[Sat Jul 14 10:37:13 2012] Detection parameters: Position = (330.1, 295.1) = 22 35 59.58 33 58 4.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 505.6 +/- 28.6 Background counts = 19.3 Rate = 0.01 +/- 0.0007 [Sat Jul 14 10:37:15 2012] Off-axis axis estimate = 2.31' [Sat Jul 14 15:00:40 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting [Sat Jul 14 15:00:40 2012] Initial guess for spatial extent in simple fitting = 7.58" [Sat Jul 14 15:00:40 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.795 [Sat Jul 14 15:00:40 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.58" [Sat Jul 14 16:40:47 2012] fullrun_mos2_xmm0021140201_pi300-10000_cl_pass0_src2.ximg exists [Sat Jul 14 16:40:47 2012] fullrun_mos2_xmm0021140201_pi300-10000_cl_pass0_src2_1.ximg exists [Sat Jul 14 16:40:47 2012] Fit fullrun_mos2_xmm0021140201_pi300-10000_cl_pass0_src2 appears to have run properly [Sat Jul 14 16:40:48 2012] fullrun_mos2_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Sat Jul 14 16:40:48 2012] fullrun_mos2_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Sat Jul 14 16:40:48 2012] Fit fullrun_mos2_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Sat Jul 14 16:41:22 2012] Spatial fit model total counts = 1509.660000, observed total counts = 1490.000000 [Sat Jul 14 16:41:22 2012] Offset between fit and detection position for source 1 = 1.225318 pixels [Sat Jul 14 16:41:22 2012] 1457.453000 total counts/ 900.473000 bgd. counts: snr = 18.561123 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.225318 pixels Position = (329.6, 296.2) = 22 35 59.76 33 58 9.9 Extent = 12.1 (10.6-14.7)", rotation angle = 0 Source counts = 557.0 +/- 38.2 Background counts = 900.5 Rate = 0.01 +/- 0.0008 [Sat Jul 14 16:41:22 2012] Vigneting correction estimate = 1.000000 [Sat Jul 14 16:41:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 14 16:41:22 2012] Assessing source extent using major axis lower bound [Sat Jul 14 16:41:22 2012] Source does appear to be extended [Sat Jul 14 16:41:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jul 14 16:41:22 2012] Source is confused with source 28 [Sat Jul 14 20:27:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jul 14 20:27:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jul 14 20:27:20 2012] Initial guess for spatial extent in simple fitting = 12.10" [Sat Jul 14 20:27:20 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.137 [Sat Jul 14 20:27:20 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.10" [Sat Jul 14 21:52:05 2012] fullrun_mos2_xmm0021140201_pi300-10000_cl_pass1_src2.ximg exists [Sat Jul 14 21:52:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021140201_pi300-10000_cl_pass1_src2.csv [Sat Jul 14 21:52:05 2012] fullrun_mos2_xmm0021140201_pi300-10000_cl_pass1_src2_1.ximg exists [Sat Jul 14 21:52:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0021140201_pi300-10000_cl_pass1_src2.csv [Sat Jul 14 21:52:05 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0021140201_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0021140201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 14 21:52:05 2012] fullrun_mos2_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Sat Jul 14 21:52:05 2012] fullrun_mos2_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Sat Jul 14 21:52:05 2012] Fit fullrun_mos2_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Sat Jul 14 21:52:38 2012] Warning, spatial fit 2 centroid is now closest to src. 28 [Sat Jul 14 21:52:38 2012] Spatial fit model total counts = 1120.730000, observed total counts = 1117.000000 [Sat Jul 14 21:52:38 2012] Offset between fit and detection position for source 1 = 1.726100 pixels [Sat Jul 14 21:52:38 2012] Warning, changing simple spatial fit ID from 2 to 13 [Sat Jul 14 21:52:38 2012] 846.175000 total counts/ 718.527000 bgd. counts: snr = 4.762034 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.726100 pixels Position = (330.7, 295.0) = 22 35 59.35 33 58 4.4 Extent = 5.9 (4.7-7.3)", rotation angle = 0 Source counts = 127.6 +/- 29.1 Background counts = 718.5 Rate = 0.003 +/- 0.0006 [Sat Jul 14 21:52:39 2012] Vigneting correction estimate = 1.000000 [Sat Jul 14 21:52:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 14 21:52:39 2012] Assessing source extent using major axis lower bound [Sat Jul 14 21:52:39 2012] Source does appear to be extended [Sat Jul 14 21:52:39 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jul 15 03:28:07 2012] XMMSAS src. selection expression = ellipse(28725.598000, 25613.416800, 356.875210, 356.875210, 0.000000, X, Y) [Sun Jul 15 03:28:07 2012] Writing source region out to fullrun_mos2_xmm0021140201_pi300-10000_pass1_cl_src1_src.reg [Sun Jul 15 03:28:07 2012] Extracting stamp from image fullrun_mos2_xmm0021140201_pi300-10000_cl_sm2.00.img.gz, (310, 274) - (351, 315) [Sun Jul 15 03:28:07 2012] XMMSAS bgd. selection expression = annulus(28725.598000, 25613.416800, 594.792017, 1189.584034, X, Y) && !ellipse(27698.319092, 26165.517578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28684.582400, 24827.097600, 751.180822, 751.180822, 0.000000, X, Y) && !ellipse(28739.146000, 26277.710000, 1252.328036, 1252.328036, 0.000000, X, Y) && !ellipse(29399.444153, 25356.455811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27726.321686, 24126.752441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30100.977234, 27660.025604, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jul 15 03:28:07 2012] Writing fullrun_mos2_xmm0021140201_pi300-10000_pass1_cl_src1.gif [Sun Jul 15 03:30:52 2012] Mean detx,y = (-1387.09, -552.30) [Sun Jul 15 03:30:53 2012] Setting backscal keywords in source and bgd. spectrum [Sun Jul 15 03:31:00 2012] Binned source spectrum to 10 counts/bin [Sun Jul 15 03:31:00 2012] Setting source spectrum file to fullrun_mos2_xmm0021140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sun Jul 15 03:31:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0021140201_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sun Jul 15 04:18:33 2012] Updating aperture counts using extracted products [Sun Jul 15 04:18:33 2012] Error reading totcts from fullrun_mos2_xmm0021140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sun Jul 15 04:18:34 2012] Calculating source flux in energy range 0.30-8.00 [Sun Jul 15 04:18:34 2012] Using photon index=1.80, rate=0.00282, arf fullrun_mos2_xmm0021140201_pi300-10000_pass1_cl_src1.arf [Sun Jul 15 04:18:34 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jul 15 04:18:34 2012] Updating source flux to 3e-14 [Sun Jul 15 04:19:59 2012] Flag c found in src. 1 procflags, skipping spectral fitting [Sun Jul 15 04:20:56 2012] Reading fit data from xmm0021140201/analysis//spectral/fullrun_mos2_xmm0021140201_pi300-10000_pass1_cl_src1_pl.csv [Sun Jul 15 04:20:56 2012] Spectral fit parameter nH value = 5.77689e+21 [Sun Jul 15 04:20:56 2012] Spectral fit parameter PhoIndex value = 6.01951 [Sun Jul 15 04:20:56 2012] Failed to get F(0.3-8.0) from xmm0021140201/analysis//spectral/fullrun_mos2_xmm0021140201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sun Jul 15 04:20:56 2012] Calculating source flux in energy range 0.30-8.00 [Sun Jul 15 04:20:56 2012] Using Nh = 5.8e+21, photon index=6.02, rate=0.00282, arf fullrun_mos2_xmm0021140201_pi300-10000_pass1_cl_src1.arf [Sun Jul 15 04:20:56 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jul 15 04:20:56 2012] Updating source flux to 1.8e-14