[Thu Jun 14 14:06:36 2012] Detection parameters:
  Position = (375.3, 256.1) = 17 32 36.46 43 42 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.1 +/- 12.8
  Background counts = 37.7
  Rate = 0.05 +/- 0.01

[Thu Jun 14 14:06:37 2012] Off-axis axis estimate = 6.36'
[Thu Jun 14 14:08:44 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:08:44 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Thu Jun 14 14:08:44 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Thu Jun 14 14:08:44 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 9.61"
[Thu Jun 14 19:46:36 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src80.ximg exists
[Thu Jun 14 19:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src80.csv
[Thu Jun 14 19:46:36 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src80_1.ximg exists
[Thu Jun 14 19:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src80.csv
[Thu Jun 14 19:46:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:46:39 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Thu Jun 14 19:46:39 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Thu Jun 14 19:46:39 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Thu Jun 14 20:07:43 2012] Source 80 is offset by 8.000706 and -2.129543 pixels which is larger than
2 X fitted extent = 1.090359 x 1.090359, not incorporating fit results
[Thu Jun 14 20:07:43 2012] Spatial fit model total counts = 498.333000, observed total counts = 479.000000
[Thu Jun 14 20:07:43 2012] Offset between fit and detection position for source 80 = 0.221191 pixels
[Thu Jun 14 20:07:43 2012] 492.269200 total counts/ 476.015000 bgd. counts: snr = 0.744998
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.221191 pixels
  Position = (375.1, 256.1) = 17 32 36.54 43 42 51.4
  Extent = 4.0 (2.4-7.4)", rotation angle = 0
  Source counts = 16.3 +/- 22.2
  Background counts = 476.0
  Rate = 0.04 +/- 0.05
  Deleting source due to low Poisson probability