[Thu Jun 14 14:06:36 2012] Detection parameters:
  Position = (288.8, 327.6) = 17 33 11.17 43 48 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.2 +/- 15.2
  Background counts = 49.8
  Rate = 0.08 +/- 0.01

[Thu Jun 14 14:06:37 2012] Off-axis axis estimate = 2.23'
[Thu Jun 14 14:08:44 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:08:44 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Thu Jun 14 14:08:44 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.002
[Thu Jun 14 14:08:44 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 7.54"
[Thu Jun 14 19:46:36 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src63.ximg exists
[Thu Jun 14 19:46:36 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src63_1.ximg exists
[Thu Jun 14 19:46:36 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src63 appears to have run properly
[Thu Jun 14 19:46:39 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Thu Jun 14 19:46:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src63.csv
[Thu Jun 14 19:46:39 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Thu Jun 14 19:46:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src63.csv
[Thu Jun 14 19:46:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:07:43 2012] Warning, spatial fit 63 centroid is now closest to src. 68
[Thu Jun 14 20:07:43 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:07:43 2012] Assessing source extent using major
[Thu Jun 14 20:07:43 2012] Source does appear to be extended
[Thu Jun 14 20:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:07:43 2012] Source is confused with source 65
[Thu Jun 14 20:07:54 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:07:54 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Thu Jun 14 20:07:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.002
[Thu Jun 14 20:07:54 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 7.54"
[Fri Jun 15 01:34:07 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src54.ximg exists
[Fri Jun 15 01:34:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src54.csv
[Fri Jun 15 01:34:07 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src54_1.ximg exists
[Fri Jun 15 01:34:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src54.csv
[Fri Jun 15 01:34:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 01:34:09 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Fri Jun 15 01:34:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src54.csv
[Fri Jun 15 01:34:09 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Fri Jun 15 01:34:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src54.csv
[Fri Jun 15 01:34:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 01:47:22 2012] Source 63 is offset by 1.534775 and -0.124405 pixels which is larger than
2 X fitted extent = 0.905149 x 0.905149, not incorporating fit results
[Fri Jun 15 01:47:22 2012] Warning, spatial fit 54 centroid is now closest to src. 61
[Fri Jun 15 01:47:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 01:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 01:47:22 2012] Assessing source extent using major
[Fri Jun 15 01:47:22 2012] Source does appear to be extended
[Fri Jun 15 01:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 01:47:37 2012] XMMSAS src. selection expression = ellipse(25075.009430, 28455.692749, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 01:47:37 2012] Writing source region out to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src63_src.reg
[Fri Jun 15 01:47:37 2012] Extracting stamp from image fullrun_pn_xmm0021140501_pi300-10000_cl_sm2.00.img.gz, (251, 290) - (326, 365)
[Fri Jun 15 01:47:37 2012] XMMSAS bgd. selection expression = annulus(25075.009430, 28455.692749, 1087.500000, 2175.000000, X, Y) && !ellipse(22797.177490, 31441.626312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23520.057007, 30837.094727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23171.510071, 31187.014313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24251.548000, 30412.044000, 1364.216039, 657.926419, 217.755000, X, Y) && !ellipse(22681.622000, 30188.710000, 1011.488029, 1011.488029, 0.000000, X, Y) && !ellipse(24042.160000, 30643.740000, 1332.680038, 1332.680038, 0.000000, X, Y) && !ellipse(24500.158600, 30307.071600, 666.340819, 666.340819, 0.000000, X, Y) && !ellipse(23382.953949, 29648.618652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24962.401672, 29617.655701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24497.434357, 29619.304474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23628.530884, 29268.970703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25725.887207, 28991.557312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.468658, 29005.448425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25791.591217, 28485.612274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24758.893677, 28046.300507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.326050, 27604.604523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26260.557007, 27099.840973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.619324, 27739.525146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.625641, 26908.928436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27641.193481, 26580.026062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27475.572754, 25607.610962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28413.254000, 25165.882000, 1231.280035, 1231.280035, 0.000000, X, Y)
[Fri Jun 15 01:47:37 2012] Writing fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src63.gif
[Fri Jun 15 02:26:44 2012] Mean detx,y = (-3283.16, 168.34) 
[Fri Jun 15 02:26:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 02:27:04 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 02:27:04 2012] Setting source spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri Jun 15 02:27:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Fri Jun 15 03:26:20 2012] Not generating rmf since there are only 85 counts
[Fri Jun 15 03:26:20 2012] rmf not generated due to insufficient counts
[Fri Jun 15 04:03:52 2012] Updating aperture counts using extracted products
[Fri Jun 15 04:03:52 2012] Error reading totcts from fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri Jun 15 04:03:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:03:53 2012] Using photon index=1.80, rate=0.0802, arf fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src63.arf
[Fri Jun 15 04:03:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:03:53 2012] Updating source flux to 2.6e-13
[Fri Jun 15 04:04:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting