[Thu Jun 14 14:06:36 2012] Detection parameters:
  Position = (332.8, 292.1) = 17 32 53.49 43 45 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.2 +/- 15.7
  Background counts = 56.4
  Rate = 0.06 +/- 0.01

[Thu Jun 14 14:06:37 2012] Off-axis axis estimate = 2.53'
[Thu Jun 14 14:08:44 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:08:44 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Thu Jun 14 14:08:44 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.777
[Thu Jun 14 14:08:44 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 7.70"
[Thu Jun 14 19:46:36 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src79.ximg exists
[Thu Jun 14 19:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src79.csv
[Thu Jun 14 19:46:36 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src79_1.ximg exists
[Thu Jun 14 19:46:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src79.csv
[Thu Jun 14 19:46:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:46:39 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Thu Jun 14 19:46:39 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Thu Jun 14 19:46:39 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Thu Jun 14 20:07:43 2012] Spatial fit model total counts = 659.997000, observed total counts = 649.000000
[Thu Jun 14 20:07:43 2012] Offset between fit and detection position for source 79 = 6.101421 pixels
[Thu Jun 14 20:07:43 2012] 674.592000 total counts/ 556.994000 bgd. counts: snr = 4.982814
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 6.101421 pixels
  Position = (327.1, 289.8) = 17 32 55.76 43 45 18.5
  Extent = 15.4 (15.4-30.8)", rotation angle = 0
  Source counts = 117.6 +/- 26.0
  Background counts = 557.0
  Rate = 0.3 +/- 0.06
[Thu Jun 14 20:07:43 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:07:43 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 20:07:43 2012] Source does appear to be extended
[Thu Jun 14 20:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:07:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:07:54 2012] Initial guess for spatial extent in simple fitting = 15.39"
[Thu Jun 14 20:07:54 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.981
[Thu Jun 14 20:07:54 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 15.39"
[Fri Jun 15 01:34:07 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src66.ximg exists
[Fri Jun 15 01:34:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src66.csv
[Fri Jun 15 01:34:07 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src66_1.ximg exists
[Fri Jun 15 01:34:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src66.csv
[Fri Jun 15 01:34:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 01:34:09 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Fri Jun 15 01:34:09 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Fri Jun 15 01:34:09 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src66 appears to have run properly
[Fri Jun 15 01:47:22 2012] Warning, spatial fit 66 centroid is now closest to src. 77
[Fri Jun 15 01:47:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 01:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 01:47:22 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 01:47:22 2012] Source does appear to be extended
[Fri Jun 15 01:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 01:47:37 2012] XMMSAS src. selection expression = ellipse(28413.254000, 25165.882000, 923.460027, 923.460027, 0.000000, X, Y)
[Fri Jun 15 01:47:37 2012] Writing source region out to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src79_src.reg
[Fri Jun 15 01:47:37 2012] Extracting stamp from image fullrun_pn_xmm0021140501_pi300-10000_cl_sm2.00.img.gz, (274, 237) - (380, 343)
[Fri Jun 15 01:47:37 2012] XMMSAS bgd. selection expression = annulus(28413.254000, 25165.882000, 1539.100044, 3078.200089, X, Y) && !ellipse(25725.887207, 28991.557312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25791.591217, 28485.612274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25075.009430, 28455.692749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24758.893677, 28046.300507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.326050, 27604.604523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26260.557007, 27099.840973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.619324, 27739.525146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28056.509600, 27046.551200, 572.163216, 572.163216, 0.000000, X, Y) && !ellipse(27138.625641, 26908.928436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27641.193481, 26580.026062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29231.314423, 25956.888031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27475.572754, 25607.610962, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 01:47:37 2012] Writing fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src79.gif
[Fri Jun 15 02:30:43 2012] Mean detx,y = (1267.23, 398.68) 
[Fri Jun 15 02:30:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 02:31:06 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 02:31:06 2012] Setting source spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Fri Jun 15 02:31:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Fri Jun 15 04:03:53 2012] Updating aperture counts using extracted products
[Fri Jun 15 04:03:53 2012] Error reading totcts from fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Fri Jun 15 04:03:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:03:54 2012] Using photon index=1.80, rate=0.257, arf fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src79.arf
[Fri Jun 15 04:03:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:03:54 2012] Updating source flux to 5.7e-13