[Sat Jul 14 10:36:08 2012] Detection parameters:
  Position = (310.2, 471.8) = 22 36 6.50 34 10 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.5 +/- 12.7
  Background counts = 11.5
  Rate = 0.002 +/- 0.0003

[Sat Jul 14 10:36:12 2012] Off-axis axis estimate = 12.60'
[Sat Jul 14 13:00:58 2012] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 13:00:58 2012] Initial guess for spatial extent in simple fitting = 12.73"
[Sat Jul 14 13:00:58 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.044
[Sat Jul 14 13:00:58 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.73"
[Sat Jul 14 15:00:35 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src26.ximg exists
[Sat Jul 14 15:00:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src26.csv
[Sat Jul 14 15:00:36 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Jul 14 15:00:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src26.csv
[Sat Jul 14 15:00:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 15:00:39 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Jul 14 15:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Jul 14 15:00:39 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Jul 14 15:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Jul 14 15:00:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:41:12 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 17.573170 pixels away
[Sat Jul 14 16:41:12 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 16:41:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 16:41:12 2012] Assessing source extent using major
[Sat Jul 14 16:41:12 2012] Source does appear to be extended
[Sat Jul 14 16:41:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 18:47:33 2012] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 18:47:33 2012] Initial guess for spatial extent in simple fitting = 12.73"
[Sat Jul 14 18:47:33 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.044
[Sat Jul 14 18:47:33 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.73"
[Sat Jul 14 20:27:19 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_src26.ximg exists
[Sat Jul 14 20:27:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_src26.csv
[Sat Jul 14 20:27:19 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat Jul 14 20:27:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_src26.csv
[Sat Jul 14 20:27:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 20:27:20 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat Jul 14 20:27:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat Jul 14 20:27:20 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Jul 14 20:27:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat Jul 14 20:27:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 21:52:30 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 15.557686 pixels away
[Sat Jul 14 21:52:30 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 21:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 21:52:30 2012] Assessing source extent using major
[Sat Jul 14 21:52:30 2012] Source does appear to be extended
[Sat Jul 14 21:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 02:39:23 2012] XMMSAS src. selection expression = ellipse(26942.381805, 40999.291046, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 15 02:39:23 2012] Writing source region out to fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src8_src.reg
[Sun Jul 15 02:39:23 2012] Extracting stamp from image fullrun_mos1_xmm0021140201_pi300-10000_cl_sm2.00.img.gz, (273, 434) - (348, 509)
[Sun Jul 15 02:39:23 2012] XMMSAS bgd. selection expression = annulus(26942.381805, 40999.291046, 1087.500000, 2175.000000, X, Y) && !ellipse(26086.054000, 39621.786600, 412.253612, 412.253612, 0.000000, X, Y) && !ellipse(27369.010740, 39027.788800, 441.300813, 441.300813, 0.000000, X, Y)
[Sun Jul 15 02:39:23 2012] Writing fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src8.gif
[Sun Jul 15 02:48:26 2012] Mean detx,y = (12397.75, -7669.23) 
[Sun Jul 15 02:48:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 02:48:48 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 02:48:48 2012] Setting source spectrum file to fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jul 15 02:48:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jul 15 03:21:46 2012] Not generating rmf since there are only 91 counts
[Sun Jul 15 03:21:46 2012] rmf not generated due to insufficient counts
[Sun Jul 15 04:18:32 2012] Updating aperture counts using extracted products
[Sun Jul 15 04:18:32 2012] Error reading totcts from fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jul 15 04:18:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 04:18:33 2012] Using photon index=1.80, rate=0.00202, arf fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src8.arf
[Sun Jul 15 04:18:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 04:18:33 2012] Updating source flux to 5.1e-14
[Sun Jul 15 04:18:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting