[Wed Jun 5 21:21:38 2013] Detection parameters: Position = (372.4, 208.9) = 13 9 30.44 32 17 42.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 159.8 +/- 17.3 Background counts = 38.0 Rate = 0.006 +/- 0.0007 [Wed Jun 5 21:21:38 2013] Off-axis axis estimate = 8.42' [Wed Jun 5 21:25:09 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 21:25:09 2013] Initial guess for spatial extent in simple fitting = 10.64" [Wed Jun 5 21:25:09 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.037 [Wed Jun 5 21:25:09 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 10.64" [Thu Jun 6 00:20:18 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src70.ximg exists [Thu Jun 6 00:20:18 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src70.csv [Thu Jun 6 00:20:18 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src70_1.ximg exists [Thu Jun 6 00:20:18 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src70.csv [Thu Jun 6 00:20:18 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src70_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 00:20:19 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src70.ximg exists [Thu Jun 6 00:20:19 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src70.csv [Thu Jun 6 00:20:19 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists [Thu Jun 6 00:20:19 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src70.csv [Thu Jun 6 00:20:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src70_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 03:01:49 2013] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 71 at 12.421422 pixels away [Thu Jun 6 03:01:49 2013] Source 71 is offset by 3.458891 and 4.949262 pixels which is larger than 2 X fitted extent = 1.243724 x 1.243724, not incorporating fit results [Thu Jun 6 03:01:49 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 03:01:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 03:01:49 2013] Assessing source extent using major [Thu Jun 6 03:01:49 2013] Source does appear to be extended [Thu Jun 6 03:01:49 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 03:02:24 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 03:02:24 2013] Initial guess for spatial extent in simple fitting = 10.64" [Thu Jun 6 03:02:24 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.037 [Thu Jun 6 03:02:24 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 10.64" [Thu Jun 6 07:42:55 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src68.ximg exists [Thu Jun 6 07:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src68.csv [Thu Jun 6 07:42:55 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src68_1.ximg exists [Thu Jun 6 07:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src68.csv [Thu Jun 6 07:42:55 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src68_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 07:42:56 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src68.ximg exists [Thu Jun 6 07:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src68.csv [Thu Jun 6 07:42:56 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists [Thu Jun 6 07:42:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src68.csv [Thu Jun 6 07:42:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src68_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 09:52:01 2013] Warning, spatial fit 68 centroid is now closest to src. 10 [Thu Jun 6 09:52:01 2013] Source 71 is offset by 3.458891 and 4.949262 pixels which is larger than 2 X fitted extent = 1.243724 x 1.243724, not incorporating fit results [Thu Jun 6 09:52:01 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 09:52:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 09:52:01 2013] Assessing source extent using major [Thu Jun 6 09:52:01 2013] Source does appear to be extended [Thu Jun 6 09:52:01 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 09:52:34 2013] XMMSAS src. selection expression = ellipse(32351.053497, 18125.715836, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jun 6 09:52:34 2013] Writing source region out to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src71_src.reg [Thu Jun 6 09:52:34 2013] Extracting stamp from image fullrun_pn_xmm0020540401_pi300-10000_cl_sm2.00.img.gz, (335, 171) - (410, 246) [Thu Jun 6 09:52:34 2013] XMMSAS bgd. selection expression = annulus(32351.053497, 18125.715836, 1087.500000, 2175.000000, X, Y) && !ellipse(31851.907990, 19253.322708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.836200, 19710.877600, 468.168813, 327.803209, 338.872117, X, Y) && !ellipse(29944.439362, 16839.644867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31146.474670, 16764.761093, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jun 6 09:52:34 2013] Writing fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src71.gif [Thu Jun 6 10:51:19 2013] Mean detx,y = (-1604.31, -8614.68) [Thu Jun 6 10:51:22 2013] Setting backscal keywords in source and bgd. spectrum [Thu Jun 6 10:51:43 2013] Binned source spectrum to 10 counts/bin [Thu Jun 6 10:51:43 2013] Setting source spectrum file to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src71_src_b10.pi.gz [Thu Jun 6 10:51:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src71_bgd.pi.gz [Thu Jun 6 12:03:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Jun 6 12:03:16 2013] rmf not generated due to insufficient counts [Thu Jun 6 13:56:44 2013] Updating aperture counts using extracted products [Thu Jun 6 13:56:44 2013] Total counts from fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src71_src_b10.pi.gz = 357.00 [Thu Jun 6 13:56:44 2013] Total counts from fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src71_bgd.pi.gz = 1048.00 [Thu Jun 6 13:56:44 2013] Got source and background scale factors 1173330.000000, 6177919.000000 [Thu Jun 6 13:56:44 2013] User source parameters: Position = (372.4, 208.9) = 13 9 30.44 32 17 42.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 158.0 +/- 19.9 Background aperture counts = 199.0 Rate = 0.003 +/- 0.0004 [Thu Jun 6 13:56:44 2013] Updating counts from extracted products [Thu Jun 6 13:56:44 2013] Set source signif. to 157.96/14.11 = 11.20 [Thu Jun 6 13:56:47 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jun 6 13:56:47 2013] Using photon index=1.80, rate=0.00335, arf fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src71.arf [Thu Jun 6 13:56:47 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 6 13:56:47 2013] Updating source flux to 1.5e-14 [Thu Jun 6 13:57:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Jun 6 13:57:25 2013] xmm0020540401/analysis//spectral/fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete