[Thu Jun 14 14:06:36 2012] Detection parameters:
  Position = (319.3, 134.5) = 17 32 58.93 43 34 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.7 +/- 11.8
  Background counts = 33.0
  Rate = 0.03 +/- 0.008

[Thu Jun 14 14:06:37 2012] Off-axis axis estimate = 11.98'
[Thu Jun 14 14:08:44 2012] Using EEF radius (= 12.42 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:08:44 2012] Initial guess for spatial extent in simple fitting = 12.42"
[Thu Jun 14 14:08:44 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.088
[Thu Jun 14 14:08:44 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 12.42"
[Thu Jun 14 19:46:36 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src87.ximg exists
[Thu Jun 14 19:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src87.csv
[Thu Jun 14 19:46:36 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src87_1.ximg exists
[Thu Jun 14 19:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src87.csv
[Thu Jun 14 19:46:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:46:39 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Thu Jun 14 19:46:39 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Thu Jun 14 19:46:39 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Thu Jun 14 20:07:43 2012] Source 87 is offset by 6.022809 and 0.761867 pixels which is larger than
2 X fitted extent = 2.200878 x 2.200878, not incorporating fit results
[Thu Jun 14 20:07:43 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:07:43 2012] Assessing source extent using major
[Thu Jun 14 20:07:43 2012] Source does appear to be extended
[Thu Jun 14 20:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:07:43 2012] Source is confused with source 40
[Thu Jun 14 20:07:54 2012] Using EEF radius (= 12.42 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:07:54 2012] Initial guess for spatial extent in simple fitting = 12.42"
[Thu Jun 14 20:07:54 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.088
[Thu Jun 14 20:07:54 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 12.42"
[Fri Jun 15 01:34:07 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src72.ximg exists
[Fri Jun 15 01:34:07 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src72_1.ximg exists
[Fri Jun 15 01:34:07 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src72 appears to have run properly
[Fri Jun 15 01:34:09 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Fri Jun 15 01:34:10 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Fri Jun 15 01:34:10 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Fri Jun 15 01:47:22 2012] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 87 at 12.395166 pixels away
[Fri Jun 15 01:47:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 01:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 01:47:22 2012] Assessing source extent using major
[Fri Jun 15 01:47:22 2012] Source does appear to be extended
[Fri Jun 15 01:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 01:47:37 2012] XMMSAS src. selection expression = ellipse(27731.334381, 11648.834259, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 01:47:37 2012] Writing source region out to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src87_src.reg
[Fri Jun 15 01:47:37 2012] Extracting stamp from image fullrun_pn_xmm0021140501_pi300-10000_cl_sm2.00.img.gz, (282, 97) - (357, 172)
[Fri Jun 15 01:47:37 2012] XMMSAS bgd. selection expression = annulus(27731.334381, 11648.834259, 1087.500000, 2175.000000, X, Y) && !ellipse(27854.939270, 11188.785385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30441.540497, 11295.333038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.229950, 10909.734505, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 01:47:37 2012] Writing fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src87.gif
[Fri Jun 15 02:33:18 2012] Mean detx,y = (9835.62, 10878.02) 
[Fri Jun 15 02:33:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 02:33:44 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 02:33:45 2012] Setting source spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Fri Jun 15 02:33:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Fri Jun 15 03:42:18 2012] Not generating rmf since there are only 47 counts
[Fri Jun 15 03:42:18 2012] rmf not generated due to insufficient counts
[Fri Jun 15 04:03:53 2012] Updating aperture counts using extracted products
[Fri Jun 15 04:03:53 2012] Error reading totcts from fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Fri Jun 15 04:03:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:03:54 2012] Using photon index=1.80, rate=0.0319, arf fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src87.arf
[Fri Jun 15 04:03:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:03:54 2012] Updating source flux to 1.8e-13
[Fri Jun 15 04:04:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting