[Thu Jun 14 14:06:35 2012] Detection parameters:
  Position = (170.1, 431.5) = 17 33 58.96 43 55 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.9 +/- 15.7
  Background counts = 46.5
  Rate = 0.04 +/- 0.01

[Thu Jun 14 14:06:37 2012] Off-axis axis estimate = 13.40'
[Thu Jun 14 14:08:44 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:08:44 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Thu Jun 14 14:08:44 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Thu Jun 14 14:08:44 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 13.13"
[Thu Jun 14 19:46:34 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jun 14 19:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src7.csv
[Thu Jun 14 19:46:34 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jun 14 19:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src7.csv
[Thu Jun 14 19:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:46:37 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jun 14 19:46:37 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jun 14 19:46:37 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Jun 14 20:07:43 2012] Warning, spatial fit 7 centroid is now closest to src. 1
[Thu Jun 14 20:07:43 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:07:43 2012] Assessing source extent using major
[Thu Jun 14 20:07:43 2012] Source does appear to be extended
[Thu Jun 14 20:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:07:43 2012] Source is confused with source 5
[Thu Jun 14 20:07:54 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:07:54 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Thu Jun 14 20:07:54 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Thu Jun 14 20:07:54 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 13.13"
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun 15 01:34:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src7.csv
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun 15 01:34:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src7.csv
[Fri Jun 15 01:34:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 01:34:08 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun 15 01:34:08 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun 15 01:34:08 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jun 15 01:47:22 2012] Source 7 is offset by 6.120034 and 7.492562 pixels which is larger than
2 X fitted extent = 1.502630 x 1.502630, not incorporating fit results
[Fri Jun 15 01:47:22 2012] Warning, spatial fit 7 centroid is now closest to src. 1
[Fri Jun 15 01:47:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 01:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 01:47:22 2012] Assessing source extent using major
[Fri Jun 15 01:47:22 2012] Source does appear to be extended
[Fri Jun 15 01:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 01:47:35 2012] XMMSAS src. selection expression = ellipse(14750.112915, 37489.522858, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 01:47:35 2012] Writing source region out to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src7_src.reg
[Fri Jun 15 01:47:35 2012] Extracting stamp from image fullrun_pn_xmm0021140501_pi300-10000_cl_sm2.00.img.gz, (133, 394) - (208, 469)
[Fri Jun 15 01:47:35 2012] XMMSAS bgd. selection expression = annulus(14750.112915, 37489.522858, 1087.500000, 2175.000000, X, Y) && !ellipse(16219.466000, 37047.044000, 3769.024108, 3769.024108, 0.000000, X, Y) && !ellipse(14710.911407, 38316.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15757.288986, 37956.855804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15235.820000, 38433.884000, 2078.824060, 2078.824060, 0.000000, X, Y) && !ellipse(15283.415375, 37800.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14309.932953, 37711.520477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15413.544998, 37286.811371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16610.514000, 37068.428000, 2045.128059, 2045.128059, 0.000000, X, Y) && !ellipse(17118.250000, 36634.262000, 1982.832057, 1982.832057, 0.000000, X, Y) && !ellipse(16988.168000, 35932.092000, 1884.512054, 1884.512054, 0.000000, X, Y) && !ellipse(17535.098000, 35972.968000, 4090.104118, 4090.104118, 0.000000, X, Y) && !ellipse(17428.063080, 35549.163727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18022.154000, 35668.062000, 3433.088099, 3433.088099, 0.000000, X, Y)
[Fri Jun 15 01:47:35 2012] Writing fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src7.gif
[Fri Jun 15 01:56:31 2012] Mean detx,y = (-17095.43, 356.98) 
[Fri Jun 15 01:56:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 01:56:44 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 01:56:44 2012] Setting source spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun 15 01:56:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jun 15 02:55:19 2012] Not generating rmf since there are only 64 counts
[Fri Jun 15 02:55:19 2012] rmf not generated due to insufficient counts
[Fri Jun 15 04:03:52 2012] Updating aperture counts using extracted products
[Fri Jun 15 04:03:52 2012] Error reading totcts from fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun 15 04:03:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:03:53 2012] Using photon index=1.80, rate=0.0435, arf fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src7.arf
[Fri Jun 15 04:03:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:03:53 2012] Updating source flux to 3.7e-13
[Fri Jun 15 04:04:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 15 04:09:43 2012] xmm0021140501/analysis//spectral/fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete