[Thu Jun 14 14:06:35 2012] Detection parameters:
  Position = (276.2, 351.9) = 17 33 16.22 43 49 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.9 +/- 16.3
  Background counts = 35.8
  Rate = 0.1 +/- 0.02

[Thu Jun 14 14:06:37 2012] Off-axis axis estimate = 4.20'
[Thu Jun 14 14:08:44 2012] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:08:44 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Thu Jun 14 14:08:44 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.033
[Thu Jun 14 14:08:44 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 8.53"
[Thu Jun 14 19:46:35 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src47.ximg exists
[Thu Jun 14 19:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src47.csv
[Thu Jun 14 19:46:35 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src47_1.ximg exists
[Thu Jun 14 19:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src47.csv
[Thu Jun 14 19:46:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:46:38 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Thu Jun 14 19:46:38 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Thu Jun 14 19:46:38 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Thu Jun 14 20:07:43 2012] Spatial fit model total counts = 809.052000, observed total counts = 707.000000
[Thu Jun 14 20:07:43 2012] Poor agreement between spatial fit and data for source 47
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 20:07:43 2012] Spatial fit model total counts = 833.259000, observed total counts = 611.000000
[Thu Jun 14 20:07:43 2012] Poor agreement between spatial fit and data for source 47
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 20:07:43 2012] Warning, spatial fit 47 centroid is now closest to src. 52
[Thu Jun 14 20:07:43 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:07:43 2012] Assessing source extent using major
[Thu Jun 14 20:07:43 2012] Source does appear to be extended
[Thu Jun 14 20:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:07:43 2012] Source is confused with source 44
[Thu Jun 14 20:07:54 2012] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:07:54 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Thu Jun 14 20:07:54 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.033
[Thu Jun 14 20:07:54 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 8.53"
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src42.ximg exists
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src42_1.ximg exists
[Fri Jun 15 01:34:06 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src42 appears to have run properly
[Fri Jun 15 01:34:09 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Fri Jun 15 01:34:09 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Fri Jun 15 01:34:09 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Fri Jun 15 01:47:22 2012] Spatial fit model total counts = 818.462000, observed total counts = 707.000000
[Fri Jun 15 01:47:22 2012] Poor agreement between spatial fit and data for source 47
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 01:47:22 2012] Spatial fit model total counts = 695.275000, observed total counts = 675.000000
[Fri Jun 15 01:47:22 2012] Offset between fit and detection position for source 47 = 3.552012 pixels
[Fri Jun 15 01:47:22 2012] 637.747000 total counts/ 495.162000 bgd. counts: snr = 6.407671
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 3.552012 pixels
  Position = (279.3, 350.1) = 17 33 14.98 43 49 40.8
  Extent = 17.1 (17.0-34.1)" x 8.2 (4.9-11.4)", rotation angle = 218 (203-232) degrees
  Source counts = 142.6 +/- 25.3
  Background counts = 495.2
  Rate = 0.3 +/- 0.06
[Fri Jun 15 01:47:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 01:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 01:47:22 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 01:47:22 2012] Source does appear to be extended
[Fri Jun 15 01:47:22 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.50
[Fri Jun 15 01:47:36 2012] XMMSAS src. selection expression = ellipse(24251.548000, 30412.044000, 1023.162029, 493.444814, 217.755000, X, Y)
[Fri Jun 15 01:47:36 2012] Writing source region out to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src47_src.reg
[Fri Jun 15 01:47:36 2012] Extracting stamp from image fullrun_pn_xmm0021140501_pi300-10000_cl_sm2.00.img.gz, (221, 291) - (338, 409)
[Fri Jun 15 01:47:36 2012] XMMSAS bgd. selection expression = annulus(24251.548000, 30412.044000, 1705.270049, 3410.540098, X, Y) && !ellipse(17535.098000, 35972.968000, 4090.104118, 4090.104118, 0.000000, X, Y) && !ellipse(19332.072000, 34699.554000, 1716.544049, 1716.544049, 0.000000, X, Y) && !ellipse(19984.578000, 34216.166000, 1664.056048, 1239.072036, 219.534000, X, Y) && !ellipse(18022.154000, 35668.062000, 3433.088099, 3433.088099, 0.000000, X, Y) && !ellipse(20822.644150, 33100.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20873.976486, 32579.144409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20185.571198, 33011.404419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20432.600433, 32305.710907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22797.177490, 31441.626312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21514.589920, 31461.621338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20553.278152, 31235.388947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23520.057007, 30837.094727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23171.510071, 31187.014313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21588.752853, 30490.507202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22681.622000, 30188.710000, 1011.488029, 1011.488029, 0.000000, X, Y) && !ellipse(24042.160000, 30643.740000, 1332.680038, 1332.680038, 0.000000, X, Y) && !ellipse(24500.158600, 30307.071600, 666.340819, 666.340819, 0.000000, X, Y) && !ellipse(23382.953949, 29648.618652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24962.401672, 29617.655701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24497.434357, 29619.304474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23628.530884, 29268.970703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25725.887207, 28991.557312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.468658, 29005.448425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25791.591217, 28485.612274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25075.009430, 28455.692749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24758.893677, 28046.300507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.326050, 27604.604523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26260.557007, 27099.840973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.619324, 27739.525146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28056.509600, 27046.551200, 572.163216, 572.163216, 0.000000, X, Y) && !ellipse(27138.625641, 26908.928436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27641.193481, 26580.026062, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 01:47:36 2012] Writing fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src47.gif
[Fri Jun 15 02:22:23 2012] Mean detx,y = (-5365.44, -443.28) 
[Fri Jun 15 02:22:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 02:22:53 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 02:22:53 2012] Setting source spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Fri Jun 15 02:22:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Fri Jun 15 04:03:52 2012] Updating aperture counts using extracted products
[Fri Jun 15 04:03:52 2012] Error reading totcts from fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Fri Jun 15 04:03:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:03:53 2012] Using photon index=1.80, rate=0.311, arf fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src47.arf
[Fri Jun 15 04:03:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:03:53 2012] Updating source flux to 1.2e-12
[Fri Jun 15 04:04:06 2012] Flag p found in src. 47 procflags, skipping spectral fitting
[Fri Jun 15 04:04:06 2012] Flag c found in src. 47 procflags, skipping spectral fitting