[Thu Jun 14 14:06:35 2012] Detection parameters:
  Position = (218.5, 403.0) = 17 33 39.45 43 53 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.8 +/- 14.4
  Background counts = 34.3
  Rate = 0.06 +/- 0.01

[Thu Jun 14 14:06:37 2012] Off-axis axis estimate = 9.54'
[Thu Jun 14 14:08:44 2012] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 14:08:44 2012] Initial guess for spatial extent in simple fitting = 11.20"
[Thu Jun 14 14:08:44 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.111
[Thu Jun 14 14:08:44 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 11.20"
[Thu Jun 14 19:46:34 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jun 14 19:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src15.csv
[Thu Jun 14 19:46:34 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jun 14 19:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src15.csv
[Thu Jun 14 19:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:46:37 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jun 14 19:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 14 19:46:37 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jun 14 19:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 14 19:46:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:07:43 2012] Warning, spatial fit 15 centroid is now closest to src. 30
[Thu Jun 14 20:07:43 2012] Spatial fit model total counts = 661.546000, observed total counts = 624.000000
[Thu Jun 14 20:07:43 2012] Offset between fit and detection position for source 15 = 5.602417 pixels
[Thu Jun 14 20:07:43 2012] Warning, changing simple spatial fit ID from 15 to 17
[Thu Jun 14 20:07:43 2012] 603.894000 total counts/ 317.055000 bgd. counts: snr = 16.109086
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 5.602417 pixels
  Position = (222.8, 399.4) = 17 33 37.74 43 53 14.9
  Extent = 21.5 (21.5-42.9)", rotation angle = 0
  Source counts = 286.8 +/- 24.6
  Background counts = 317.1
  Rate = 0.6 +/- 0.05
[Thu Jun 14 20:07:43 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:07:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:07:43 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 20:07:43 2012] Source does appear to be extended
[Thu Jun 14 20:07:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:07:43 2012] Source is confused with source 17
[Thu Jun 14 20:07:43 2012] Source is confused with source 32
[Thu Jun 14 20:07:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 20:07:54 2012] Initial guess for spatial extent in simple fitting = 21.46"
[Thu Jun 14 20:07:54 2012] source mask rpix=4.9, npix_max = 118, mask sum = 109, frac = 0.923
[Thu Jun 14 20:07:54 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 21.46"
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src14.ximg exists
[Fri Jun 15 01:34:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src14.csv
[Fri Jun 15 01:34:06 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Jun 15 01:34:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src14.csv
[Fri Jun 15 01:34:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 01:34:08 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Jun 15 01:34:08 2012] fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Jun 15 01:34:08 2012] Fit fullrun_pn_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Jun 15 01:47:22 2012] Warning, spatial fit 14 centroid is now closest to src. 30
[Fri Jun 15 01:47:22 2012] Source 15 is offset by 1.088943 and 6.899448 pixels which is larger than
2 X fitted extent = 1.218538 x 1.218538, not incorporating fit results
[Fri Jun 15 01:47:22 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 01:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 01:47:22 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 01:47:22 2012] Source does appear to be extended
[Fri Jun 15 01:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 01:47:35 2012] XMMSAS src. selection expression = ellipse(19332.072000, 34699.554000, 1287.408037, 1287.408037, 0.000000, X, Y)
[Fri Jun 15 01:47:35 2012] Writing source region out to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src15_src.reg
[Fri Jun 15 01:47:35 2012] Extracting stamp from image fullrun_pn_xmm0021140501_pi300-10000_cl_sm2.00.img.gz, (149, 325) - (297, 473)
[Fri Jun 15 01:47:35 2012] XMMSAS bgd. selection expression = annulus(19332.072000, 34699.554000, 2145.680062, 4291.360123, X, Y) && !ellipse(16219.466000, 37047.044000, 3769.024108, 3769.024108, 0.000000, X, Y) && !ellipse(14710.911407, 38316.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15757.288986, 37956.855804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15235.820000, 38433.884000, 2078.824060, 2078.824060, 0.000000, X, Y) && !ellipse(15283.415375, 37800.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14309.932953, 37711.520477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14750.112915, 37489.522858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15413.544998, 37286.811371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16610.514000, 37068.428000, 2045.128059, 2045.128059, 0.000000, X, Y) && !ellipse(17118.250000, 36634.262000, 1982.832057, 1982.832057, 0.000000, X, Y) && !ellipse(16988.168000, 35932.092000, 1884.512054, 1884.512054, 0.000000, X, Y) && !ellipse(17535.098000, 35972.968000, 4090.104118, 4090.104118, 0.000000, X, Y) && !ellipse(19984.578000, 34216.166000, 1664.056048, 1239.072036, 219.534000, X, Y) && !ellipse(17428.063080, 35549.163727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18022.154000, 35668.062000, 3433.088099, 3433.088099, 0.000000, X, Y) && !ellipse(18205.606995, 34031.641907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19879.518005, 33539.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20822.644150, 33100.321350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19450.748032, 32841.163940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20873.976486, 32579.144409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20185.571198, 33011.404419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20432.600433, 32305.710907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22797.177490, 31441.626312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21514.589920, 31461.621338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20553.278152, 31235.388947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23520.057007, 30837.094727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23171.510071, 31187.014313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21588.752853, 30490.507202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24251.548000, 30412.044000, 1364.216039, 657.926419, 217.755000, X, Y) && !ellipse(22681.622000, 30188.710000, 1011.488029, 1011.488029, 0.000000, X, Y) && !ellipse(24042.160000, 30643.740000, 1332.680038, 1332.680038, 0.000000, X, Y) && !ellipse(23382.953949, 29648.618652, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 01:47:35 2012] Writing fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src15.gif
[Fri Jun 15 02:04:55 2012] Mean detx,y = (-11740.24, -235.11) 
[Fri Jun 15 02:04:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 02:05:28 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 02:05:28 2012] Setting source spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun 15 02:05:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Jun 15 04:03:52 2012] Updating aperture counts using extracted products
[Fri Jun 15 04:03:52 2012] Error reading totcts from fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun 15 04:03:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:03:53 2012] Using photon index=1.80, rate=0.626, arf fullrun_pn_xmm0021140501_pi300-10000_pass1_cl_src15.arf
[Fri Jun 15 04:03:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:03:53 2012] Updating source flux to 3.2e-12
[Fri Jun 15 04:04:06 2012] Flag b found in src. 15 procflags, skipping spectral fitting
[Fri Jun 15 04:04:06 2012] Flag c found in src. 15 procflags, skipping spectral fitting