[Tue Aug 28 02:52:33 2012] Detection parameters:
  Position = (301.1, 294.2) = 17 32 58.40 43 46 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.4 +/- 12.5
  Background counts = 30.8
  Rate = 0.02 +/- 0.005

[Tue Aug 28 02:52:33 2012] Off-axis axis estimate = 0.36'
[Tue Aug 28 02:53:44 2012] Using EEF radius (= 6.61 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 02:53:44 2012] Initial guess for spatial extent in simple fitting = 6.61"
[Tue Aug 28 02:53:44 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.981
[Tue Aug 28 02:53:44 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 6.61"
[Tue Aug 28 03:03:04 2012] fullrun_pn_xmm0021140801_pi300-10000_cl_pass0_src4.ximg exists
[Tue Aug 28 03:03:04 2012] Warning: total counts is not > 0
[Tue Aug 28 03:03:04 2012] fullrun_pn_xmm0021140801_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Aug 28 03:03:04 2012] Warning: total counts is not > 0
[Tue Aug 28 03:03:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140801_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140801_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 03:03:04 2012] fullrun_pn_xmm0021140801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Aug 28 03:03:04 2012] Warning: total counts is not > 0
[Tue Aug 28 03:03:04 2012] fullrun_pn_xmm0021140801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Aug 28 03:03:04 2012] Warning: total counts is not > 0
[Tue Aug 28 03:03:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140801_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 03:23:11 2012] Source 4 is offset by -5.244942 and -1.431953 pixels which is larger than
2 X fitted extent = 0.759646 x 0.759646, not incorporating fit results
[Tue Aug 28 03:23:11 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 03:23:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 03:23:11 2012] Assessing source extent using major
[Tue Aug 28 03:23:11 2012] Source does appear to be extended
[Tue Aug 28 03:23:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 03:23:11 2012] Source is confused with source 5
[Tue Aug 28 03:23:17 2012] Using EEF radius (= 6.61 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 03:23:17 2012] Initial guess for spatial extent in simple fitting = 6.61"
[Tue Aug 28 03:23:17 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.981
[Tue Aug 28 03:23:17 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 6.61"
[Tue Aug 28 03:35:55 2012] fullrun_pn_xmm0021140801_pi300-10000_cl_pass1_src4.ximg exists
[Tue Aug 28 03:35:55 2012] Warning: total counts is not > 0
[Tue Aug 28 03:35:55 2012] fullrun_pn_xmm0021140801_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Aug 28 03:35:55 2012] Warning: total counts is not > 0
[Tue Aug 28 03:35:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140801_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 03:35:55 2012] fullrun_pn_xmm0021140801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Aug 28 03:35:55 2012] Warning: total counts is not > 0
[Tue Aug 28 03:35:55 2012] fullrun_pn_xmm0021140801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Aug 28 03:35:55 2012] Warning: total counts is not > 0
[Tue Aug 28 03:35:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140801_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 03:54:53 2012] Source 4 is offset by -5.453218 and -6.302893 pixels which is larger than
2 X fitted extent = 0.759646 x 0.759646, not incorporating fit results
[Tue Aug 28 03:54:53 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 03:54:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 03:54:53 2012] Assessing source extent using major
[Tue Aug 28 03:54:53 2012] Source does appear to be extended
[Tue Aug 28 03:54:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 03:54:59 2012] XMMSAS src. selection expression = ellipse(26143.202057, 25547.384277, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 03:54:59 2012] Writing source region out to fullrun_pn_xmm0021140801_pi300-10000_pass1_cl_src4_src.reg
[Tue Aug 28 03:54:59 2012] Extracting stamp from image fullrun_pn_xmm0021140801_pi300-10000_cl_sm2.00.img.gz, (264, 257) - (339, 332)
[Tue Aug 28 03:54:59 2012] XMMSAS bgd. selection expression = annulus(26143.202057, 25547.384277, 1087.500000, 2175.000000, X, Y) && !ellipse(25204.009338, 25077.948547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25534.650757, 24397.236206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24540.403351, 24920.651337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25697.380157, 25911.402069, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 03:54:59 2012] Writing fullrun_pn_xmm0021140801_pi300-10000_pass1_cl_src4.gif
[Tue Aug 28 03:56:03 2012] Mean detx,y = (nan, nan) 
[Tue Aug 28 03:56:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 03:56:29 2012] grppha failed
[Tue Aug 28 03:56:29 2012] Setting source spectrum file to fullrun_pn_xmm0021140801_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Aug 28 03:56:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Aug 28 03:57:02 2012] Not generating rmf since there are only 54 counts
[Tue Aug 28 03:57:02 2012] rmf not generated due to insufficient counts
[Tue Aug 28 03:58:42 2012] Updating aperture counts using extracted products
[Tue Aug 28 03:58:42 2012] Error reading totcts from fullrun_pn_xmm0021140801_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Aug 28 03:58:42 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 03:58:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 03:58:46 2012] xmm0021140801/analysis//spectral/fullrun_pn_xmm0021140801_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete