[Wed Jun 5 21:21:37 2013] Detection parameters: Position = (132.7, 347.5) = 13 10 52.80 32 27 44.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 75.5 +/- 12.5 Background counts = 38.0 Rate = 0.002 +/- 0.0003 [Wed Jun 5 21:21:38 2013] Off-axis axis estimate = 12.53' [Wed Jun 5 21:25:09 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 21:25:09 2013] Initial guess for spatial extent in simple fitting = 12.70" [Wed Jun 5 21:25:09 2013] source mask rpix=2.9, npix_max = 46, mask sum = 37, frac = 0.792 [Wed Jun 5 21:25:09 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 12.70" [Thu Jun 6 00:20:17 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src31.ximg exists [Thu Jun 6 00:20:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src31.csv [Thu Jun 6 00:20:17 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src31_1.ximg exists [Thu Jun 6 00:20:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src31.csv [Thu Jun 6 00:20:17 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 00:20:18 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists [Thu Jun 6 00:20:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src31.csv [Thu Jun 6 00:20:18 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists [Thu Jun 6 00:20:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src31.csv [Thu Jun 6 00:20:18 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 03:01:49 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 15.340065 pixels away [Thu Jun 6 03:01:49 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 03:01:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 03:01:49 2013] Assessing source extent using major [Thu Jun 6 03:01:49 2013] Source does appear to be extended [Thu Jun 6 03:01:49 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 03:02:24 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 03:02:24 2013] Initial guess for spatial extent in simple fitting = 12.70" [Thu Jun 6 03:02:24 2013] source mask rpix=2.9, npix_max = 46, mask sum = 37, frac = 0.792 [Thu Jun 6 03:02:24 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 12.70" [Thu Jun 6 07:42:55 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src30.ximg exists [Thu Jun 6 07:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src30.csv [Thu Jun 6 07:42:55 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src30_1.ximg exists [Thu Jun 6 07:42:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src30.csv [Thu Jun 6 07:42:55 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 07:42:56 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists [Thu Jun 6 07:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src30.csv [Thu Jun 6 07:42:56 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists [Thu Jun 6 07:42:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src30.csv [Thu Jun 6 07:42:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 09:52:01 2013] Source 31 is offset by 5.888209 and -3.159870 pixels which is larger than 2 X fitted extent = 1.459260 x 1.459260, not incorporating fit results [Thu Jun 6 09:52:01 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 09:52:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 09:52:01 2013] Assessing source extent using major [Thu Jun 6 09:52:01 2013] Source does appear to be extended [Thu Jun 6 09:52:01 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 09:52:33 2013] XMMSAS src. selection expression = ellipse(11492.490204, 30181.727295, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jun 6 09:52:33 2013] Writing source region out to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src31_src.reg [Thu Jun 6 09:52:33 2013] Extracting stamp from image fullrun_pn_xmm0020540401_pi300-10000_cl_sm2.00.img.gz, (95, 310) - (170, 385) [Thu Jun 6 09:52:33 2013] XMMSAS bgd. selection expression = annulus(11492.490204, 30181.727295, 1087.500000, 2175.000000, X, Y) && !ellipse(11885.923065, 29539.425262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12241.512466, 29105.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12733.263718, 28414.584930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13391.456100, 27527.491852, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jun 6 09:52:33 2013] Writing fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src31.gif [Thu Jun 6 10:20:06 2013] Mean detx,y = (8067.27, 13220.18) [Thu Jun 6 10:20:10 2013] Setting backscal keywords in source and bgd. spectrum [Thu Jun 6 10:20:36 2013] Binned source spectrum to 10 counts/bin [Thu Jun 6 10:20:36 2013] Setting source spectrum file to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Thu Jun 6 10:20:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src31_bgd.pi.gz [Thu Jun 6 11:29:41 2013] Not generating rmf since there are only 75 counts [Thu Jun 6 11:29:41 2013] rmf not generated due to insufficient counts [Thu Jun 6 13:56:37 2013] Updating aperture counts using extracted products [Thu Jun 6 13:56:37 2013] Total counts from fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 237.00 [Thu Jun 6 13:56:37 2013] Total counts from fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src31_bgd.pi.gz = 654.00 [Thu Jun 6 13:56:37 2013] Got source and background scale factors 583811.000000, 1083902.000000 [Thu Jun 6 13:56:37 2013] User source parameters: Position = (132.7, 347.5) = 13 10 52.80 32 27 44.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -115.3 +/- 16.4 Background aperture counts = 352.3 Rate = -0.002 +/- 0.0003 [Thu Jun 6 13:56:37 2013] Updating counts from extracted products [Thu Jun 6 13:56:37 2013] Set source signif. to -115.26/18.77 = -6.14 [Thu Jun 6 13:56:46 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jun 6 13:56:46 2013] Using photon index=1.80, rate=-0.00245, arf fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src31.arf [Thu Jun 6 13:56:46 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 6 13:56:46 2013] Updated flux is not positive, keeping original flux [Thu Jun 6 13:57:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Jun 6 13:57:25 2013] xmm0020540401/analysis//spectral/fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete