[Thu Jun 14 14:06:35 2012] Detection parameters:
  Position = (266.9, 359.0) = 17 33 19.97 43 50 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.7 +/- 16.5
  Background counts = 34.6
  Rate = 0.1 +/- 0.02

[Thu Jun 14 14:06:37 2012] Off-axis axis estimate = 4.95'
[Thu Jun 14 14:08:44 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:08:44 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Thu Jun 14 14:08:44 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.156
[Thu Jun 14 14:08:44 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 8.90"
[Thu Jun 14 19:46:35 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src45.ximg exists
[Thu Jun 14 19:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src45.csv
[Thu Jun 14 19:46:35 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu Jun 14 19:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src45.csv
[Thu Jun 14 19:46:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:46:38 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu Jun 14 19:46:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu Jun 14 19:46:38 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu Jun 14 19:46:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu Jun 14 19:46:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:07:43 2012] Spatial fit model total counts = 765.318000, observed total counts = 608.000000
[Thu Jun 14 20:07:43 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 20:07:43 2012] Warning, spatial fit 45 centroid is now closest to src. 47
[Thu Jun 14 20:07:43 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:07:43 2012] Assessing source extent using major
[Thu Jun 14 20:07:43 2012] Source does appear to be extended
[Thu Jun 14 20:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:07:43 2012] Source is confused with source 38
[Thu Jun 14 20:07:54 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:07:54 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Thu Jun 14 20:07:54 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.156
[Thu Jun 14 20:07:54 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 8.90"
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src40.ximg exists
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri Jun 15 01:34:06 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src40 appears to have run properly
[Fri Jun 15 01:34:09 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri Jun 15 01:34:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri Jun 15 01:34:09 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri Jun 15 01:34:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri Jun 15 01:34:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 01:47:22 2012] Spatial fit model total counts = 760.594000, observed total counts = 608.000000
[Fri Jun 15 01:47:22 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 01:47:22 2012] Warning, spatial fit 40 centroid is now closest to src. 44
[Fri Jun 15 01:47:22 2012] Source 45 is offset by 3.243385 and 0.368965 pixels which is larger than
2 X fitted extent = 2.461463 x 1.263879, not incorporating fit results
[Fri Jun 15 01:47:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 01:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 01:47:22 2012] Assessing source extent using major
[Fri Jun 15 01:47:22 2012] Source does appear to be extended
[Fri Jun 15 01:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 01:47:36 2012] XMMSAS src. selection expression = ellipse(23171.510071, 31187.014313, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 01:47:36 2012] Writing source region out to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src45_src.reg
[Fri Jun 15 01:47:36 2012] Extracting stamp from image fullrun_pn_xmm0021140501_pi300-10000_cl_sm2.00.img.gz, (229, 322) - (304, 397)
[Fri Jun 15 01:47:36 2012] XMMSAS bgd. selection expression = annulus(23171.510071, 31187.014313, 1087.500000, 2175.000000, X, Y) && !ellipse(17535.098000, 35972.968000, 4090.104118, 4090.104118, 0.000000, X, Y) && !ellipse(19332.072000, 34699.554000, 1716.544049, 1716.544049, 0.000000, X, Y) && !ellipse(19984.578000, 34216.166000, 1664.056048, 1239.072036, 219.534000, X, Y) && !ellipse(18022.154000, 35668.062000, 3433.088099, 3433.088099, 0.000000, X, Y) && !ellipse(20822.644150, 33100.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20873.976486, 32579.144409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20185.571198, 33011.404419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20432.600433, 32305.710907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22797.177490, 31441.626312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21514.589920, 31461.621338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20553.278152, 31235.388947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23520.057007, 30837.094727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21588.752853, 30490.507202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24251.548000, 30412.044000, 1364.216039, 657.926419, 217.755000, X, Y) && !ellipse(22681.622000, 30188.710000, 1011.488029, 1011.488029, 0.000000, X, Y) && !ellipse(24042.160000, 30643.740000, 1332.680038, 1332.680038, 0.000000, X, Y) && !ellipse(24500.158600, 30307.071600, 666.340819, 666.340819, 0.000000, X, Y) && !ellipse(23382.953949, 29648.618652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24962.401672, 29617.655701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24497.434357, 29619.304474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23628.530884, 29268.970703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25725.887207, 28991.557312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.468658, 29005.448425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25791.591217, 28485.612274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25075.009430, 28455.692749, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 01:47:36 2012] Writing fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src45.gif
[Fri Jun 15 02:21:29 2012] Mean detx,y = (-6631.70, -510.73) 
[Fri Jun 15 02:21:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 02:21:50 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 02:21:50 2012] Setting source spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Fri Jun 15 02:21:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Fri Jun 15 03:20:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 03:20:04 2012] rmf not generated due to insufficient counts
[Fri Jun 15 04:03:52 2012] Updating aperture counts using extracted products
[Fri Jun 15 04:03:52 2012] Error reading totcts from fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Fri Jun 15 04:03:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:03:53 2012] Using photon index=1.80, rate=0.14, arf fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src45.arf
[Fri Jun 15 04:03:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:03:53 2012] Updating source flux to 5.3e-13
[Fri Jun 15 04:04:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting