[Wed Jun  5 21:21:37 2013] Detection parameters:
  Position = (158.2, 312.0) = 13 10 43.98 32 25 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.0 +/- 14.5
  Background counts = 49.1
  Rate = 0.002 +/- 0.0003

[Wed Jun  5 21:21:38 2013] Off-axis axis estimate = 10.21'
[Wed Jun  5 21:25:09 2013] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 21:25:09 2013] Initial guess for spatial extent in simple fitting = 11.53"
[Wed Jun  5 21:25:09 2013] source mask rpix=2.7, npix_max = 39, mask sum = 32, frac = 0.805
[Wed Jun  5 21:25:09 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 11.53"
[Thu Jun  6 00:20:17 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src37.ximg exists
[Thu Jun  6 00:20:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src37.csv
[Thu Jun  6 00:20:17 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu Jun  6 00:20:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src37.csv
[Thu Jun  6 00:20:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 00:20:18 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu Jun  6 00:20:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu Jun  6 00:20:18 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu Jun  6 00:20:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu Jun  6 00:20:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 03:01:49 2013] Warning, spatial fit 37 centroid is now closest to src. 35
[Thu Jun  6 03:01:49 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 03:01:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 03:01:49 2013] Assessing source extent using major
[Thu Jun  6 03:01:49 2013] Source does appear to be extended
[Thu Jun  6 03:01:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 03:01:50 2013] Source is confused with source 36
[Thu Jun  6 03:02:24 2013] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 03:02:24 2013] Initial guess for spatial extent in simple fitting = 11.53"
[Thu Jun  6 03:02:24 2013] source mask rpix=2.7, npix_max = 39, mask sum = 32, frac = 0.805
[Thu Jun  6 03:02:24 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 11.53"
[Thu Jun  6 07:42:55 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src36.ximg exists
[Thu Jun  6 07:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src36.csv
[Thu Jun  6 07:42:55 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src36_1.ximg exists
[Thu Jun  6 07:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src36.csv
[Thu Jun  6 07:42:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 07:42:56 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Thu Jun  6 07:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src36.csv
[Thu Jun  6 07:42:56 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Thu Jun  6 07:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src36.csv
[Thu Jun  6 07:42:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 09:52:01 2013] Spatial fit model total counts = 772.058000, observed total counts = 621.000000
[Thu Jun  6 09:52:01 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 09:52:01 2013] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 15.537801 pixels away
[Thu Jun  6 09:52:01 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 09:52:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 09:52:01 2013] Assessing source extent using major
[Thu Jun  6 09:52:01 2013] Source does appear to be extended
[Thu Jun  6 09:52:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 09:52:33 2013] XMMSAS src. selection expression = ellipse(13718.327377, 27098.370087, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 09:52:33 2013] Writing source region out to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src37_src.reg
[Thu Jun  6 09:52:33 2013] Extracting stamp from image fullrun_pn_xmm0020540401_pi300-10000_cl_sm2.00.img.gz, (121, 275) - (196, 350)
[Thu Jun  6 09:52:33 2013] XMMSAS bgd. selection expression = annulus(13718.327377, 27098.370087, 1087.500000, 2175.000000, X, Y) && !ellipse(11885.923065, 29539.425262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12241.512466, 29105.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12733.263718, 28414.584930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13391.456100, 27527.491852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14147.377457, 26495.333282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15078.168335, 25265.478577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15695.517075, 24640.582916, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  6 09:52:33 2013] Writing fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src37.gif
[Thu Jun  6 10:24:51 2013] Mean detx,y = (8096.64, 9593.46) 
[Thu Jun  6 10:24:55 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 10:25:16 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 10:25:17 2013] Setting source spectrum file to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Thu Jun  6 10:25:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Thu Jun  6 11:31:25 2013] Not generating rmf since there are only 91 counts
[Thu Jun  6 11:31:25 2013] rmf not generated due to insufficient counts
[Thu Jun  6 13:56:38 2013] Updating aperture counts using extracted products
[Thu Jun  6 13:56:38 2013] Total counts from fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 406.00
[Thu Jun  6 13:56:38 2013] Total counts from fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src37_bgd.pi.gz = 1483.00
[Thu Jun  6 13:56:38 2013] Got source and background scale factors 870189.000000, 7460337.000000
[Thu Jun  6 13:56:38 2013] User source parameters:
  Position = (158.2, 312.0) = 13 10 43.98 32 25 11.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 233.0 +/- 21.2
  Background aperture counts = 173.0
  Rate = 0.005 +/- 0.0004

[Thu Jun  6 13:56:38 2013] Updating counts from extracted products
[Thu Jun  6 13:56:38 2013] Set source signif. to 233.02/13.15 = 17.72
[Thu Jun  6 13:56:46 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 13:56:46 2013] Using photon index=1.80, rate=0.00495, arf fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src37.arf
[Thu Jun  6 13:56:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 13:56:46 2013] Updating source flux to 2.9e-14
[Thu Jun  6 13:57:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun  6 13:57:25 2013] xmm0020540401/analysis//spectral/fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete