[Wed Jun 5 21:21:38 2013] Detection parameters: Position = (196.0, 244.8) = 13 10 30.98 32 20 16.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 121.3 +/- 22.3 Background counts = 48.3 Rate = 0.005 +/- 0.0008 [Wed Jun 5 21:21:38 2013] Off-axis axis estimate = 8.38' [Wed Jun 5 21:25:09 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 21:25:09 2013] Initial guess for spatial extent in simple fitting = 10.62" [Wed Jun 5 21:25:09 2013] source mask rpix=2.4, npix_max = 34, mask sum = 31, frac = 0.896 [Wed Jun 5 21:25:09 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 10.62" [Thu Jun 6 00:20:18 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src61.ximg exists [Thu Jun 6 00:20:18 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src61_1.ximg exists [Thu Jun 6 00:20:18 2013] Fit fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src61 appears to have run properly [Thu Jun 6 00:20:19 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src61.ximg exists [Thu Jun 6 00:20:19 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists [Thu Jun 6 00:20:19 2013] Fit fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly [Thu Jun 6 03:01:49 2013] Warning, spatial fit 61 centroid is now closest to src. 2 [Thu Jun 6 03:01:49 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 03:01:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 03:01:49 2013] Assessing source extent using major [Thu Jun 6 03:01:49 2013] Source does appear to be extended [Thu Jun 6 03:01:49 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 03:01:50 2013] Source is confused with source 57 [Thu Jun 6 03:02:24 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 03:02:24 2013] Initial guess for spatial extent in simple fitting = 10.62" [Thu Jun 6 03:02:24 2013] source mask rpix=2.4, npix_max = 34, mask sum = 31, frac = 0.896 [Thu Jun 6 03:02:24 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 10.62" [Thu Jun 6 07:42:55 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src60.ximg exists [Thu Jun 6 07:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src60.csv [Thu Jun 6 07:42:55 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src60_1.ximg exists [Thu Jun 6 07:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src60.csv [Thu Jun 6 07:42:55 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src60_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 07:42:56 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src60.ximg exists [Thu Jun 6 07:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src60.csv [Thu Jun 6 07:42:56 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists [Thu Jun 6 07:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src60.csv [Thu Jun 6 07:42:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src60_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 09:52:00 2013] Source 61 is offset by -6.866126 and -5.731674 pixels which is larger than 2 X fitted extent = 2.331637 x 2.331637, not incorporating fit results [Thu Jun 6 09:52:01 2013] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 12.934427 pixels away [Thu Jun 6 09:52:01 2013] Spatial fit model total counts = 2598.550000, observed total counts = 1773.000000 [Thu Jun 6 09:52:01 2013] Poor agreement between spatial fit and data for source 61 It may help to tweak spatial fit manually Not incorporating fit results [Thu Jun 6 09:52:01 2013] Warning, spatial fit 60 centroid is now closest to src. 2 [Thu Jun 6 09:52:01 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 09:52:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 09:52:01 2013] Assessing source extent using major [Thu Jun 6 09:52:01 2013] Source does appear to be extended [Thu Jun 6 09:52:01 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 09:52:34 2013] XMMSAS src. selection expression = ellipse(17002.525604, 21249.724197, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jun 6 09:52:34 2013] Writing source region out to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src61_src.reg [Thu Jun 6 09:52:34 2013] Extracting stamp from image fullrun_pn_xmm0020540401_pi300-10000_cl_sm2.00.img.gz, (158, 207) - (233, 282) [Thu Jun 6 09:52:34 2013] XMMSAS bgd. selection expression = annulus(17002.525604, 21249.724197, 1087.500000, 2175.000000, X, Y) && !ellipse(17587.594000, 21752.534000, 1011.768029, 858.619225, 90.166561, X, Y) && !ellipse(15966.515915, 23967.280762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16502.002136, 23264.422821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19262.939000, 23406.367600, 1511.888044, 1511.888044, 0.000000, X, Y) && !ellipse(16505.890427, 22115.253128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16622.519226, 21649.181320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14677.696991, 21801.391495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17731.153259, 20352.670776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18996.367645, 19965.080307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19269.401566, 19451.653397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19727.634399, 18790.401093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18687.372681, 18549.685516, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jun 6 09:52:34 2013] Writing fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src61.gif [Thu Jun 6 10:43:22 2013] Mean detx,y = (8441.88, 2973.47) [Thu Jun 6 10:43:30 2013] Setting backscal keywords in source and bgd. spectrum [Thu Jun 6 10:43:49 2013] Binned source spectrum to 10 counts/bin [Thu Jun 6 10:43:50 2013] Setting source spectrum file to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src61_src_b10.pi.gz [Thu Jun 6 10:43:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src61_bgd.pi.gz [Thu Jun 6 11:58:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Jun 6 11:58:08 2013] rmf not generated due to insufficient counts [Thu Jun 6 13:56:42 2013] Updating aperture counts using extracted products [Thu Jun 6 13:56:42 2013] Total counts from fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 5310.00 [Thu Jun 6 13:56:42 2013] Total counts from fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src61_bgd.pi.gz = 1792.00 [Thu Jun 6 13:56:42 2013] Got source and background scale factors 1128976.000000, 4569405.000000 [Thu Jun 6 13:56:42 2013] User source parameters: Position = (196.0, 244.8) = 13 10 30.98 32 20 16.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 4867.2 +/- 73.9 Background aperture counts = 442.8 Rate = 0.1 +/- 0.002 [Thu Jun 6 13:56:42 2013] Updating counts from extracted products [Thu Jun 6 13:56:42 2013] Set source signif. to 4867.25/21.04 = 231.31 [Thu Jun 6 13:56:46 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jun 6 13:56:46 2013] Using photon index=1.80, rate=0.103, arf fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src61.arf [Thu Jun 6 13:56:46 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 6 13:56:46 2013] Updating source flux to 4.3e-13 [Thu Jun 6 13:57:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Jun 6 13:57:25 2013] xmm0020540401/analysis//spectral/fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete