[Thu Jun 14 14:06:35 2012] Detection parameters:
  Position = (192.3, 426.0) = 17 33 50.00 43 55 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.7 +/- 15.8
  Background counts = 33.7
  Rate = 0.07 +/- 0.01

[Thu Jun 14 14:06:37 2012] Off-axis axis estimate = 12.03'
[Thu Jun 14 14:08:44 2012] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:08:44 2012] Initial guess for spatial extent in simple fitting = 12.44"
[Thu Jun 14 14:08:44 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.930
[Thu Jun 14 14:08:44 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.44"
[Thu Jun 14 19:46:34 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun 14 19:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src9.csv
[Thu Jun 14 19:46:34 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun 14 19:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src9.csv
[Thu Jun 14 19:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:46:37 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun 14 19:46:37 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun 14 19:46:37 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jun 14 20:07:43 2012] Spatial fit model total counts = 1107.030000, observed total counts = 1086.000000
[Thu Jun 14 20:07:43 2012] Offset between fit and detection position for source 9 = 1.081610 pixels
[Thu Jun 14 20:07:43 2012] Warning, changing simple spatial fit ID from 9 to 1
[Thu Jun 14 20:07:43 2012] 1043.468000 total counts/ 486.675000 bgd. counts: snr = 25.239122
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.081610 pixels
  Position = (191.5, 426.6) = 17 33 50.35 43 55 13.1
  Extent = 25.6 (25.5-51.1)", rotation angle = 0
  Source counts = 556.8 +/- 32.3
  Background counts = 486.7
  Rate = 1 +/- 0.07
[Thu Jun 14 20:07:43 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:07:43 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 20:07:43 2012] Source does appear to be extended
[Thu Jun 14 20:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:07:43 2012] Source is confused with source 1
[Thu Jun 14 20:07:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:07:54 2012] Initial guess for spatial extent in simple fitting = 25.56"
[Thu Jun 14 20:07:54 2012] source mask rpix=5.9, npix_max = 162, mask sum = 157, frac = 0.965
[Thu Jun 14 20:07:54 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 25.56"
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun 15 01:34:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src9.csv
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun 15 01:34:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src9.csv
[Fri Jun 15 01:34:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 01:34:08 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun 15 01:34:08 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun 15 01:34:08 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jun 15 01:47:22 2012] Warning, spatial fit 9 centroid is now closest to src. 14
[Fri Jun 15 01:47:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 01:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 01:47:22 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 01:47:22 2012] Source does appear to be extended
[Fri Jun 15 01:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 01:47:35 2012] XMMSAS src. selection expression = ellipse(16610.514000, 37068.428000, 1533.846044, 1533.846044, 0.000000, X, Y)
[Fri Jun 15 01:47:35 2012] Writing source region out to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src9_src.reg
[Fri Jun 15 01:47:35 2012] Extracting stamp from image fullrun_pn_xmm0021140501_pi300-10000_cl_sm2.00.img.gz, (103, 338) - (280, 515)
[Fri Jun 15 01:47:35 2012] XMMSAS bgd. selection expression = annulus(16610.514000, 37068.428000, 2556.410074, 5112.820147, X, Y) && !ellipse(16219.466000, 37047.044000, 3769.024108, 3769.024108, 0.000000, X, Y) && !ellipse(14710.911407, 38316.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15757.288986, 37956.855804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15235.820000, 38433.884000, 2078.824060, 2078.824060, 0.000000, X, Y) && !ellipse(15283.415375, 37800.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14309.932953, 37711.520477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14750.112915, 37489.522858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15413.544998, 37286.811371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17118.250000, 36634.262000, 1982.832057, 1982.832057, 0.000000, X, Y) && !ellipse(16988.168000, 35932.092000, 1884.512054, 1884.512054, 0.000000, X, Y) && !ellipse(17535.098000, 35972.968000, 4090.104118, 4090.104118, 0.000000, X, Y) && !ellipse(19332.072000, 34699.554000, 1716.544049, 1716.544049, 0.000000, X, Y) && !ellipse(19984.578000, 34216.166000, 1664.056048, 1239.072036, 219.534000, X, Y) && !ellipse(17428.063080, 35549.163727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18022.154000, 35668.062000, 3433.088099, 3433.088099, 0.000000, X, Y) && !ellipse(18205.606995, 34031.641907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19879.518005, 33539.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20822.644150, 33100.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19450.748032, 32841.163940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20873.976486, 32579.144409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20185.571198, 33011.404419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20432.600433, 32305.710907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21514.589920, 31461.621338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20553.278152, 31235.388947, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 01:47:35 2012] Writing fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src9.gif
[Fri Jun 15 01:57:05 2012] Mean detx,y = (-15433.49, -131.23) 
[Fri Jun 15 01:57:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 01:57:44 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 01:57:45 2012] Setting source spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 15 01:57:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jun 15 04:03:52 2012] Updating aperture counts using extracted products
[Fri Jun 15 04:03:52 2012] Error reading totcts from fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 15 04:03:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:03:53 2012] Using photon index=1.80, rate=1.22, arf fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src9.arf
[Fri Jun 15 04:03:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:03:53 2012] Updating source flux to 8.1e-12
[Fri Jun 15 04:04:06 2012] Flag c found in src. 9 procflags, skipping spectral fitting
[Fri Jun 15 04:09:43 2012] Reading fit data from xmm0021140501/analysis//spectral/fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src9_pl.csv
[Fri Jun 15 04:09:43 2012] Spectral fit parameter nH value = 1.50221e+12
[Fri Jun 15 04:09:43 2012] Spectral fit parameter PhoIndex value = -0.317063
[Fri Jun 15 04:09:43 2012] Failed to get F(0.3-8.0) from xmm0021140501/analysis//spectral/fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 04:09:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:09:43 2012] Using Nh = 1.5e+12, photon index=-0.32, rate=1.22, arf fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src9.arf
[Fri Jun 15 04:09:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:09:43 2012] Updating source flux to 3.3e-11