[Sat Jul 14 10:36:07 2012] Detection parameters:
  Position = (329.8, 295.1) = 22 35 59.66 33 58 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 543.9 +/- 29.8
  Background counts = 19.0
  Rate = 0.01 +/- 0.0007

[Sat Jul 14 10:36:12 2012] Off-axis axis estimate = 2.29'
[Sat Jul 14 13:00:58 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 13:00:58 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Sat Jul 14 13:00:58 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.797
[Sat Jul 14 13:00:58 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.57"
[Sat Jul 14 15:00:34 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jul 14 15:00:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src2.csv
[Sat Jul 14 15:00:34 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jul 14 15:00:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src2.csv
[Sat Jul 14 15:00:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 15:00:37 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jul 14 15:00:37 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jul 14 15:00:37 2012] Fit fullrun_mos1_xmm0021140201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Jul 14 16:41:12 2012] Source 1 is offset by 4.239379 and -0.306182 pixels which is larger than
2 X fitted extent = 0.824529 x 0.824529, not incorporating fit results
[Sat Jul 14 16:41:12 2012] Spatial fit model total counts = 1605.430000, observed total counts = 1608.000000
[Sat Jul 14 16:41:12 2012] Offset between fit and detection position for source 1 = 0.602404 pixels
[Sat Jul 14 16:41:12 2012] 1459.018000 total counts/ 964.621000 bgd. counts: snr = 15.918329
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.602404 pixels
  Position = (329.5, 295.6) = 22 35 59.77 33 58 7.2
  Extent = 11.3 (9.8-13.3)", rotation angle = 0
  Source counts = 494.4 +/- 38.2
  Background counts = 964.6
  Rate = 0.01 +/- 0.0008
[Sat Jul 14 16:41:12 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 16:41:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 16:41:12 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 16:41:12 2012] Source does appear to be extended
[Sat Jul 14 16:41:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 16:41:12 2012] Source is confused with source 35
[Sat Jul 14 16:41:12 2012] Source is confused with source 30
[Sat Jul 14 18:47:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 18:47:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 18:47:33 2012] Initial guess for spatial extent in simple fitting = 11.28"
[Sat Jul 14 18:47:33 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.097
[Sat Jul 14 18:47:33 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.28"
[Sat Jul 14 20:27:19 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jul 14 20:27:19 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jul 14 20:27:19 2012] Fit fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_src2 appears to have run properly
[Sat Jul 14 20:27:19 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jul 14 20:27:19 2012] fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jul 14 20:27:19 2012] Fit fullrun_mos1_xmm0021140201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jul 14 21:52:29 2012] Warning, spatial fit 2 centroid is now closest to src. 35
[Sat Jul 14 21:52:30 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 21:52:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 21:52:30 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 21:52:30 2012] Source does appear to be extended
[Sat Jul 14 21:52:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 02:39:23 2012] XMMSAS src. selection expression = ellipse(28620.540000, 25670.109800, 676.974019, 676.974019, 0.000000, X, Y)
[Sun Jul 15 02:39:23 2012] Writing source region out to fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 15 02:39:23 2012] Extracting stamp from image fullrun_mos1_xmm0021140201_pi300-10000_cl_sm2.00.img.gz, (291, 257) - (368, 335)
[Sun Jul 15 02:39:23 2012] XMMSAS bgd. selection expression = annulus(28620.540000, 25670.109800, 1128.290032, 2256.580065, X, Y) && !ellipse(27688.293701, 26145.280945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28569.971000, 25830.436000, 1053.960030, 1053.960030, 0.000000, X, Y) && !ellipse(28638.950000, 26208.368000, 1253.896036, 825.408024, 126.653000, X, Y) && !ellipse(29420.256927, 25356.203583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29214.882446, 26648.432892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26950.015000, 23633.577200, 354.547210, 354.547210, 0.000000, X, Y) && !ellipse(30088.862800, 27625.046800, 254.748807, 254.748807, 0.000000, X, Y) && !ellipse(30664.888568, 23893.230800, 893.792026, 419.225612, 81.957820, X, Y)
[Sun Jul 15 02:39:23 2012] Writing fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src1.gif
[Sun Jul 15 02:42:37 2012] Mean detx,y = (-334.61, 1109.89) 
[Sun Jul 15 02:42:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 02:42:48 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 02:42:48 2012] Setting source spectrum file to fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 02:42:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 15 04:18:32 2012] Updating aperture counts using extracted products
[Sun Jul 15 04:18:32 2012] Error reading totcts from fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 04:18:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 04:18:32 2012] Using photon index=1.80, rate=0.0109, arf fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 15 04:18:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 04:18:32 2012] Updating source flux to 1e-13
[Sun Jul 15 04:18:36 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Sun Jul 15 04:18:36 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jul 15 04:19:59 2012] Reading fit data from xmm0021140201/analysis//spectral/fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 15 04:19:59 2012] Spectral fit parameter nH value = 7.97144e+21
[Sun Jul 15 04:19:59 2012] Spectral fit parameter PhoIndex value = 7.61729
[Sun Jul 15 04:19:59 2012] Failed to get F(0.3-8.0) from xmm0021140201/analysis//spectral/fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 04:19:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 04:19:59 2012] Using Nh = 8e+21, photon index=7.62, rate=0.0109, arf fullrun_mos1_xmm0021140201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 15 04:19:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 04:19:59 2012] Updating source flux to 6.1e-14