[Thu Jun 14 14:06:36 2012] Detection parameters:
  Position = (172.7, 324.3) = 17 33 57.80 43 47 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.6 +/- 16.0
  Background counts = 64.5
  Rate = 0.04 +/- 0.01

[Thu Jun 14 14:06:37 2012] Off-axis axis estimate = 9.30'
[Thu Jun 14 14:08:44 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:08:44 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Thu Jun 14 14:08:44 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.969
[Thu Jun 14 14:08:44 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 11.08"
[Thu Jun 14 19:46:36 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src64.ximg exists
[Thu Jun 14 19:46:36 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src64_1.ximg exists
[Thu Jun 14 19:46:36 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src64 appears to have run properly
[Thu Jun 14 19:46:39 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Thu Jun 14 19:46:39 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Thu Jun 14 19:46:39 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Thu Jun 14 20:07:43 2012] Source 64 is offset by 3.122588 and -6.451424 pixels which is larger than
2 X fitted extent = 1.328740 x 1.328740, not incorporating fit results
[Thu Jun 14 20:07:43 2012] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 11.083046 pixels away
[Thu Jun 14 20:07:43 2012] Source 64 is offset by -6.273964 and 4.384990 pixels which is larger than
2 X fitted extent = 1.273655 x 2.962304, not incorporating fit results
[Thu Jun 14 20:07:43 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:07:43 2012] Assessing source extent using major
[Thu Jun 14 20:07:43 2012] Source does appear to be extended
[Thu Jun 14 20:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:07:54 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:07:54 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Thu Jun 14 20:07:54 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.969
[Thu Jun 14 20:07:54 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 11.08"
[Fri Jun 15 01:34:07 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src55.ximg exists
[Fri Jun 15 01:34:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src55.csv
[Fri Jun 15 01:34:07 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src55_1.ximg exists
[Fri Jun 15 01:34:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src55.csv
[Fri Jun 15 01:34:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 01:34:09 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Fri Jun 15 01:34:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src55.csv
[Fri Jun 15 01:34:09 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Fri Jun 15 01:34:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src55.csv
[Fri Jun 15 01:34:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 01:47:22 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 14.101066 pixels away
[Fri Jun 15 01:47:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 01:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 01:47:22 2012] Assessing source extent using major
[Fri Jun 15 01:47:22 2012] Source does appear to be extended
[Fri Jun 15 01:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 01:47:37 2012] XMMSAS src. selection expression = ellipse(14978.509155, 28162.280151, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 01:47:37 2012] Writing source region out to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src64_src.reg
[Fri Jun 15 01:47:37 2012] Extracting stamp from image fullrun_pn_xmm0021140501_pi300-10000_cl_sm2.00.img.gz, (135, 287) - (210, 362)
[Fri Jun 15 01:47:37 2012] XMMSAS bgd. selection expression = annulus(14978.509155, 28162.280151, 1087.500000, 2175.000000, X, Y) && !ellipse(13368.916229, 29359.122223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12106.165710, 29323.157196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13859.784683, 28418.702881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13212.395615, 28357.260193, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 01:47:37 2012] Writing fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src64.gif
[Fri Jun 15 02:27:09 2012] Mean detx,y = (-10689.27, 7144.26) 
[Fri Jun 15 02:27:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 02:27:24 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 02:27:24 2012] Setting source spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Fri Jun 15 02:27:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Fri Jun 15 03:26:25 2012] Not generating rmf since there are only 64 counts
[Fri Jun 15 03:26:25 2012] rmf not generated due to insufficient counts
[Fri Jun 15 04:03:52 2012] Updating aperture counts using extracted products
[Fri Jun 15 04:03:52 2012] Error reading totcts from fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Fri Jun 15 04:03:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:03:53 2012] Using photon index=1.80, rate=0.0433, arf fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src64.arf
[Fri Jun 15 04:03:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:03:53 2012] Updating source flux to 2.5e-13
[Fri Jun 15 04:04:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting