[Thu Jun 14 14:06:52 2012] Detection parameters:
  Position = (309.8, 302.1) = 17 33 2.73 43 46 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.1 +/- 18.0
  Background counts = 86.6
  Rate = 0.03 +/- 0.005

[Thu Jun 14 14:06:53 2012] Off-axis axis estimate = 0.86'
[Thu Jun 14 19:46:40 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 19:46:40 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Thu Jun 14 19:46:40 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.927
[Thu Jun 14 19:46:40 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.86"
[Thu Jun 14 19:53:09 2012] fullrun_mos1_xmm0021140501_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 14 19:53:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140501_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 19:53:09 2012] fullrun_mos1_xmm0021140501_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 14 19:53:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140501_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 19:53:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021140501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021140501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 19:53:09 2012] fullrun_mos1_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 14 19:53:09 2012] fullrun_mos1_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 14 19:53:09 2012] Fit fullrun_mos1_xmm0021140501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 14 20:07:44 2012] Source 2 is offset by 3.350302 and -5.720386 pixels which is larger than
2 X fitted extent = 0.843310 x 0.843310, not incorporating fit results
[Thu Jun 14 20:07:44 2012] Source 2 is offset by 0.307475 and 8.581706 pixels which is larger than
2 X fitted extent = 1.768938 x 1.768938, not incorporating fit results
[Thu Jun 14 20:07:44 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:07:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:07:44 2012] Assessing source extent using major
[Thu Jun 14 20:07:44 2012] Source does appear to be extended
[Thu Jun 14 20:07:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:07:44 2012] Source is confused with source 1
[Fri Jun 15 01:34:10 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 01:34:10 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Fri Jun 15 01:34:10 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.927
[Fri Jun 15 01:34:10 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.86"
[Fri Jun 15 01:39:27 2012] fullrun_mos1_xmm0021140501_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 01:39:27 2012] fullrun_mos1_xmm0021140501_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 01:39:27 2012] Fit fullrun_mos1_xmm0021140501_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jun 15 01:39:27 2012] fullrun_mos1_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 01:39:27 2012] fullrun_mos1_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 01:39:27 2012] Fit fullrun_mos1_xmm0021140501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 15 01:47:23 2012] Source 2 is offset by 3.666210 and -5.673582 pixels which is larger than
2 X fitted extent = 1.661412 x 0.815632, not incorporating fit results
[Fri Jun 15 01:47:23 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 01:47:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 01:47:23 2012] Assessing source extent using major
[Fri Jun 15 01:47:23 2012] Source does appear to be extended
[Fri Jun 15 01:47:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 03:55:51 2012] XMMSAS src. selection expression = ellipse(26902.572296, 26230.430389, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 03:55:51 2012] Writing source region out to fullrun_mos1_xmm0021140501_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 15 03:55:51 2012] Extracting stamp from image fullrun_mos1_xmm0021140501_pi300-10000_cl_sm2.00.img.gz, (272, 265) - (347, 340)
[Fri Jun 15 03:55:51 2012] XMMSAS bgd. selection expression = annulus(26902.572296, 26230.430389, 1087.500000, 2175.000000, X, Y) && !ellipse(26721.081600, 25568.309200, 1033.448030, 1033.448030, 0.000000, X, Y)
[Fri Jun 15 03:55:51 2012] Writing fullrun_mos1_xmm0021140501_pi300-10000_pass1_cl_src2.gif
[Fri Jun 15 03:56:05 2012] Mean detx,y = (-565.04, -838.32) 
[Fri Jun 15 03:56:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 03:56:10 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 03:56:10 2012] Setting source spectrum file to fullrun_mos1_xmm0021140501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 03:56:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0021140501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 15 04:02:31 2012] Not generating rmf since there are only 90 counts
[Fri Jun 15 04:02:31 2012] rmf not generated due to insufficient counts
[Fri Jun 15 04:03:54 2012] Updating aperture counts using extracted products
[Fri Jun 15 04:03:54 2012] Error reading totcts from fullrun_mos1_xmm0021140501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 04:03:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 04:03:54 2012] Using photon index=1.80, rate=0.0272, arf fullrun_mos1_xmm0021140501_pi300-10000_pass1_cl_src2.arf
[Fri Jun 15 04:03:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 04:03:54 2012] Updating source flux to 2.6e-13
[Fri Jun 15 04:03:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting