[Wed Jun 5 21:21:36 2013] Detection parameters: Position = (366.7, 221.9) = 13 9 32.41 32 18 42.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 340.8 +/- 21.8 Background counts = 38.4 Rate = 0.007 +/- 0.0005 [Wed Jun 5 21:21:38 2013] Off-axis axis estimate = 7.44' [Wed Jun 5 21:25:09 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 21:25:09 2013] Initial guess for spatial extent in simple fitting = 10.15" [Wed Jun 5 21:25:09 2013] source mask rpix=2.3, npix_max = 32, mask sum = 27, frac = 0.841 [Wed Jun 5 21:25:09 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.15" [Thu Jun 6 00:20:17 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src10.ximg exists [Thu Jun 6 00:20:17 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src10.csv [Thu Jun 6 00:20:17 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src10_1.ximg exists [Thu Jun 6 00:20:17 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src10.csv [Thu Jun 6 00:20:17 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 00:20:18 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Thu Jun 6 00:20:18 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src10.csv [Thu Jun 6 00:20:18 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Thu Jun 6 00:20:18 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src10.csv [Thu Jun 6 00:20:18 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 03:01:49 2013] Spatial fit model total counts = -744.933000, observed total counts = 553.000000 [Thu Jun 6 03:01:49 2013] Poor agreement between spatial fit and data for source 10 It may help to tweak spatial fit manually Not incorporating fit results [Thu Jun 6 03:01:49 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 03:01:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 03:01:49 2013] Assessing source extent using major [Thu Jun 6 03:01:49 2013] Source does appear to be extended [Thu Jun 6 03:01:49 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 03:02:24 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 03:02:24 2013] Initial guess for spatial extent in simple fitting = 10.15" [Thu Jun 6 03:02:24 2013] source mask rpix=2.3, npix_max = 32, mask sum = 27, frac = 0.841 [Thu Jun 6 03:02:24 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.15" [Thu Jun 6 07:42:54 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src10.ximg exists [Thu Jun 6 07:42:54 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src10.csv [Thu Jun 6 07:42:54 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src10_1.ximg exists [Thu Jun 6 07:42:54 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src10.csv [Thu Jun 6 07:42:54 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 07:42:56 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Thu Jun 6 07:42:56 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src10.csv [Thu Jun 6 07:42:56 2013] fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Thu Jun 6 07:42:56 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src10.csv [Thu Jun 6 07:42:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0020540401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 6 09:52:00 2013] Source 10 is offset by 9.994621 and 0.131204 pixels which is larger than 2 X fitted extent = 8.977609 x 9.330207, not incorporating fit results [Thu Jun 6 09:52:01 2013] Source 10 is offset by 4.454069 and 2.077318 pixels which is larger than 2 X fitted extent = 1.222841 x 1.222841, not incorporating fit results [Thu Jun 6 09:52:01 2013] Vigneting correction estimate = 1.000000 [Thu Jun 6 09:52:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 6 09:52:01 2013] Assessing source extent using major [Thu Jun 6 09:52:01 2013] Source does appear to be extended [Thu Jun 6 09:52:01 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 6 09:52:32 2013] XMMSAS src. selection expression = ellipse(31851.907990, 19253.322708, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jun 6 09:52:32 2013] Writing source region out to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src10_src.reg [Thu Jun 6 09:52:32 2013] Extracting stamp from image fullrun_pn_xmm0020540401_pi300-10000_cl_sm2.00.img.gz, (329, 184) - (404, 259) [Thu Jun 6 09:52:32 2013] XMMSAS bgd. selection expression = annulus(31851.907990, 19253.322708, 1087.500000, 2175.000000, X, Y) && !ellipse(29762.836200, 19710.877600, 468.168813, 327.803209, 338.872117, X, Y) && !ellipse(32351.053497, 18125.715836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29944.439362, 16839.644867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31146.474670, 16764.761093, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jun 6 09:52:32 2013] Writing fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src10.gif [Thu Jun 6 10:04:49 2013] Mean detx,y = (-1834.05, -7386.97) [Thu Jun 6 10:04:53 2013] Setting backscal keywords in source and bgd. spectrum [Thu Jun 6 10:05:14 2013] Binned source spectrum to 10 counts/bin [Thu Jun 6 10:05:14 2013] Setting source spectrum file to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Thu Jun 6 10:05:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src10_bgd.pi.gz [Thu Jun 6 11:16:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Jun 6 11:16:52 2013] rmf not generated due to insufficient counts [Thu Jun 6 13:56:33 2013] Updating aperture counts using extracted products [Thu Jun 6 13:56:33 2013] Total counts from fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 450.00 [Thu Jun 6 13:56:33 2013] Total counts from fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src10_bgd.pi.gz = 1267.00 [Thu Jun 6 13:56:34 2013] Got source and background scale factors 936587.000000, 7063836.000000 [Thu Jun 6 13:56:34 2013] User source parameters: Position = (366.7, 221.9) = 13 9 32.41 32 18 42.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 282.0 +/- 22.2 Background aperture counts = 168.0 Rate = 0.006 +/- 0.0005 [Thu Jun 6 13:56:34 2013] Updating counts from extracted products [Thu Jun 6 13:56:34 2013] Set source signif. to 282.01/12.96 = 21.76 [Thu Jun 6 13:56:46 2013] Calculating source flux in energy range 0.30-8.00 [Thu Jun 6 13:56:46 2013] Using photon index=1.80, rate=0.00599, arf fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src10.arf [Thu Jun 6 13:56:46 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 6 13:56:46 2013] Updating source flux to 5.1e-14 [Thu Jun 6 13:57:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Jun 6 13:57:25 2013] xmm0020540401/analysis//spectral/fullrun_pn_xmm0020540401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete