[Thu Jun 14 14:06:35 2012] Detection parameters:
  Position = (239.9, 381.0) = 17 33 30.83 43 51 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.1 +/- 15.7
  Background counts = 34.0
  Rate = 0.07 +/- 0.01

[Thu Jun 14 14:06:37 2012] Off-axis axis estimate = 7.34'
[Thu Jun 14 14:08:44 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:08:44 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Thu Jun 14 14:08:44 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Thu Jun 14 14:08:44 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.10"
[Thu Jun 14 19:46:35 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src33.ximg exists
[Thu Jun 14 19:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src33.csv
[Thu Jun 14 19:46:35 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Jun 14 19:46:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src33.csv
[Thu Jun 14 19:46:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:46:38 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Jun 14 19:46:38 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Jun 14 19:46:38 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu Jun 14 20:07:43 2012] Warning, spatial fit 33 centroid is now closest to src. 18
[Thu Jun 14 20:07:43 2012] Source 33 is offset by -1.507584 and -9.384858 pixels which is larger than
2 X fitted extent = 1.175724 x 1.175724, not incorporating fit results
[Thu Jun 14 20:07:43 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:07:43 2012] Assessing source extent using major
[Thu Jun 14 20:07:43 2012] Source does appear to be extended
[Thu Jun 14 20:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:07:43 2012] Source is confused with source 18
[Thu Jun 14 20:07:54 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:07:54 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Thu Jun 14 20:07:54 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Thu Jun 14 20:07:54 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 10.10"
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src28.ximg exists
[Fri Jun 15 01:34:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src28.csv
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Jun 15 01:34:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src28.csv
[Fri Jun 15 01:34:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 01:34:08 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Jun 15 01:34:08 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Jun 15 01:34:08 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Jun 15 01:47:22 2012] Warning, spatial fit 28 centroid is now closest to src. 18
[Fri Jun 15 01:47:22 2012] Source 33 is offset by -1.507584 and -9.384858 pixels which is larger than
2 X fitted extent = 1.175724 x 1.175724, not incorporating fit results
[Fri Jun 15 01:47:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 01:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 01:47:22 2012] Assessing source extent using major
[Fri Jun 15 01:47:22 2012] Source does appear to be extended
[Fri Jun 15 01:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 01:47:35 2012] XMMSAS src. selection expression = ellipse(20822.644150, 33100.321350, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 01:47:35 2012] Writing source region out to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src33_src.reg
[Fri Jun 15 01:47:35 2012] Extracting stamp from image fullrun_pn_xmm0021140501_pi300-10000_cl_sm2.00.img.gz, (202, 344) - (277, 419)
[Fri Jun 15 01:47:35 2012] XMMSAS bgd. selection expression = annulus(20822.644150, 33100.321350, 1087.500000, 2175.000000, X, Y) && !ellipse(16219.466000, 37047.044000, 3769.024108, 3769.024108, 0.000000, X, Y) && !ellipse(16610.514000, 37068.428000, 2045.128059, 2045.128059, 0.000000, X, Y) && !ellipse(17118.250000, 36634.262000, 1982.832057, 1982.832057, 0.000000, X, Y) && !ellipse(16988.168000, 35932.092000, 1884.512054, 1884.512054, 0.000000, X, Y) && !ellipse(17535.098000, 35972.968000, 4090.104118, 4090.104118, 0.000000, X, Y) && !ellipse(19332.072000, 34699.554000, 1716.544049, 1716.544049, 0.000000, X, Y) && !ellipse(19984.578000, 34216.166000, 1664.056048, 1239.072036, 219.534000, X, Y) && !ellipse(18022.154000, 35668.062000, 3433.088099, 3433.088099, 0.000000, X, Y) && !ellipse(18205.606995, 34031.641907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19879.518005, 33539.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19450.748032, 32841.163940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20873.976486, 32579.144409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20185.571198, 33011.404419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20432.600433, 32305.710907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22797.177490, 31441.626312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21514.589920, 31461.621338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20553.278152, 31235.388947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23520.057007, 30837.094727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23171.510071, 31187.014313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21588.752853, 30490.507202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24251.548000, 30412.044000, 1364.216039, 657.926419, 217.755000, X, Y) && !ellipse(22681.622000, 30188.710000, 1011.488029, 1011.488029, 0.000000, X, Y) && !ellipse(24042.160000, 30643.740000, 1332.680038, 1332.680038, 0.000000, X, Y)
[Fri Jun 15 01:47:35 2012] Writing fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src33.gif
[Fri Jun 15 02:16:51 2012] Mean detx,y = (-9652.12, -415.13) 
[Fri Jun 15 02:16:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 02:17:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 02:17:11 2012] Setting source spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Jun 15 02:17:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Jun 15 03:18:34 2012] Not generating rmf since there are only 99 counts
[Fri Jun 15 03:18:34 2012] rmf not generated due to insufficient counts
[Fri Jun 15 04:03:52 2012] Updating aperture counts using extracted products
[Fri Jun 15 04:03:52 2012] Error reading totcts from fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Jun 15 04:03:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:03:53 2012] Using photon index=1.80, rate=0.0664, arf fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src33.arf
[Fri Jun 15 04:03:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:03:53 2012] Updating source flux to 3.1e-13
[Fri Jun 15 04:04:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting