullrun_mos2_xmm0021140901_pi300-10000_pass1_cl_src6_src.reg
[Tue Jun 19 00:34:27 2012] Extracting stamp from image fullrun_mos2_xmm0021140901_pi300-10000_cl_sm2.00.img.gz, (254, 232) - (350, 328)
[Tue Jun 19 00:34:27 2012] XMMSAS bgd. selection expression = annulus(26259.814000, 24331.776000, 1390.780040, 2781.560080, X, Y) && !ellipse(25041.025600, 25048.970000, 1105.304032, 1105.304032, 0.000000, X, Y) && !ellipse(25498.051200, 25425.872400, 1064.864031, 1064.864031, 0.000000, X, Y) && !ellipse(25763.957672, 24663.790527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24979.746000, 26010.318000, 1126.368032, 1126.368032, 0.000000, X, Y) && !ellipse(25638.682770, 23892.265564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.219849, 25699.063446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26140.916077, 23619.485199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24587.503571, 26538.610260, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 00:34:27 2012] Writing fullrun_mos2_xmm0021140901_pi300-10000_pass1_cl_src6.gif
[Tue Jun 19 00:35:38 2012] Mean detx,y = (615.43, -195.88) 
[Tue Jun 19 00:35:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 00:35:44 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 00:35:44 2012] Setting source spectrum file to fullrun_mos2_xmm0021140901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 19 00:35:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0021140901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun 19 00:47:20 2012] Not generating rmf since there are only 90 counts
[Tue Jun 19 00:47:20 2012] rmf not generated due to insufficient counts
[Tue Jun 19 00:47:50 2012] Updating aperture counts using extracted products
[Tue Jun 19 00:47:50 2012] Error reading totcts from fullrun_mos2_xmm0021140901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun 19 00:47:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 00:47:50 2012] Using photon index=1.80, rate=0.0176, arf fullrun_mos2_xmm0021140901_pi300-10000_pass1_cl_src6.arf
[Tue Jun 19 00:47:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 00:47:50 2012] Updating source flux to 1.8e-13
[Tue Jun 19 00:48:05 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Tue Jun 19 00:48:05 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting